Hi Sam, Absolutely loved your card WOW I thought it looked just Amazing thanks for sharing very much appreciated 👍 Sam can you do a demo if possible showing how to make this lovely card without the die set thanks Lin 👍❤️
Just used my kit for the first time today and I have 4 large dies in my set. Been a bit confused which ones to use! I did have my seton pre ordered. Not sure how to message you xxx
@Sam Calcott I just opened up my 6x6 Shutter card set to put them all on a magnet board. I have a question on the dies I received. Do you have an email that I can send my question and picture to? Thank you. I love your creative ideas and have been following you for a few years now.
Ok, having difficulty here. I cut the inner mat panel with the smaller die for it. It is not quite 5-1/2 by slightly over 5-1/2. If I leave only a small hole in the flag like mechanism, with the scored piece folded over pointing up, there is half an inch left to the mat layer panel. If I pull the score line to the edge, there is a half inch opening in the middle between the flags. I am afraid to glue it and I need to send to my great grandchild. Help! P.S. I had to jam the center together, no little hole and glue and it worked enough to see my sentiment. I am not going to stress over larger white portion showing. I did use the big square that you used, so no clue why the difference in the top piece with hole and the mat layer. At least it looks fine. Phew.
I have just started to use mine, but unfortunately one of the small square dies are missing, I guess it's to late to get it now? It's the 4th big one down
I’m sorry you’re upset. Are you able to cancel your order and order again when everything’s back in stock? Please drop me an email at contact@mixedupcraft.com
@@MixedUpCraft hi Sam I'm very upset as I am disabled and would like to get this collection with it been a bundle they couldn't send some of it out then wait for the rest so have cancelled the order but my husband was getting this for a anniversary present in august
Unfortunately if one of the single items sells out then the bundle offers can’t be fulfilled until that item comes back into stock. Once again I’m sorry this happened, and hope that your able to get the things you wanted when they are back in stock.
I received my 6x6 die cuts today from craft stash & I think I have got a faulty pack as the largest square is 6x6.5 :( I have cut it down to size myself but I just can’t get the shutter mechanism right, the gap when it’s open seems too small. I don’t know where I’m going wrong.
Hi Hayley, I’m not sure if you follow my FB page but I put up an announcement about this 5 weeks ago, explaining that they had made the main squares the wrong size. We had replacements made and these were supposed to have all been swapped over before sending out to the customer. You should have received another 2 squares in a separate bag? If this is not the case please contact Craft Stash and they will send them out to you. Apologies for the inconvenience caused. Sam 😊
@@MixedUpCraft thank you Sam for replying. I did receive 2 in a separate bag & wondered why they were separate, that answers that question. Although I’ve gone & put them all in one bag now, is there any way you can tell me the sizes of the ones to keep & the ones to ditch? :)
I’m glad their there, I was getting worried for a minute. Get rid of the biggest one and the one that layers into that. The one you need is the same hight as the gate pieces and just under 15cm if I remember correctly.
Another great tutorial and very cute card ❤️
What a great colorful card. Love the shutter mechanism. Can’t wait to get my set.
Thanks so much!
These cards are fabulous Sam 😍
Great card design. Love it x
Love all you dies stamps and your work amazing
Fabulous design Sam, have to order the kit !! 🌍🇬🇧🇬🇧🇬🇧🌍
Awesome, thank you!
Thank you for the tutorial, and I’m looking forward to using my 6x6 shutter dies later. Fantastic job Sam x
Beautifully made 😀
Thanks a lot 😊
Thank you so much! I love the card.
Lovely card very clever design thanks again Sam for an amazing tutorial xx
Great dies and cards Sam, thankyou for sharing.
I am in the middle of colouring my sweets and treats then I will make a few cards with them. Love these cards Sam! So much fun. Thank you for sharing
Have fun!
Another great tutorial. Very SWEET card❤️
Lovely and you make it look so easy.
Super sweet cards 🥰 I love your lollipops, the pattern papers and your card designs ❤ thanks for sharing your creativity Hugs xx
Another lovely card
Thanks Sam, I remember the 5 x 7 which I made up, will have a go at this one as I have my great child's birthday in June, fingers crossed . xx
Thank you for sharing Sam, I’ve ordered my die set so looking forward to making shutter cards soon.
Really like the sliding shutter card. I have made a few of these the old way as I haven’t got the dies. Love the sweet collection. Great card Sam xx
Lindo Sam!!!! 💖💖💖
Amazing as always! Love it!
