Really awesome display! When I was a boy living in Lubbock, TX my next door neighbor had a collection that was second to none. I had a large collection myself but his put me and my brother's to shame. Neither of owned the Flagg though, it remained out of reach through my childhood. Great job!
The Flagg so often fails as a nice display piece. It usually ends up looking like a big, ugly, plastic coffee table. Your tropical backdrop has done wonders for it, it imbues a real sense of fun; good on you, mate!
Hello and it's beautiful, I too have a USS Flag, waiting to custom make my flag. It will sit on studs but for the trusses the frame for the Flag, I'm going to cover them with a painted card board and have flat panel monitors on the trusses with glued maps and scenery like. "Thanx for sharing"
@@darthg6505 hello and read off some comments here and I didn't realized I had ready commented about a year ago smh hmm... waiting to custom make my flag sure is taking eternity here lol
The prints were found on Retro Blasters page on you tube. I paused the video, did a screen grab, & printed out what he had. Then I used Meat paper & drew out the template the size I needed. Purchased the wood & paint. Then measured, cut , painted & then started building.
Nice dio I've seen how they added a lower deck also for their vehicles but I've never seen adding the gi joe head quarters that is a good idea also. For my uss flag I'll do the same but I am now seeing how I want to make flat screen panels as monitors to add to the frame of the carrier that sits on top of them studs like to cover some areas of the frame might enhance it Abit my uss flag only cost me 160.00 bucks here in philadelphia found it at a thrift store in Kensington philly and boy was I happy lol
@@darthg6505 I'm all about it! But I'd secretly also like to see an actual 'all new' vehicle in the GIJOE 3.75in line put out by Haslab...like maybe a badass Naval Destroyer🤘Mind blown if that would happen. I'm a former Army Paratrooper, and a C-130 would do the trick too!
Yes a C-130 would be killer & it would be huge. Plenty of room for the Vamps & Mobats & lots of troops! A naval destroyer yes! My father was in the Navy in WW2 in Korea & Nagasaki. My brother is retired Navy, he served before & during Dessert Storm.
If It's not complete, A good price only missing 3 or 4 parts shouldn't cost you more than $1,500.00. I was only missing small parts & was able to construct the parts I needed to make it stable & functional. I did order a few parts from ebay. I will be getting new stickers for it after the new year. Thanks for watching!
i like how you added the hq....i have a three level flagg 0n my channel if you want to check it out, def got some inspiration to add to mine cheers!!!!
Really awesome display! When I was a boy living in Lubbock, TX my next door neighbor had a collection that was second to none. I had a large collection myself but his put me and my brother's to shame. Neither of owned the Flagg though, it remained out of reach through my childhood. Great job!
One of the best Flagg displays I’ve seen! Loved the water and background
Thanks, it was fun to build!
I'm happy to share my passion of collecting & entertainment with the fans of Gi-Joe & other collectibles. Thanks for watching! Yo Joe!!!
I absolutely love what you did with the water . I’m shocked I didn’t think of that .
Very awesome display thanks for sharing .
The Flagg so often fails as a nice display piece. It usually ends up looking like a big, ugly, plastic coffee table. Your tropical backdrop has done wonders for it, it imbues a real sense of fun; good on you, mate!
Thank you! I had much fun working on it & have many more plans for it in the future. Thanks 4 watching. Yo! Joe!
That is a very organize display. I like that the Flagg can hold more vehicles and figures than a book shelf, yet is takes the about the same space.
Yes I agree. The Flagg works great 2 display in mant ways! Thanks 4 watching! Yo! Joe!!!
The fish under the cellophane is a great effect.
Thank you! I also used the red for a tinted window effect on my Jabbas Throne room diorama, which I will be posting soon.
I almost want to take apart my flagg to put that in just like he has it
Nice job! Thanks for the tour ! I
Yes, Thank you, I do like your poured resin Idea. Maybe for a future project. Thanks 4 watching! Yo! Joe!!!
Great job dude! I hope to find myself restoring one of these after Joe Fest 2022! Looking forward to more vids. Yo Joe!
Thanks! More videos coming. I hope you score at Joe Fest! Cobra! La!!!
absolutely beautiful my man!!!!!
Thank you! Yo Joe!!!
Ah yes beautiful. One day! I see my 1998 rattler up on deck.
Nice! Water effect is a nice touch.
Thanks!
This is amazing!
I wonder if you could use a 3d printer to make more custom GI Joe and Cobra bases?
Yes, I've been looking at 3D printers. And thinking the same thing. Thanks for watching! Yo! Joe!!!
Now that's an epic set up! Awesome!
Thanks, It was fun building it. thank you for watching.
Looks great 👍
Thank You! Yo Joe!!!
Hey, man! That set-up looks cool! Thanks for sharing it!
