Wowsers that is definitely awesome. Congratulations on your new tool / toy my friend. Hopefully you get great use out of it for many years to come my friend. Keep up the great craftsmanship and hard work my friend. Keep Making. God bless.
@@DrWhoWho1 I don’t think you would have burnmarks if fine tune the engraving power. My settings were a bit to strong but i sanded off the burnmarks and it looked really good. Another tip i got is to put on masking tape to avoid the burn marks.
@@Ollaris megközelítem máshogy, mert úgy látom nem érted. Befújás szükséges a tiszta szép és korom/égésnyom nélküli vágáshoz. Hűtés pedig egy 50W-os lézer ( ami amúgy nem tud annyit de ebbe ne menjünk bele :) ) elengedhetetlen a melegedés miatt. Szóval továbbra is áll a kérdésem. 1,5M a gép, de kornátsem ér annyit. Ennyi pénzből egy jóval nagyobb felületű és teljesítményű gép is kijött volna. Pár év lézerezés után biztos én vagyok dezinformált :) Nagy future a kamerakép, de a büdös életbe nem volt szükségem rá. A lézer sokáig nem fogja bírni arra készülj fel. Súlyos tízezer a cseréje, ellenben az üzemidő messze alulmarad akár egy sima K40 gép csövéhez képest, ami használat és ész függően 1000-1500 óra. Tehát bocs, de röhögök én a végén !
Elösször is, én kérek elnézést de azt hittem a mostani videómhoz irtad a kommentet és poénnak szántad. Másodszor pedig azon nevetek amin akarok. Na és hogy kérdésedre válaszoljak a befújást egy belső kompresszor szolgáltatja, a lézer hűtését vizzel oldották meg ami szintén be van építve. Értem én hogy nagy lézeres vagy de azért kicsit olvass utána a dolgoknak mielött ocsárolsz valamit amit nem volt alkalmad kipróbálni. Én nem értek hozzá. Nem is állítom hogy ez a gép jó vagy rossz. Egyszerűen bemutatom, elmondom amit tapasztaltam.
Thanks. It’s aluminum. But i think most of them are. I seen somewhere a some hooks that can be pushed into the honeycomb to hold down thin materials, that could be cut out of wood with a laser
I don´t want to believe that this machine can carve with 600mm/s. That´s 36000 mm/min! But a nice machine, have Fun with it. The burn marks tell me that there is not enough air for cooling and blowing the smoke away...
Really love the review! Best one I’ve seen. I don’t know how to use light burn… is there project library large? Is there a charge to access the projects? Thanks!
Thanks! The library is quite large and they add to it frequently. You don’t have to pay for it. You can check it out before you purchase the machine free of charge.
@@CocoBorderCollie why compare with glowforge? it looks more like the gweike is a cheap clone of the Makeblock / xTool Laserbox Rotary, even their packaging looks almost identical. you could get a Makeblock / xTool Laserbox Rotary for $4k or $3k refurbished
Fantastic machine indeed, Sebastian! 😃
Congrats for the new toy!
Stay safe there with your family! 🖖😊
Thank you! Stay safe!
Brilliant review! And the voice over was really good, well done!
Thanks so much! I never did a voiceover before.
@@Ollaris Whoa, for your first time it rocked!
I really appreciate it!
Excellent, as always, thank you for sharing. Cheers.
Thanks for watching!
Great video and review. Can't wait to see what you do with your new tool. I'm sure it'll be fabulous and creative. Mahalo for sharing! : )
Thanks a lot Gary!
As always Seb Awesome Video , another new toy , you know this means another area in the shop for the laser 10/10 keep up the great work champ 🙏
Thanks a lot! Yes, i have to find a permanent spot for it.
Wowsers that is definitely awesome. Congratulations on your new tool / toy my friend. Hopefully you get great use out of it for many years to come my friend. Keep up the great craftsmanship and hard work my friend. Keep Making. God bless.
Thanks a lot Jared! I hope to get a lot of use from it.
Great to see the Australian Bundaberg bottle
Love your work 👍
Haha! Thanks so much!
Although Laser Engravers are not my cup of tea, that was a great review! 👍👍
Thanks! I tried my best!
Good my friend I'm happy to watching your videos thank you
Thanks a lot!
There is a trick where if you put down a layer to tape (painters tape works well) when you engrave you can avoid the burn marks.
Great idea! Thanks for the tip!
That works well for clear plexiglass and stuff like that. Even for stainless steel, if I'm not mistaken. 😊
thank you, helped me to get started with my gweike. maybe you can make more beginner tutorials for the gweike cloud.
Thanks, Happy to hear that!
