Great video once again. It looks like it fly's very nice while going slow, which is very important. If it's climbing during acceleration, it's an EZ fix. I think I heard you say that you have a Spectrum Transmitter. Go to the MIX option, and create a Throttle / Elevator Mix. In your case, it looks like you'll have to add some down elevator to the Throttle Mix. Go a little at a time, until you get it exactly where you like it. I've had to add that Mix to several factory built airplanes. Afterwards it'll fly perfect.
Thank you! And unfortunately yes, it was kind of hard to control at first. Definitely wouldn’t be doing any more custom maidens with people at the park.
Even though it was super twitchy, you still got a good maiden flight; If you had built a Vanessa CG Rig like I told you about years ago, you could have saved a lot of time, effort and could have prevented some frustration at the field trying to get your CG just right. 🤔 Also, as big as the plane IS... I'm pretty sure your power plant size is too small ( motor, esc, & prop ), it's just barely enough thrust to keep the model in the air OR you were treating the plane as a slow Bush-Wacker and NOT a Jet!! Some Dihedral on the main wings could have helped to naturally correct it's roll control with no input from the operator preventing side-slip.🤣 Here's a video to help illustrate and explain it better... ruclips.net/video/I8iLR2xRNKY/видео.html Planes with straight wing profiles excel at generating TONS of Lift, but are generally slow in speed. Planes with swept-back wings SUCK at slow flight but perform best at higher speeds! Come on man, you know this!!😉 PS... I'm getting the insta360 Go 3 action camera tomorrow so I'll be able to demonstrate how the CG Rig works with one of my own Flying Wings!! PPS... Happy Birfday BRO!!1!
Your absolutely right a Vanessa cg rig is needed, I’ll will be building one this week or next as well as uploading a how to build video on it. Also I was thinking the same about the power set up BUT that was only on 3s so there’s still a lot of room for power and improvement. And thank you bro !!! 😎
Nice job bro!
Thank, the next one should be much better!
Great build my man!! You’ve inspired me to get building!
Thank you ! I’ve been busy with my bday and the kids birthday last week but this week we’re back to work !
Great video once again. It looks like it fly's very nice while going slow, which is very important. If it's climbing during acceleration, it's an EZ fix. I think I heard you say that you have a Spectrum Transmitter. Go to the MIX option, and create a Throttle / Elevator Mix. In your case, it looks like you'll have to add some down elevator to the Throttle Mix. Go a little at a time, until you get it exactly where you like it. I've had to add that Mix to several factory built airplanes. Afterwards it'll fly perfect.
Thank you so much ! This is a great tip, I definitely have a couple planes that need this esports a-10. I appreciate you!
On the plus side... you're a very creative builder. On the negative side... it appeared, at times, you were flying over the ball players.
Thank you! And unfortunately yes, it was kind of hard to control at first. Definitely wouldn’t be doing any more custom maidens with people at the park.
Beautiful day, beautiful job.
Thank you very much!
nice one!
Thanks!
Even though it was super twitchy, you still got a good maiden flight; If you had built a Vanessa CG Rig like I told you about years ago, you could have saved a lot of time, effort and could have prevented some frustration at the field trying to get your CG just right. 🤔
Also, as big as the plane IS... I'm pretty sure your power plant size is too small ( motor, esc, & prop ), it's just barely enough thrust to keep the model in the air OR you were treating the plane as a slow Bush-Wacker and NOT a Jet!! Some Dihedral on the main wings could have helped to naturally correct it's roll control with no input from the operator preventing side-slip.🤣
Here's a video to help illustrate and explain it better... ruclips.net/video/I8iLR2xRNKY/видео.html
Planes with straight wing profiles excel at generating TONS of Lift, but are generally slow in speed. Planes with swept-back wings SUCK at slow flight but perform best at higher speeds! Come on man, you know this!!😉
PS... I'm getting the insta360 Go 3 action camera tomorrow so I'll be able to demonstrate how the CG Rig works with one of my own Flying Wings!!
PPS... Happy Birfday BRO!!1!
Your absolutely right a Vanessa cg rig is needed, I’ll will be building one this week or next as well as uploading a how to build video on it. Also I was thinking the same about the power set up BUT that was only on 3s so there’s still a lot of room for power and improvement. And thank you bro !!! 😎