Hi Sam, Absolutely loved your card WOW I thought it looked just Amazing thanks for sharing very much appreciated 👍 Sam can you do a demo if possible showing how to make this lovely card without the die set thanks Lin 👍❤️
Thanks Linda, I already do, check my Shutter card playlist as I mention in the video 😊
@@MixedUpCraft
Hi Sam, sorry I must have missed u saying check out your playlist I will most definitely do that Once again sorry Sam, 💝👍
Love to watch Sams tutorials. X
I need to check mine then. I haven't used it yet and I ordered it the night before release, so need to see if there is an issue.
Yes please do Teresa, I put on post on Fb page the week before release explaining everything.
Hello Sam
Just used my kit for the first time today and I have 4 large dies in my set. Been a bit confused which ones to use! I did have my seton pre ordered. Not sure how to message you xxx
@Sam Calcott I just opened up my 6x6 Shutter card set to put them all on a magnet board. I have a question on the dies I received. Do you have an email that I can send my question and picture to? Thank you. I love your creative ideas and have been following you for a few years now.
Ok, having difficulty here. I cut the inner mat panel with the smaller die for it. It is not quite 5-1/2 by slightly over 5-1/2. If I leave only a small hole in the flag like mechanism, with the scored piece folded over pointing up, there is half an inch left to the mat layer panel. If I pull the score line to the edge, there is a half inch opening in the middle between the flags. I am afraid to glue it and I need to send to my great grandchild. Help!
P.S. I had to jam the center together, no little hole and glue and it worked enough to see my sentiment. I am not going to stress over larger white portion showing. I did use the big square that you used, so no clue why the difference in the top piece with hole and the mat layer. At least it looks fine. Phew.
Great cards ,I have bought the shutter card pack and embossing folder and sweet dies , but unable to get the sweet stamps or paper 😔
Hi Pauline, It's been ordered, just takes time for things to come back in 😊
@@MixedUpCraft oh has it , thank you for letting me know xxxxx
Lovely bright card Sam! Thank You, I've just received my 6" x 6", do you know if you will be having the sweet dies & stamps in again? X
Hi Margaret, yes they have been ordered. 😊
I have just started to use mine, but unfortunately one of the small square dies are missing, I guess it's to late to get it now? It's the 4th big one down
Hello Jules. please e mail me at contact@mixedupcraft.com and hopefully I can help you with this issue . 😊
Where do I buy this set from please, in the UK?
Hi Leeann, links to the product I use in my videos is always shared in the description box below the tutorial.
Lovely card but was very upset when I ordered the full set to be told that I would not be getting it till September
I’m sorry you’re upset. Are you able to cancel your order and order again when everything’s back in stock?
Please drop me an email at contact@mixedupcraft.com
@@MixedUpCraft hi Sam I'm very upset as I am disabled and would like to get this collection with it been a bundle they couldn't send some of it out then wait for the rest so have cancelled the order but my husband was getting this for a anniversary present in august
Unfortunately if one of the single items sells out then the bundle offers can’t be fulfilled until that item comes back into stock. Once again I’m sorry this happened, and hope that your able to get the things you wanted when they are back in stock.
I received my 6x6 die cuts today from craft stash & I think I have got a faulty pack as the largest square is 6x6.5 :(
I have cut it down to size myself but I just can’t get the shutter mechanism right, the gap when it’s open seems too small. I don’t know where I’m going wrong.
Hi Hayley, I’m not sure if you follow my FB page but I put up an announcement about this 5 weeks ago, explaining that they had made the main squares the wrong size. We had replacements made and these were supposed to have all been swapped over before sending out to the customer. You should have received another 2 squares in a separate bag? If this is not the case please contact Craft Stash and they will send them out to you. Apologies for the inconvenience caused. Sam 😊
@@MixedUpCraft thank you Sam for replying. I did receive 2 in a separate bag & wondered why they were separate, that answers that question. Although I’ve gone & put them all in one bag now, is there any way you can tell me the sizes of the ones to keep & the ones to ditch? :)
I’m glad their there, I was getting worried for a minute. Get rid of the biggest one and the one that layers into that. The one you need is the same hight as the gate pieces and just under 15cm if I remember correctly.
@@MixedUpCraft all sorted. Thank you. I love this collection x
at least if you give the sizes of the die cut pieces one can work out without the dies ?!!
show us without the dies and ready die cuts !! everybody doesn't have them !!