Stock making at the Pedersoli factory

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 296

  • @comradeyars
    @comradeyars 5 лет назад +9

    We're so fortunate to have a company like Pedersoli making these old firearms today. I'm thankful.

  • @christopherkelley773
    @christopherkelley773 9 лет назад +20

    I bought a 1777 Charlesville [French army] smooth bore from them and have never regretted it. Their products stand out when stacked with other makes.

  • @notsosilentmajority1
    @notsosilentmajority1 4 года назад +13

    Just when it seemed like the Pedersoli were a bit expensive....... you realize they are well worth it. Beautiful work.

  • @billwessels207
    @billwessels207 7 лет назад +5

    I am impressed by the amount of hand craftsmanship goes into each piece. Beautiful work, I have owned a number of pedersoli rifles and handguns over the years. Never knew that so much was actually hand crafted. Thanks a lot for the video and the tour.

  • @keithtidswell2225
    @keithtidswell2225 6 лет назад +2

    The care and craftsmanship exhibited by these artisans at every step of the design and production results in a magnificent firearm of which all at Davide Pedersoli can be justly proud. A very nice video. Congratulations.

  • @migalito1955
    @migalito1955 3 года назад +1

    Fascinating.
    As a retired individual who works in his wood workshop daily I really enjoyed watching the process.

  • @cs-rj8ru
    @cs-rj8ru 7 лет назад +2

    Truly amazing there is such a demand for antique style firearms. I'm glad to see Pedersoli is in business and building quality firearms with profit.

  • @MOAONAABE
    @MOAONAABE 7 лет назад +2

    beautiful. you can really tell mr pedersoli loves the history of these firearms and the connection he has to the usa. bravo

  • @thra5herxb12s
    @thra5herxb12s 7 лет назад +94

    You just know that Mr Pedersoli started by making guns in his shed at home and delivered them to the customer in his own car. He understands every single process that happens in his factory.

  • @alainmorin
    @alainmorin 6 лет назад +6

    So so so beautiful, thanks for this documentary! I own and shoot a Pedersoli Hawdah 45 Colt / 410 and am SO happy with it!

  • @daveyjoweaver6282
    @daveyjoweaver6282 7 месяцев назад

    Thanks So Much for this next part of the tour! You can feel the dedications and craftsmanship of the workers and see the quality! Many Blessings and keep some powder muzzled at the range! DaveyJO in Pennsylvania

  • @Peter57808
    @Peter57808 8 лет назад +20

    finishing stocks with an Italian mountain view would be workplace bliss for me

  • @billietyree2214
    @billietyree2214 7 месяцев назад

    These guys do great work. I bought a 10 gauge shot gun kit and all I had to do was smooth, sand and oil the stock. I can’t imagine how the stock could have been inlaid any more perfect. The metal all fit the stock perfectly. I am now going back for a Howda. Great craftsmen at pedersoli.

  • @jojo123469
    @jojo123469 7 лет назад +1

    These guys must have fun doing this. Its a work of art. This is not a job, it looks like so much creativity and art work. Beautiful factory...Canada

  • @Perkinator104
    @Perkinator104 7 лет назад +18

    That fellow cutting the rough shapes from the walnut slab has some serious skill. If I was cutting $X,000 of wood every day, I would be so slow with it, but he just busts them out perfect in seconds!

  • @charliewecker
    @charliewecker 11 лет назад

    This channel never ceases to amaze me. Pedersoli is the real deal.

  • @stevepritchard7957
    @stevepritchard7957 4 года назад +1

    Wow one of the best videos I’ve seen in a long time. End result is more than a rifle it’s a thing of beauty

  • @stewart51able
    @stewart51able 10 лет назад

    Thank you Mr. Pedersoli for your time. I will now know how good your product is and buy it.

  • @RobertKaydoo
    @RobertKaydoo 10 лет назад

    As the owner of 2 Pedersoli pieces I really enjoyed this. Thank you for uploading it.
    Peace.

