Tutorial Inventor - 178 Right Angle Coupler
HTML-код
- Опубликовано: 21 авг 2024
- Every tutorial brings new abilities.
You can slow the film on RUclips by using Settings (bottom right), selecting Normal, and choosing a subunitary Playback speed. If you misunderstand what I say by voice, then click on the CC and activate the English auto-generated subtitling
============================
IMPORTANT - Oriunde s-ar afla în lume, vorbitorii de limba română pot cumpăra foarte ușor și la un preț mic cărțile mele în format PDF de aici: play.google.co...
În principiu este bine să se orienteze spre cărțile „MANUALUL (Inventor - 658 pag.)”, „ÎNDRUMARUL (Inventor - 374 pag.)” și „ALBUMUL (Orice CAD - 208 pag.)”
============================
You can read more about me here: grabcad.com/co...
If you click to SUBSCRIBE you will be immediately advised when a new Tutorial is released!
This special mechanism was in function starting with 1884 and you can watch this here: • Almond noiseless right...
To have access to the ASSETS offered to run this tutorial you must subscribe to membership level 2 (Jorneyman). The subscription will give you access to ALL the assets for one month, but also to get the big POSTER that contains ALL the tutorials - see details in tutorial no. 361. If you do not renew your monthly subscription, you lose access to future updates of these add-ons. Getting the assets only by subscribing to the membership is motivated by the fact that they are created in addition to simply watching the tutorial, which is free.
Amazing videos and one of the most useful channels I know. Thank you so much for sharing your knowledge.
Glad you like them!
Hello Constantin, to the problem: Sleeve part is in collision with main shaft ring when it is in the bottom position. Is it so? (I also do not want to spoil it to others, You can delete the comment if You feel like)
Dear Petr, you're right! There is a collision between the right-angle shaft sleeve: 1 and the RAC fork: 1.
The error was at minute 8:13, when I selected the wrong position of the Fork RAC: 1. At that time, you need to rotate this part by 180 degrees and Pivot: 1 accordingly, so that you place the fork RAC: 1 with the cut cylindrical in the other position.
To avoid this collision, the best solution should be to make symmetrical cylindrical cuts on both sides, but physically, if you try to place the current part in the wrong position, you can not move the mechanism. This means that only when you create this assembly in CAD (as we did) can you make this mistake, but not in real life.
Thanks Petr for the observation and rest assured that many people will benefit from my mistake!
@@prof-stancescu Whoa I did not seen that: I have accidentally placed the Fork RAC in the good position so the mistake was not on my assembly. But there is another one. Place the Sleeve with Right Angle Shaft in the lowest position and move it. It is in collision with the Main Shaft collar (vertical one).
@@petrkubes593 Well, you are right again, but this mistake was placed intentionally by me to see if people are trying to model my mechanisms!!!
You are the first one who observes this mistake! The solution is simple: increase the height of the Stand RAC:1 by 5 mm and everything is OK.
I use to place such intentional mistakes on my students to find out which one is smart, or smartest...
I do not change the height on my site to see if any other guy will find this mistake.
Be quiet and do not let them to know the trick :)
Pane Kubeš,
využívám toho že jste občas v diskuzi.
Chci se zeptat jestli nevíte o práci s Inventorem.
Na začátku své profesní kariéry jsem pracoval jako konstruktér JUS ...to byla práce na prkně. Po 7 letech jsem přešel na kvalitu a do výrobu, kde jsem byl až do důchodu. Teď když mám spoustu volna tak jsem si pořídil Inventor a Catii 5 R21 učím se na tom dělat...hlavně v Inventoru. Už se to učím 2 roky a hodně mě to baví. Nevíte o někom kdo by potřeboval třeba překreslovat původní 2d dokumentaci do Inventoru a nebo rozkreslovat sestavy....něco co by nevyžadovalo být 100% času v kanceláři. Jsem mobilní, pendluji mezi Severomoravským krajem a Prahou.
S pozdravem
Jan Kotrla
Zdravím, zrovna nikoho nehledáme. Ale přeju Vám hodně štěstí a snad něco brzy najdete:)@@user-gi3nk5so2q