Great video! Love the voice over. Especially the honesty, "I don't know what I am doing here" lol. How can I get them to send me a laser too =)?
Very insightful, thanks for sharing!
Thanks for watching!
Save the labels on the bass ply just lay them on your new ply for quick setup
Good idea!
Fantastic beautiful toy. Have fun with it 😁
Can you use the machine without restrictions if you don't create an account with the manufacturer?
Yes. That’s the good thing about the Lightburn support.
How loud is it ? How many db?
I checked it with an app on my phone, it’s about 60db 10cm above the machine.
@@Ollaris oh, i think that is still ok. Do you think the mashine is also suitable for engraving portraits etc ? I am worried about the burn marks ?
@@DrWhoWho1 I don’t think you would have burnmarks if fine tune the engraving power. My settings were a bit to strong but i sanded off the burnmarks and it looked really good. Another tip i got is to put on masking tape to avoid the burn marks.
@@Ollaris that's a great advice. Thanks. I also want to buy the Gweikee. I hope it will be fine with it.
@@DrWhoWho1 good luck with it, there’s a link in my description and the coupon code OLLARIS200 that saves you 200$ of your order.
Értem én , de levegő befújást illetve a hűtést mi adja ?
🤣😂🤣
@@Ollaris megközelítem máshogy, mert úgy látom nem érted. Befújás szükséges a tiszta szép és korom/égésnyom nélküli vágáshoz. Hűtés pedig egy 50W-os lézer ( ami amúgy nem tud annyit de ebbe ne menjünk bele :) ) elengedhetetlen a melegedés miatt. Szóval továbbra is áll a kérdésem. 1,5M a gép, de kornátsem ér annyit. Ennyi pénzből egy jóval nagyobb felületű és teljesítményű gép is kijött volna. Pár év lézerezés után biztos én vagyok dezinformált :) Nagy future a kamerakép, de a büdös életbe nem volt szükségem rá. A lézer sokáig nem fogja bírni arra készülj fel. Súlyos tízezer a cseréje, ellenben az üzemidő messze alulmarad akár egy sima K40 gép csövéhez képest, ami használat és ész függően 1000-1500 óra. Tehát bocs, de röhögök én a végén !
Elösször is, én kérek elnézést de azt hittem a mostani videómhoz irtad a kommentet és poénnak szántad. Másodszor pedig azon nevetek amin akarok. Na és hogy kérdésedre válaszoljak a befújást egy belső kompresszor szolgáltatja, a lézer hűtését vizzel oldották meg ami szintén be van építve. Értem én hogy nagy lézeres vagy de azért kicsit olvass utána a dolgoknak mielött ocsárolsz valamit amit nem volt alkalmad kipróbálni. Én nem értek hozzá. Nem is állítom hogy ez a gép jó vagy rossz. Egyszerűen bemutatom, elmondom amit tapasztaltam.
I really enjoyed your review. Is the honeycomb bed steel or aluminum? I would like to use magnets to hold down flexible material.
Thanks. It’s aluminum. But i think most of them are. I seen somewhere a some hooks that can be pushed into the honeycomb to hold down thin materials, that could be cut out of wood with a laser
Looks great. Will it cut metal as well?
I guess not. maybe very thin aluminum, soda can or spray can.
@@Ollaris That‘s a pity. It would have been a great help for your welding jobs on the T3 in preparing the replacement pieces…
Yes, but i can use it to test out pieces that i design before sending them out for water jet or plasma cutting.
I don´t want to believe that this machine can carve with 600mm/s. That´s 36000 mm/min!
But a nice machine, have Fun with it.
The burn marks tell me that there is not enough air for cooling and blowing the smoke away...
That’s my thought too.
как говорил Архимед - дайте мне денег и я переверну Землю!
Is it suitable to start a small business ?
I think it is, if you have good ideas and some skills with designing.
@@Ollaris i am worried about disturbing my neighbours :(
Really love the review! Best one I’ve seen. I don’t know how to use light burn… is there project library large? Is there a charge to access the projects? Thanks!
Thanks! The library is quite large and they add to it frequently. You don’t have to pay for it. You can check it out before you purchase the machine free of charge.
@@Ollaris wow.. thanks!
Great review. Thanks for sharing.
Thanks for watching!
How well does it work with things like anodized aluminium?
Not for that price
It’s half the price of a Glowforge and it has better specs. Definitely worth the price IMO
@@CocoBorderCollie why compare with glowforge? it looks more like the gweike is a cheap clone of the Makeblock / xTool Laserbox Rotary, even their packaging looks almost identical. you could get a Makeblock / xTool Laserbox Rotary for $4k or $3k refurbished