I have just completed this job in 2.5 hrs. Thank you for making this tutorial. I couldn't imagine doing it without this video. I agree that the bolts and screws can easily be lost, but attaching a small magnet to the tool being used solves this issue.
Thank you! I've just done the job and this video was very helpful...even if it did take me six hours to do it. I struggled with getting the door mirror under the window frame but eventually realised that you have to do it before fully sliding the frame down into the door. Also, the bolt that's hidden away in the end of the door is prone to falling off the torx driver and I was afraid I'd lose it inside the door, so after trying blue-tack, I superglued the bolt to the end of the torx driver and it worked! Thanks again for another informative video.
Thanks for the vid, it helped allot. It took little less than 2 hours. Only thing i did diffrently was that i removed old glue from the mat and door, and also put new hermedic under it. I reccomend you to do the same or it might start leaking. The whole point is to keep water and wind out. 😘
Very good video,especially torque values ! Only 1 thing missing ; side mirror cable mounts.They are assembled on window line.Must be carefully dismantled...
Thank you for the feedback! We are glad you find our video useful. We are currently working on creating a wider range of tutorials. Stay tuned and follow our latest updates! Best regards, Autodoc Team.
Just done this. Took 3 hours and a lot of patience. Getting the mirror back on is the hardest bit of the process to be fair. Shame this is skipped on video.
Very informative video, I enjoy the detail in all your videos so keep up the good work! Quick Q though, I have done this but on my B6 (virtually identical) however the window now seems to be letting in water from the outside silver trim it seems (between the window and outside rubber seal on the back of the chrome trim) and I'm not sure how this has happened though , any ideas ?
Very good tutorial. However you should have shown how to fit the side mirror after removal because it is very frustrating to do so. Pry tools needed to lift up rubber seals and takes quite some force to do so when reinstalling.
Yes, Its quite different on the CABriolet, just doing it now on my A4 B7 Cabriolet .......frozen windows,,,,,snapped cable! Agggghhh. Just fallen into the trap of trying to order a replacment cable. Unfortunately it looks impossible to just change the cable (£10)without the side spar assembly so now ordered that assembly. By the looks of it you have to get the window out before the side spars (window runners)
I did this in my passenger door like this video. But My switches are no longer working! Same with the door light. But the speakers and window works from the driver door. Any ideas ?
Was everything correctly assembled and connected? Without proper diagnostics it is difficult to say something, we recommend contacting the service of your car.
Where i can find screws & bolts for the door, i went to a bad service they lose some bolts damage the insulation and the door wasn’t closing correctly, i need the screws that fix the windows frame to the door, all of them can some one help me to find them ?
Thanks for this video!!!👍 did a change in drivers door.Took me 2 hours.I have no exp as a mechanic and I did the job with my amateur tools in the parkinkg lot at my house.🪛
![How to change timing belt kit and water pump on AUDI A4 (B7) [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/HvMgxc0f4OM/mqdefault.jpg)
I have just completed this job in 2.5 hrs. Thank you for making this tutorial. I couldn't imagine doing it without this video. I agree that the bolts and screws can easily be lost, but attaching a small magnet to the tool being used solves this issue.
Thank you for your comment! We are pleased to know that our video was useful.
Thank you! I've just done the job and this video was very helpful...even if it did take me six hours to do it. I struggled with getting the door mirror under the window frame but eventually realised that you have to do it before fully sliding the frame down into the door. Also, the bolt that's hidden away in the end of the door is prone to falling off the torx driver and I was afraid I'd lose it inside the door, so after trying blue-tack, I superglued the bolt to the end of the torx driver and it worked! Thanks again for another informative video.
Thank you for sharing your opinion!
Realy helpfull. Changed it in 3 hours :)
Thanks for the vid, it helped allot. It took little less than 2 hours. Only thing i did diffrently was that i removed old glue from the mat and door, and also put new hermedic under it. I reccomend you to do the same or it might start leaking. The whole point is to keep water and wind out. 😘
Thank you very much for your feedback. We are glad that our video was useful to you.
@@autodocuk it saved allot of time and prolly some broken parts, like the trim piece 😅
Very good video,especially torque values ! Only 1 thing missing ; side mirror cable mounts.They are assembled on window line.Must be carefully dismantled...