    • @shonaoneill5151
      @shonaoneill5151 5 лет назад

      What type do you own? Which wood also?
      I am going to be buying one once I have sold my benelli m2 ;-)
      If anyone is interested (UK only) , let me know. (RFD transfer only)

  • @RunFast64
    @RunFast64 4 года назад

    CNC wood working machines make a fantastic job even better and more repeatability. Less fitting and more interchangeability. It leaves you more time to make the wood stocks look and fit even better. Thanks for the tour.

  • @wheels6566
    @wheels6566 9 лет назад +7

    Not just guns's, but work's of art! Just Beautiful

  • @tomsterism
    @tomsterism 10 лет назад +1

    Just now seeing this piece, Cap. Simply magnificent work, sir! This makes me want something...anything from Pedersoli!

  • @johnwall7968
    @johnwall7968 4 года назад +1

    Ok. I've been getting started with a Roger's Rangers impression, and I've been on the fence about dropping $1300 for a pedersoli brown bess, vs only having to shell out around $600 for an Indian made musket. Before seeing this documentary, I could not justify spending so much money on a musket. Now I get it. Pedersoli it is.

  • @gamegeek201
    @gamegeek201 9 лет назад +7

    these tour videos are amazing. thanks for filming them

  • @BOHUNTER
    @BOHUNTER 4 года назад +1

    Incredible process, I'm very intrigued! Nothing like Figured Walnut! Best of the best. Great video and hanging them keeps gravity from pulling the grain and warping the wood!

  • @themadscientest
    @themadscientest 4 года назад

    I mean this just makes me want a Pedersoli made rifle even more! The attention to detail on every part is comforting, because I want my firearms to be made with exacting care and precision.

  • @badgamon9710
    @badgamon9710 8 лет назад

    I have a Charleville 1777 made by Pedersoli and I can tell that it's a really nice rifle. I really like the work they are doing there . Great job !!!!

  • @dougiequick1
    @dougiequick1 8 лет назад +1

    I'll bet a lot of people would have been blown away AMAZED back when modern fireams began to emerge that in 2016 a bunch of already obsolete models would STILL be manufactured and sold for higher dollar than far superior modern designs can be had for....Obviously people had ZERO idea what was to come as they disposed of obsolete weapons rather than hold on to them as an inheritance for their offspring...

  • @mroblivious3647
    @mroblivious3647 3 года назад

    I already love my .50 frontier flint! I've only had her a day, and can't wait to head to the range! Such a beautiful rifle

  • @spitfire4sergi
    @spitfire4sergi 8 лет назад +1

    The perfect fusion of art and science. Why black powder will always be the best!

  • @lmomechtech7709
    @lmomechtech7709 11 лет назад +2

    Thanks for this video look into Pedersoli! It is always great to have someone interested in preserving the ol' masters.

  • @stevemiller7433
    @stevemiller7433 6 лет назад

    My God... so much hand work and attention to detail. Now I understand why the Pedersoli products are more expensive.....and worth it.

  • @danilocabral3410
    @danilocabral3410 Год назад +2

    Sensacional! Que vontade de ter um mosquete desse! Parabéns a toda a equipe. Ganhei o dia!

  • @1951murph
    @1951murph 10 лет назад +5

    I have a Pedersoli Double shotgun in 10 ga and I love this gun! Very well made,perfect fit and finish. I would love a catalog to keep with the gun! So far two years with the 10 ga two wild turkeys!

  • @JustMe-ku6rk
    @JustMe-ku6rk 6 лет назад +1

    I really enjoyed this video. I don't own a Pedersoli yet but when I get my brown Bess and my Kentucky long rifle, they will be from Pedersoli. I've been to several gun factory tours in the US but I would love to go to the Pedersoli factory.

