Комментарии •

  • @benspeeder
    @benspeeder 7 месяцев назад

    Thanks for a well produced and detailed Vid. I'm troubleshooting why my ATOTO carplay unit works perfect when parked, then glitches the moment the car moves. Any pointers???

    • @Enfig
      @Enfig 7 месяцев назад

      If its not VSS wire related its probably a bad radio.

    • @benspeeder
      @benspeeder 6 месяцев назад

      @@Enfig Turned out I needed to change the reverse wire to the correct one. All perfect!

    • @Enfig
      @Enfig 6 месяцев назад

      @@benspeeder Sounds about right it was connected to the VSS wire. Glad you figured it out.

  • @patijua
    @patijua 4 месяца назад

    hi, friend,
    Were you able to keep the steering wheel controls for the new radio?
    What are the cables? I can't save the steering wheel buttons to control the new pioneer radio.

    • @Enfig
      @Enfig 3 месяца назад

      Yeah we do that all the time. Here is a link to all the parts. shop.enfigcarstereo.com/porsche-radio-upgrade-911-boxster-cayman997-987-2005-2008/

  • @alexrios5681
    @alexrios5681 Год назад

    What kind of electrical tape do you use? Looks like clothe tape.

    • @Enfig
      @Enfig Год назад +1

      It's Tessa tape. amzn.to/40nTuXo

  • @ravindrandev
    @ravindrandev 2 года назад +1

    Hi i need the tools to remove the fascia.is it possible to ship to india

    • @Enfig
      @Enfig 2 года назад

      Yes you can order them here. shop.enfigcarstereo.com/scion-xb-2008-2015-radio-installation-products/

  • @Ivan_Soloshenko
    @Ivan_Soloshenko 2 года назад

    Hello there. Is there any chance to fit a nice Sony Audio display into the BMW Z4 (E85 2006 year, without built-in display) - like in your wids? Going to buy that car, should shurely replace stock radio-dvd player with some awesome sony sound system, as the stock one has no screen, no BT, no GPS, no other good features. (almost every owner drills a hole on the top, over the conditioning system to install some ugly display, and i would definately like to get something nice-looking instead

    • @Enfig
      @Enfig 2 года назад +1

      You just have to do a floating screen or some custom work. Contact me once you get the car.

    • @Ivan_Soloshenko
      @Ivan_Soloshenko 2 года назад

      @@Enfig better custom, floating looks real bad. I hope ill buy it. Im from Ukraine - currently everything is not that stable to be shure that ill buy it. Hope to contact you soon

    • @Enfig
      @Enfig 2 года назад

      I can help with wiring but not with the custom mount.

  • @patijua
    @patijua Месяц назад

    Hello my friend,
    Do you know what to do so that the radio only turns on when the car is started?
    I replaced it, but it turns on just by turning the key on and I think that will drain the battery faster. Please can you help me with your opinion.

    • @Enfig
      @Enfig 17 дней назад

      Most german cars do that. They have the ability to turn on the radio without turning on the car so the battery isn't being spent on the car. Usually they turn themselves off after an hour.

  • @patijua
    @patijua 2 года назад

    Hello my friend,
    What is the color of the cable of the car, to connect to the lighting of the new radio (orange color of my new radio).
    Your help please, I just need to find this one.

    • @Enfig
      @Enfig 2 года назад

      I'm sorry I do not understand your question.

    • @patijua
      @patijua 2 года назад

      @@Enfig Hello my friend, I am asking about the color of the cable to connect the lighting cable that comes with the new radio, which is used to dim the light when I turn on the high beams or it is at night. today I have not been able to find it so the radio is always in daylight and does not lower the intensity. what will be the color of that wire on the car to connect to the new radio.

    • @Enfig
      @Enfig 2 года назад

      @@patijua Ohhhh the dimmer wire. It is handled by Can Bus. Our adapter reads the data wire and translates it into something the new radio can read.