“I can always go get another dead end job”, that says it all. “Why aren’t you doing this full time?” “Because im scared” love the honesty! “If i dont care about this product, It’s not going anywhere”. “There is a whole world of demons and insecurities buried down below you didnt know you had” Brene Brown would be proud of you! Thanks for sharing the conversation, i watched end to end. Larry
20: GREAT question especially if your family member or even significant other/partner is not supportive or is narcissistic and doesn't want you to succeed. It definitely makes believing in yourself a LOT more difficult when those close to you don't believe in you.
First time seen your channel, from someone who has done it just take the leap mate you'll be fine, SO much better running yourself and you can always go back to working a 9 to 5 later as you say.
Awesome format, just like I had a beer with you, guys! Love your tips. As an ex-marketing and present seller, don't over think marketing. You don't need a fancy degree for that. Most of the fundamentals are in "marketing management" book by Philip Kotler. And marketing and sales, is one of these "swallow the frog" tasks
Thank you both very much for taking the time to make this. This gave me a lot of insight being a family man as well and having that same intrusive thoughts of can I do this and provide for my family? You guys really nailed some of scary side of starting and trying to get a small business going. Again thank you for taking the time to do this great REAL information -CurtisCreations402
super informative video and id wasn't boring or making me fall asleep at all. Even made me giggle at a few points for some of the relatable parts. would love to see more of these!
Great interview, had a lot of good points throughout the whole interview. Im at the point that your mentioned, i am hung up on my logo so bad at the moment.
Great info thank you , i do it for 10 years and did on and off buiz with it in small scale , now retired like to do more again . Great inpiration from your interview . I look forward to your next videos. 🙏🙏😊
So good content. I'm a freelance developer, 40y, just bought a bambu P1P for fun/business. Business aspect is definetly there, this printer is good and I know cad and consulting.
I sub to your both but just found this. OMG, you guys touched on everything I have been thinking about and going through. You guys should do this a couple times a year!!
So, Im a mental health professional and I think its quite obvious that your are struggling with your mental health. This video gives off the impression that your life is influenced by your fears and undesirable emotions. I dont know how it turned out since this is a whole year ago but damn, you need a psychotherapy like yesterday.
i just starting on Etsy but they ban me twice in just couple of months with no reason at all. at first they accept their mistake on banning me, then in just a month they ban me again! They didn't even bother to mail me what causing the ban. should i make a woocommerce shop or shopify? shopify is expensive :(
44:48 marketing is important but dont get sucked into fake marketing schools that bind you to a contract or make you pay a fortune to attend events and seminars. Guy in his basement teaching what he learnt in the real world is fine; will take that over the self-hyped money grabbing schemes any day
I hope you guys do some more of these talks and post them. Very insightful stuff that is inspiring and beneficial!
“I can always go get another dead end job”, that says it all. “Why aren’t you doing this full time?” “Because im scared” love the honesty! “If i dont care about this product, It’s not going anywhere”. “There is a whole world of demons and insecurities buried down below you didnt know you had” Brene Brown would be proud of you! Thanks for sharing the conversation, i watched end to end. Larry
Fire content. Really liking these 3D printing business podcasts.
I watched the whole thing start to finish. Super informative and inspiring. Hope to hear more talks like this with other entrepreneurs in the future!
Finally, two dudes not selling snake oil. Just straight and solid business talk. Thanks.
Which marketing firm do you go with?
The one with the best marketing, that made you notice them, of course.
20: GREAT question especially if your family member or even significant other/partner is not supportive or is narcissistic and doesn't want you to succeed. It definitely makes believing in yourself a LOT more difficult when those close to you don't believe in you.
"I can make that"
the gift and curse of a maker
First time seen your channel, from someone who has done it just take the leap mate you'll be fine, SO much better running yourself and you can always go back to working a 9 to 5 later as you say.
Awesome format, just like I had a beer with you, guys! Love your tips. As an ex-marketing and present seller, don't over think marketing. You don't need a fancy degree for that. Most of the fundamentals are in "marketing management" book by Philip Kotler. And marketing and sales, is one of these "swallow the frog" tasks
Thank you both very much for taking the time to make this. This gave me a lot of insight being a family man as well and having that same intrusive thoughts of can I do this and provide for my family? You guys really nailed some of scary side of starting and trying to get a small business going. Again thank you for taking the time to do this great REAL information
-CurtisCreations402
super informative video and id wasn't boring or making me fall asleep at all. Even made me giggle at a few points for some of the relatable parts. would love to see more of these!
hey guys, great stuff, trying to get started printing myself. any tips and tricks are always helpful
Great interview, had a lot of good points throughout the whole interview. Im at the point that your mentioned, i am hung up on my logo so bad at the moment.
Great info thank you , i do it for 10 years and did on and off buiz with it in small scale , now retired like to do more again .
Great inpiration from your interview .
I look forward to your next videos.
🙏🙏😊
So good content. I'm a freelance developer, 40y, just bought a bambu P1P for fun/business. Business aspect is definetly there, this printer is good and I know cad and consulting.
Honestly, thank you for the HONEST video! Thumbs up from me!!
We have this kind of business and it’s DEFINITELY not an overnight thing
Great content. Thanks for being humble enough to bring in another top source of info both invaluable keep up the good work
Good video! Taking the full time plunge, I would imagine would be a scary one.
He’s officially plunging this Friday!!
@@MartinsonManufacturing how did it go it's been 6 months?
Have you had any issues with copyright? I see lots of Star Wars stuff. I know that Disney really monitors this diligently.
I sub to your both but just found this. OMG, you guys touched on everything I have been thinking about and going through. You guys should do this a couple times a year!!
That’s awesome to hear. Thanks for the encouragement!
I'm in the boat where I know my inventions can sell...but... do I want to be a manufacturer or an inventor?
Really appreciate you sharing this conversation!
So, Im a mental health professional and I think its quite obvious that your are struggling with your mental health. This video gives off the impression that your life is influenced by your fears and undesirable emotions. I dont know how it turned out since this is a whole year ago but damn, you need a psychotherapy like yesterday.
Great trailer bro and intro!!
Really cool- thx a lot and all the best for you guys!👍😃 Ed
Thanks Ed. You too man!
I’m starting a print farm using Bambu lab printers. X1C and P1S. In your experience, what’s your 3 top part failures. Thanks for the great content.
Great stuff guys!
Great video! Enjoyed every minute of it!
I am designing a lamp that rotates with built in LEDs but dont know where to advertise it :(
Great podcast guys!
Super interesting interview!
Thanks, learned a lot!
You guys go to the same Supercuts?
It's actually SportClips, but yes.
What is the best software to produce those items. Blender or Fusion360 or..? What are your toughs.
What is a good software to make an STL file??
Hey Martinson Manufacturing, what is that catchy intro music that you play in your videos? Where can I find it? Thanks!
Great question! I’ve been trying to find it myself. I paid someone to make that intro for me and then they disappeared.
i just starting on Etsy but they ban me twice in just couple of months with no reason at all. at first they accept their mistake on banning me, then in just a month they ban me again! They didn't even bother to mail me what causing the ban. should i make a woocommerce shop or shopify? shopify is expensive :(
Hello Sir , how to start to sell your 3d printing service online as a student , what things shuold i pay attention to ?
Anthony has an uncanny resemblence to David Dobrik
44:48 marketing is important but dont get sucked into fake marketing schools that bind you to a contract or make you pay a fortune to attend events and seminars. Guy in his basement teaching what he learnt in the real world is fine; will take that over the self-hyped money grabbing schemes any day
100%
So this is how introverts talk
I like it but to many likes.