    • @crominion6045
      @crominion6045 5 лет назад

      I bought a Pedersoli Brown Bess a couple years ago. It is absolutely beautiful and functions flawlessly. I also have one of their percussion Harper's Ferry pistols, and it is equally excellent. Pedersoli makes amazing guns. 👍

  • @rfdsrd
    @rfdsrd 8 лет назад

    A most excellent video. These dayze, some of the finest long gun rifles and smoothbores - both muzzleloaders and cartridge actions alike - in the world are made and offered by Pedersoli. In particular are their rolling block Remington replicas, of which no other mass produced versions can compare with Pedersoli - not anywhere. I have a pair of Pedi rolling blocks in .45-70 and a Pedi '74 Sharps Sporter #3, none are better by any gun maker - a tremendous value and superb shooters. Grazie molto, Pierangelo!

  • @jim778
    @jim778 6 лет назад

    I would trust this company if I was buying from them. There attention to detail is very good and the men working on the rifles are not just workers they are master craftsmen ! I hope someday I can buy a rifle from this company.

  • @SteveAubrey1762
    @SteveAubrey1762 9 лет назад

    This video shows why Pedersoli's are so good. I have 4 Pedersoli guns and love them.

  • @CyranofromBergerac
    @CyranofromBergerac 3 года назад

    I just had my 12 gauge muzzleloader come in the mail an hour ago. It's beautiful. Can't wait to shoot it!

  • @andrewnawarycz3026
    @andrewnawarycz3026 3 года назад +1

    Excellent to see the tight tolerances done as normal 👍

  • @perfecttofu421
    @perfecttofu421 10 лет назад +10

    you hang the stocks like that because it keeps them straight and prevents warping. you do the same with pool cues to fix warpage.

  • @richardpersoage8504
    @richardpersoage8504 10 лет назад

    What a pleasure to see true crafts people at work.

  • @pvpixelarts
    @pvpixelarts 10 лет назад

    Excellent video that covered the most important element of the gun and its making.

  • @peteraugust5295
    @peteraugust5295 7 лет назад +1

    Thanks for these great Videos to you and to Pedersoli!
    Absolutely great to see this!

  • @alainwelonek5972
    @alainwelonek5972 Год назад

    Woah!! I am very confident after I saw this video that my next rifle will be a Pedersoli 1853 enfield
    Great attention to details and craftsmanship , wonder they are a little pricey
    ,

  • @marianmoesinger3825
    @marianmoesinger3825 4 года назад +1

    The Brown Bess Musket I want sells at $1,100 - $1300 USD sounded abit iffy for me "BUT" after watching this video you are not just buying a reproduction firearm, but a labor of Craftsmanship and Love.

  • @sahmadi1000
    @sahmadi1000 2 года назад

    I am glad that I saw this Video. I used to think, these guns are factory made. I did not know this much hand work goes into making them.

  • @o2wow
    @o2wow 9 лет назад +40

    A computer controlled milling machine inletting a stock for a muzzle loading rifle, fantastic. :)

    • @googlepissoff5776
      @googlepissoff5776 5 лет назад +3

      MarxistWelder: It would also be a lot more expensive so

  • @duncanandrews1940
    @duncanandrews1940 11 лет назад +1

    I was lucky enough to visit the factory when I was last in Italy and it was the best day of the trip! The produce the BEST BP replicas - no doubt in any way

  • @masadelacasa
    @masadelacasa 3 года назад

    Ok, now I know how my flintlock Frontier stock is made. Nice work!

  • @sheamartin911
    @sheamartin911 Год назад

    I have a pedersoli Old English double barrel 12 ga shotgun and it is so beautiful and works perfectly. im still experimenting with the load and shot sizes to see what works best and I love every moment of it.

    • @capandball
      @capandball  Год назад

      Some help for patterning the shotgun: ruclips.net/video/iCbK9wHsW_Q/видео.html

  • @blackpowdermaniacshooter
    @blackpowdermaniacshooter 8 лет назад

    I bought one f their Kentucky flintlocks 3 hers ago. I've put 4000+ balls thru that gun & it still works great. I'm very pleased with this product.

