I noticed alot of people damaged the digitizer because of miss the glass and taking part of the screen with it!….. anyway to show exactly how to use the metal floss and carefully removing the glass? Without damaging the digitizer? Tnx
Hi Jerry, We did our first 15 pro max screen last week and are experiencing glue deformation after a few days around the dynamic island area. How do you prevent this?
Hi Jerry, ive just started screen refurbishing. Everithing goes well, except the separation. The wire ripping constantly, any advice? Ive tried 0.03, 0.035, 0.04 wires.Thanks!
1) what glue did you use on the edges of the OLED before putting the glass on top? 2) Is it mandatory to replace OLED frame as well? I am getting mixed answers, need your opinion.
Could you explain how to separate the glass with a heat gun or hair dryer? It is for a home repair of an s21 ultra, how could I measure the temperature and insert the thread so as not to damage the display
Daje 😁 Nie zawsze szyby z oca są prawidłowo przechowywane (powinny być w chłodnym i ciemnym miejscu) a jeśli nie są to po kilku dniach wychodzą bąble. UV daje pewność że bąble nie powrócą 😊
@@JerryMobilePL ja tak szczerze nie zauwazylem zadnej roznicy. Jesli jest dobrze zalaminowane - dobrze spozycjonowane itp to nic nie wychodzi przynajmniej mi, czy uzywam uv czy nie. Na poczatku byla teoria ze uv niweluje fale, co tez jest kompletna bzdura, teraz dorabiaja teorie o niepowracajacych bąblach. Ja totalnie nie widze roznicy ale kazdy ma swoje doswiadczenia, szanuje.
i am fond of mobile repering if I want to learn how to work for iphone can you teach me how to work I am working already in pakistan am knowlge all android phones but not iphone.
Never use that metal razor , i did it and the lcd gone because thta metal razor didnt move on glass 100% and half of thta metal cuted little of frame and after use cutter wire , the LCD to cutted with that wire and lcd gone😢😢 Just use cutter wire for do it with out ant metal razer as i did befor and that works okey I just tried this video to find a new way but ...... lost that lcd
Water resistance is a myth. No manufacturer provides a warranty against water damage, and the tightness is max 1 year. It makes no difference whether he used a seal or not. When replacing the glass, it is not possible to seal it like the factory, because Apple does not sell glue between the glass and the frame, because officially the glass itself is not replaceable. Want tightness? Buy a 3x more expensive, factory glued to the glass and frame - OLED screen + seal and enjoy apparent waterproofness.
Newer iphones dont need it! It already has a thick rubber seal connected to the digitizer…. Before it was just aluminum… people added that extra water proof seal and the iphone stuck out the housing a bit….
@@lolek199316 Bullshit, the water resistance is not a myth, I use my phones underwater all the time since the 8 pro max, never had a problem using them in the pool for underwater filming,
![iPhone 14 Pro Screen Glass Replacement On The Frame [only Glass]](/img/1.gif)
I noticed alot of people damaged the digitizer because of miss the glass and taking part of the screen with it!….. anyway to show exactly how to use the metal floss and carefully removing the glass? Without damaging the digitizer? Tnx
Excellent work, may God bless you always 👍
What tool is it you are using to remove the rest of the glue????😮
Hi Jerry,
We did our first 15 pro max screen last week and are experiencing glue deformation after a few days around the dynamic island area.
How do you prevent this?
Hi! Did You used UV after autoclave?
Hi Jerry, ive just started screen refurbishing. Everithing goes well, except the separation. The wire ripping constantly, any advice? Ive tried 0.03, 0.035, 0.04 wires.Thanks!
Wire ripping is normal but you have to keep it tight while working
Elegancko! Ile stopni na podgrzewaczu?
90*C 😉
Good job man 🫡
Hello, what is the name of the liquid you pour on the screen you use? What kind of liquid do you use?
1) what glue did you use on the edges of the OLED before putting the glass on top?