Best tutorial on here for this job, thanks for taking the time to make the video 👍🏻
Thank you for the video! Very useful! It took me about 2 hours to replace it following the video step by step!
Thank you for the feedback!
We are glad you find our video useful.
We are currently working on creating a wider range of tutorials.
Stay tuned and follow our latest updates!
Best regards,
Autodoc Team.
Great help going to replace my broken one now 👍
Thank you for your comment! We are pleased to know that our video was useful for you.
Thanks that’s a great video very clear and concise
Just done this. Took 3 hours and a lot of patience.
Getting the mirror back on is the hardest bit of the process to be fair. Shame this is skipped on video.
Thank you for the recommendation! We will try to add this information in our new videos.
Great instructions, very helpful. Thanks, Richard
We are glad that you enjoy our work!
Thanks so much, spot on guide!
Thank you for your feedback!
We are glad to know this tutorial was useful to you.
Stay tuned for more!
Best regards, Autodoc team!
Great video AutoDoc.....can you do the same for the Cabriolet as its different on the A4 B7??
Thank you for video. ❤
Very helpful! Perfect details!
Thank you for your comment! We are pleased to know that this our video was useful for you.
Thanks again for this video. I've just fitted another regulator because the one I fitted 10 weeks ago, broke today! I hope this one lasts! 😀
Good video. Almost the same on my Exeo 👍
Thank you for sharing your opinion!
Muito útil! Parabéns!!!
Excelente tutorial muy detallado 👍🏻
Gracias por apreciar.
Very informative video, I enjoy the detail in all your videos so keep up the good work! Quick Q though, I have done this but on my B6 (virtually identical) however the window now seems to be letting in water from the outside silver trim it seems (between the window and outside rubber seal on the back of the chrome trim) and I'm not sure how this has happened though , any ideas ?
Very good tutorial. However you should have shown how to fit the side mirror after removal because it is very frustrating to do so. Pry tools needed to lift up rubber seals and takes quite some force to do so when reinstalling.
You don't have to take the mirror off don't know why he did
Pls if anyone can help, the screw at 3:35 keeps spinning. I can’t get anything to hold the back to unscrew it
Brilliant video mine went on my b6 part is here from use thanks
Thanks for your positive comment! Stay with us!
Thank you so much for doing this. Is there any difference changing the regulator on the cabriolet?
Yes, Its quite different on the CABriolet, just doing it now on my A4 B7 Cabriolet .......frozen windows,,,,,snapped cable! Agggghhh. Just fallen into the trap of trying to order a replacment cable. Unfortunately it looks impossible to just change the cable (£10)without the side spar assembly so now ordered that assembly. By the looks of it you have to get the window out before the side spars (window runners)
The replacement will be similar.
AUTODOC
Well done
If I remove the battery terminal will I lose my radio code? Thanks
No,it stays.Funny is i did not disconnect battery :P
very good when can you do mine
Thanks for your positive comment! Stay with us!
Audi A6/C6 looks to be similar method, thanks.
We are glad that this video was useful to you!
Good 👍👍👍
I did this in my passenger door like this video. But My switches are no longer working! Same with the door light. But the speakers and window works from the driver door. Any ideas ?
Was everything correctly assembled and connected? Without proper diagnostics it is difficult to say something, we recommend contacting the service of your car.
Where i can find screws & bolts for the door, i went to a bad service they lose some bolts damage the insulation and the door wasn’t closing correctly, i need the screws that fix the windows frame to the door, all of them can some one help me to find them ?
Bolts can be purchased at a disassembly site or from an authorized dealer
Part Number please, having issues with which is right(passenger) and which is left(driver)
Why mark where the window will go if you need to put a new regulator on, that's pointless as the new one won't have the marks.....
This
Job
Sucks 😮💨
Thanks for all the high quality tutorials though 🖖
We are glad that this video was useful to you!
Not a job for your average diy er then! 😂
Thanks for this video!!!👍 did a change in drivers door.Took me 2 hours.I have no exp as a mechanic and I did the job with my amateur tools in the parkinkg lot at my house.🪛
Thank you for your feedback! We are pleased to know that our video was helpful for you.
Very detailed , thanks