  • @marcinr4399
    @marcinr4399 4 года назад

    I bought a pedersoli muzzleloader shotgun recently. Precisely it's the "slug" shotgun which I preferred because it has two cylinder bores which makes it easier to load being a muzzleloader. And I gotta say honestly I really like the feel of the gun, it's well balanced has a pistol grip, stock is a nice piece, materials seem great quality. However in my particular example the fit and finish leaves a lot to be desired. Trigger play in the right barrel trigger (not a problem in a shotgun but still), rear trigger isn't covered by the trigger guard completely. Trigger guard and trigger assembly are connected with one tiny hinge and they fit into the stock very tight so it takes care to remove it and put it back in in order to not snap that pin (hinge). I had to clean out the locks, trigger assembly and insides of the stock because after first shooting I took the barrel off and noticed a lot of dirt, shavings etc from production. Buttplate not sitting flush with stock in one spot (about 1mm gap, also not really a problem as I use a leather recoil pad to save the plate from scratching). And even tho barrels are accurate, well made, smooth and polished the bluing is really spotty. Even one screw for that strap on top where barrel hooks into has a hole drilled at the wrong angle so the screw head doesn't sit flush.
    Overall i really like the gun but small details like that leave bad taste especially that those are supposed to be basically premium guns. For the premium price.
    Sorry for a bit of rant, I don't want to discourage anyone from pedersoli guns, I just advice to take a close look at them like I failed to because I was in a hurry

  • @karamellisiertesfallobst8303
    @karamellisiertesfallobst8303 3 года назад

    I own a Lightning in 357. with a simple, but very eye-catching walnut-stock. Love it.

  • @CaptGus
    @CaptGus 10 лет назад +9

    Thanks , now I know what manufacturer to buy from

  • @steinderbush
    @steinderbush 11 лет назад +2

    Thank you for this absolute awesome video!! These guns are super!! unbelievable craftmanship!!

  • @taxidermist4
    @taxidermist4 7 лет назад

    Thank you so much for the tour. It was very impressive.

  • @skinbasher
    @skinbasher 8 лет назад +2

    Awesome!!!!
    I'm a proud owner of a Pedersoli Kentucky Rifle.

  • @libbybrainworm777
    @libbybrainworm777 5 лет назад

    Pedersoli is by far one of the finest firearms manufacturers in the world.

  • @adrianlarkins7259
    @adrianlarkins7259 10 лет назад +10

    Very interesting. Now I know why you pay more for Perdersoli. Those finished stocks were utterly beautiful. How I wish I could afford one of their "top of the range" examples. Here's a thing. I happen to know Purdey and Holland & Holland get their walnut from Turkey. I can only think the reason Perdersoli get theirs from USA is because the guns they make are mostly of US origin and the American wood is more visually authentic.

    • @cesargijon
      @cesargijon 7 лет назад +2

      American walnut is also used in the european models and the main reason is that it is a lot cheaper than the more beautiful and stronger Turkish walnut.

    • @cs-rj8ru
      @cs-rj8ru 7 лет назад +2

      Turkish Walnut may be stronger in cases. Every stock I own made with Turkish Walnut is quite soft however...

    • @elonmust7470
      @elonmust7470 2 года назад

      @@cesargijon Black Walnut from America is the finest Walnut wood on earth.

  • @BLACKIETHOMAS
    @BLACKIETHOMAS 11 лет назад

    i am very impressed with the pedersoli arms.. great tour

  • @norseman5041
    @norseman5041 7 лет назад

    Nice to see such pride in their work and what they make. Loved this post, craftsmanship can not fully be replaced by machines. At least not yet :-)

  • @ilcanalediOmar1
    @ilcanalediOmar1 4 года назад

    Per una volta mi sento onorato di essere italiano grazie per aver caricato questo video :))

  • @mountainmama5049
    @mountainmama5049 4 года назад

    I’ve taken deer and elk with my Pedersoli Rocky Mountain Hawken 54 cal. Very accurate the weight absorbs the recoil.

  • @1683clifton
    @1683clifton 10 лет назад +22

    That lady sanding had a good day when her boss was saying "see here, perfect, perfect, perfect!"

    • @sionsoschwalts2762
      @sionsoschwalts2762 7 лет назад +6

      She didn't understand English.