2) Is it mandatory to replace OLED frame as well? I am getting mixed answers, need your opinion.
1 : T8000 clear glue.
2 : OLED frame replacement is mandatory only from iPhone X all the way to iPhone 11 pro Max.
hai jery..
how about problem green screen ?
Mam pytanko, jakiej nitki używasz?
If the polariser damages should we used Glass / OCA and poloraiser together part
Nie dajesz wklejki?
mantap x bah...😊 ajarin dong
Could you explain how to separate the glass with a heat gun or hair dryer? It is for a home repair of an s21 ultra, how could I measure the temperature and insert the thread so as not to damage the display
Impossible without the machines used in the video
Brawo Ty 👌
Great work! What temp do you use on the heat plate?
Thanks! 90 degrees of Celcius :)
@@JerryMobilePL Thank you! Is that the same for LCD’s? Say XR and 11
@@Coopzzz360yes, same temp.
Which liquid are you using?
This is how screens should be replaced!!
If the OLED itself and touch aren't broken, then yes!
Not really, could have been done better and he even didnt replace the old adhessive
How much you charge for that?
А рамку кто приклеивать будет?
Excellent job
Myslisz serii ze uv cos daje? Bez hejtu po prostu pytanie.
Daje 😁
Nie zawsze szyby z oca są prawidłowo przechowywane (powinny być w chłodnym i ciemnym miejscu) a jeśli nie są to po kilku dniach wychodzą bąble. UV daje pewność że bąble nie powrócą 😊
@@JerryMobilePL ja tak szczerze nie zauwazylem zadnej roznicy. Jesli jest dobrze zalaminowane - dobrze spozycjonowane itp to nic nie wychodzi przynajmniej mi, czy uzywam uv czy nie. Na poczatku byla teoria ze uv niweluje fale, co tez jest kompletna bzdura, teraz dorabiaja teorie o niepowracajacych bąblach. Ja totalnie nie widze roznicy ale kazdy ma swoje doswiadczenia, szanuje.
i am fond of mobile repering if I want to learn how to work for iphone can you teach me how to work I am working already in pakistan am knowlge all android phones but not iphone.
Never use that metal razor , i did it and the lcd gone because thta metal razor didnt move on glass 100% and half of thta metal cuted little of frame and after use cutter wire , the LCD to cutted with that wire and lcd gone😢😢
Just use cutter wire for do it with out ant metal razer as i did befor and that works okey
I just tried this video to find a new way but ...... lost that lcd
Szybko rozjebali 😂jaki stopień trudności 1-10?
Hmm.. 😄 nic nie jest trudne jeśli się to potrafi haha
Ten mocniej w ramie siedzi niż poprzednie modele, cały proces podobny
Using a metal tool for phone LCD is most risky , every repair expert would agree
how much does this service cost
@@ahmetyas3402 1100 PLN 😉
What in the world is that adhesive remover 👀
HOW THE FUCK DID HE JUST BREAK THAT PHONE, IT S BEEN ONLY 4 MONTHS SI CE IT WAS RELEASED
This is the life 😄😄
👍👍👍👍
U didn’t put the waterproof seal after taking it out now it will come back next as water damage
Water resistance is a myth. No manufacturer provides a warranty against water damage, and the tightness is max 1 year. It makes no difference whether he used a seal or not. When replacing the glass, it is not possible to seal it like the factory, because Apple does not sell glue between the glass and the frame, because officially the glass itself is not replaceable. Want tightness? Buy a 3x more expensive, factory glued to the glass and frame - OLED screen + seal and enjoy apparent waterproofness.
Newer iphones dont need it! It already has a thick rubber seal connected to the digitizer…. Before it was just aluminum… people added that extra water proof seal and the iphone stuck out the housing a bit….
@@lolek199316 Bullshit, the water resistance is not a myth, I use my phones underwater all the time since the 8 pro max, never had a problem using them in the pool for underwater filming,