Thanks for watching! More good stuff coming!
Hello and it's beautiful, I too have a USS Flag, waiting to custom make my flag. It will sit on studs but for the trusses the frame for the Flag, I'm going to cover them with a painted card board and have flat panel monitors on the trusses with glued maps and scenery like. "Thanx for sharing"
Thanks for watching! Yo Joe!
@@darthg6505 hello and read off some comments here and I didn't realized I had ready commented about a year ago smh hmm... waiting to custom make my flag sure is taking eternity here lol
@@williamgonzalez5257 I would love to see the work you do on your Flagg, It took a lot of research for me. Cheers!
Looks pretty awesome! My only tiny nitpick is to tell ya to take an iron to that backdrop.
I agree! Thanks for watching!
Awesome work for a squid!
YO JOE!💥😮👏🏾👏🏾👏🏾😎👍🏾
Thank you for watching!
You did a great job...
Thank you! & Thanks for watching!
What kind of lights did you use inside the superstructure?
I used Patriot lighting LED Flexible tape light from Menards, Thanks for watching!
Fkn awesome set up
Thank You! I had a lot of fun with the project. Looking to add to it this spring. Thanks 4 watching. Yo! Joe!
Very cool setup, well done!
Thanks Kiwi. It was a lot of fun to set up, more coming for the Flagg this coming spring!
How did you build the lower deck? Also where can I find the blue prints?
The prints were found on Retro Blasters page on you tube. I paused the video, did a screen grab, & printed out what he had. Then I used Meat paper & drew out the template the size I needed. Purchased the wood & paint. Then measured, cut , painted & then started building.
I'm hoping Hasbro lab brings this baby back.
Me too, I would buy that.
Nice dio I've seen how they added a lower deck also for their vehicles but I've never seen adding the gi joe head quarters that is a good idea also. For my uss flag I'll do the same but I am now seeing how I want to make flat screen panels as monitors to add to the frame of the carrier that sits on top of them studs like to cover some areas of the frame might enhance it Abit my uss flag only cost me 160.00 bucks here in philadelphia found it at a thrift store in Kensington philly and boy was I happy lol
WoW! What a deal, I like your monitor idea. I have future plans for mine, includes the Haslab Skystriker. Thanks for watching, Cheers!
beutiful coletion bro
Thank you! & thanks for watching!
Its beautiful🤩
Thank you! And thanks 4 watching!
Where did you get the rattler
Lookin good! Welcome to the club bro!
Thanks Man! Now all we need is the Haslab Skystriker.
@@darthg6505 I'm all about it! But I'd secretly also like to see an actual 'all new' vehicle in the GIJOE 3.75in line put out by Haslab...like maybe a badass Naval Destroyer🤘Mind blown if that would happen. I'm a former Army Paratrooper, and a C-130 would do the trick too!
Yes a C-130 would be killer & it would be huge. Plenty of room for the Vamps & Mobats & lots of troops! A naval destroyer yes! My father was in the Navy in WW2 in Korea & Nagasaki. My brother is retired Navy, he served before & during Dessert Storm.
Haha it looks like in Hawaii near Pearl Harbor; and remember it’s not “Aloha” but “Yo Joe”.
Thank's for watching! "Yo Joe".
Nice set up whts a good price too pay for the uss flagg
If It's not complete, A good price only missing 3 or 4 parts shouldn't cost you more than $1,500.00. I was only missing small parts & was able to construct the parts I needed to make it stable & functional. I did order a few parts from ebay. I will be getting new stickers for it after the new year. Thanks for watching!
@@darthg6505 thanks for the info I just started collecting in Dec 2020
@@drmindbindercreations2996gijoe no problem. If I can find 1 for a good price I will let you know whos got it.
I paid 625$ for mine a month ago but I see them for 900-2000$ most of the time
@@GeneralSantucci1st What a deal! I hope you got it complete or mostly complete!
Nice job
Thanks Man!
Pretty awesome! Just get rid of all the non-vintage figures and I will give it a 10/10!!!
nice!
Thank you for watching & subscribing!
💚
1 day I'll find a boxed flagg complete too buy. I have a Shipwreck for sale if you want it.
I hope you do. I rarely see them sealed & when I do they go upwards into the thousands of dollars. Good luck!
@@darthg6505 price isn't an issue. Just need to find a good sealed one.
@@KirksCORNER1983 I'll keep an eye out 4 a sealed one & let you know. I've seen two sealed ones in the past 4 years. Thanks for watching!
i like how you added the hq....i have a three level flagg 0n my channel if you want to check it out, def got some inspiration to add to mine cheers!!!!
Thanks for watching my channel! I will be watching yours, glad I could be of some inspiration! Yo! Joe!!!
I’m a hoarder hi 👋🏾