    • @miltonSF
      @miltonSF 7 лет назад +2

      Sionso Schwalts but perfecto is perfect in Italian so she might understood lol

    • @1683clifton
      @1683clifton 7 лет назад +1

      wrong! (Donald Trump)

    • @bastogne315
      @bastogne315 4 года назад

      He wanted to screw her.

  • @iBleedStarsAndBars
    @iBleedStarsAndBars 5 лет назад

    Love watching the skills of true craftsmen. No doubt these guns are made with pride

  • @desai5953
    @desai5953 10 лет назад

    Best process you adopted.
    Thanks for video.

  • @rattinox
    @rattinox 8 лет назад

    This is really great stuff!! I learned black powder gunstock making the hard way. (American Rev War Brown Bess muskets) Wish I had Pedersoli's great equipment!!

  • @thomasallen3818
    @thomasallen3818 5 лет назад

    One other thing, the walnut used is some of the most beautiful walnut I’ve ever seen.

  • @ohlordy2042
    @ohlordy2042 2 года назад

    So many expensive machines, so much time, so many highly skilled craftsmen.
    These things must cost a bomb to produce.
    It amazes me there is a mass market for this sort of historical replica. But I'm glad there is!

  • @thomasallen3818
    @thomasallen3818 5 лет назад

    I love my Pedersoli Sharps Down Under sporting rifle, in .45-70. It’s an amazing rifle. Extremely well made.

  • @keithlincoln1309
    @keithlincoln1309 Год назад

    I now have to own one! My God, how many hours of hand work/finish on each gun!!

  • @lmomechtech7709
    @lmomechtech7709 11 лет назад +1

    Very beautiful wood working and metal fitting.

  • @campcrafter4613
    @campcrafter4613 7 лет назад

    Great video ! this convinced me to purchase a Pedersoli!

  • @mountainmama5049
    @mountainmama5049 4 года назад

    They are hung to keep the wood from warping. The weight at the bottom helps to keep the stock straight.

  • @bluesboydude
    @bluesboydude 8 лет назад

    The part when the ramrod channel was drilled.. Was the musket sawed in half?

  • @touchthepast8467
    @touchthepast8467 10 лет назад

    Truly fantastic video. In fact, this video is what convinced me to bite the bullet (!) and purchase a Pedersoli Richmond rifle (it arrives tomorrow). Thank you for your excellent work.

  • @Raftjumper07
    @Raftjumper07 9 лет назад

    Magnificent! I am very interested in buying one of their Jaeger rifles. Interesting that they use American Walnut for their stocks and he learned to finish the stocks while in the US. Thank you for posting this!

  • @daddski1
    @daddski1 9 лет назад

    Are they hanging that way for final drying and straightening?

  • @FerrazLuizC
    @FerrazLuizC 10 лет назад

    Good night,
    Now watched a little video about the process Pedersoli stock Factory.
    I am fond of restoring butts but so far have not found the ideal products for the next working perfect. Sealer, dyer, Stain, wax, which are the best?
    I saw the video the process after the end lixamente, but needed to know what products utilizarm to finalize the butt and let that wonderful result! For example, what kind of sealer do you use? after which the dyer sealer (stain) that use? after which the process oil used for the final wax finish?
    Anticipate thanks.
    att

  • @WillBuryU
    @WillBuryU 8 лет назад +4

    I love it. Great work

  • @MrSIXGUNZ
    @MrSIXGUNZ 9 лет назад

    cant get over the work and love that goes in to every step !!

  • @andyoreo333
    @andyoreo333 6 лет назад

    Do they hang them to keep the wood from bowing?

  • @steinderbush
    @steinderbush 11 лет назад

    Great video Thanks!! Those guns are absolutly beautiful, made with great craftmanship!

  • @GodseyKnives
    @GodseyKnives 7 лет назад

    the stocks are hung that way to prevent warp and twist ?

  • @henerymag
    @henerymag 11 лет назад

    Now I know why my P53 Enfield is such a beautiful rifle. It will surely keep it's value.

  • @SWATDRUMMUH
    @SWATDRUMMUH 5 лет назад

    Classics never go out of style

  • @cavscout888
    @cavscout888 3 года назад

    We feel information is being cut off to make it more of a visual thing. We want to hear a lot more from him! Make a long version please!

  • @Hi-lb8cq
    @Hi-lb8cq 7 лет назад +1

    very beautiful work

  • @jameshoffmann6881
    @jameshoffmann6881 5 лет назад

    wish they would have shown the hand checkering process. own a 74 sharps quigley in 45-70 & some of the checkering is outside of the outline edges. is hand checkering supposed to be like that? a lot of guys say hand checkering ruins a gun as mistakes do happen. i think5 it adds character, yet it bugs me a little.

    • @Jack-ek6bs
      @Jack-ek6bs 5 лет назад

      No it supposed to be in the lines, just think of it as a character boost.

  • @hohenwolf9298
    @hohenwolf9298 9 лет назад

    Wunderschönes Video von David Perdersoli.
    Mich würde sehr interessieren wie im Video ab 23,06 Minuten das weiße Pulver vor dem letzten Finish heißt? Dieses wo den Schaft leicht matt macht aber die Maserung sehr schön austreten läßt. Würde mich über eine kurze Info sehr freuen,danke!

    • @PlayLikeDrunk
      @PlayLikeDrunk 9 лет назад +1

      schleifstaub der beim abschleifen von sehr hartem klack oder kunststoff entsteht vermutlich mit 800 körnung oder mehr geschliffen . hoffe ich konnte iwie helfen :)

    • @PlayLikeDrunk
      @PlayLikeDrunk 9 лет назад

      schleifstaub der beim abschleifen von sehr hartem klack oder kunststoff entsteht vermutlich mit 800 körnung oder mehr geschliffen . hoffe ich konnte iwie helfen :)

    • @PlayLikeDrunk
      @PlayLikeDrunk 9 лет назад

      schleifstaub der beim abschleifen von sehr hartem klack oder kunststoff entsteht vermutlich mit 800 körnung oder mehr geschliffen . hoffe ich konnte iwie helfen :)

    • @gus23a
      @gus23a 9 лет назад

      +Hohenwolf
      Da wird der Lack einfach nochmal abgeschliffen, um eventuelle Unebenheiten zu beseitigen. Das ist einfach der Schleifstaub der dabei entsteht. Danach wird der Kolben aber nochmal poliert.

  • @ronhart8857
    @ronhart8857 8 лет назад

    Thank you , Happy Holidays, may you enjoy 2017

  • @Bizzhatesme
    @Bizzhatesme 10 лет назад +4

    The stocks are hanging like that to prevent warping.

    • @shonaoneill5151
      @shonaoneill5151 5 лет назад

      Is that true? I thought it would simply be for storage and space saving. At 6/7% humidity, surely the warping issue is not a problem?
      Unless weighted significantly at the bottom it isn't going to stop any sort of warping.

  • @dominic0147
    @dominic0147 11 лет назад

    they hang like that to keep the wood from warping in anyway and to keep it safe from any damage from laying it down for long periods

  • @danstenis660
    @danstenis660 3 года назад

    Why are the stocks hanging vertically?

  • @USMarineRifleman0311
    @USMarineRifleman0311 10 лет назад +12

    These people are goddamn geniuses and artists above all else. Proud owner of a dp Brown Bess

  • @CrazySC833
    @CrazySC833 7 лет назад +2

    And this is why I'm willing to spend $1,000+ on my pedersoli muskets

  • @phishENchimps
    @phishENchimps 11 лет назад

    well made video. i was just passing through. but stayed till the end. nice job.

  • @hakimmic
    @hakimmic 11 лет назад

    excellent workmanship.

  • @Βασιλης-ο5ω
    @Βασιλης-ο5ω 8 лет назад

    hallo sir really nice and interesting video.greeting from hellas.there in italy does the guns law allows you people have rifles and pistol and even conceal carry ??cause here in hellas greece we allowed only to have shotguns.