1989 Lada Niva restoration
HTML-код
- Опубликовано: 8 сен 2024
- 3 year picture slideshow of 1989 Lada Niva transformation.
Following accessories were added to the car;
- Engine was bored out to the new standard 1.700 cc engine size, intake, exhaust ports and
manifold are larger diameter. Weber DGEV carb with Donaldson filtration system was added.
- Power steering
- 30x9.50R15 Tires
- 9000Lbs winch with remote
- Jeep Wrangler aftermarket bumpers and side steps (EAG)
- Custom spare tire carrier
- Viair air compressor and tank with bumper connection front and rear
- 5 Gallon water tank with 1 GPM water pump with front and rear bumper connection
- Air horn
- Custom roof rack with 4 LED lights
- Front and rear camera
- BMW 3 series foldable front seats
- President McKinley CB radio with rear bumper mounted 4 Ft antenna
- Body sprayed with custom blended desert sand color Tintable Raptor Liner
- Custom upgraded rear suspension springs due to extra weight
- F-Design front lift kit
This is the most beautiful build i have seen!
I am going to start my "92 Niva resto in the next year or so. Can't wait. This build is a huge inspiration. Thanks!
can u post updates please if u started
Awesome! I'm planning a trip to Africa from Budapest, and I chose the 1.7 Niva for the Great Adventure. One day I hope to travel all around the globe starting from Budapest to Russia and China, trough Alaska to Canada, all across the US, and back to Europe on ship. Anyways, you did a great job on that Niva!
Good luck
Lada Niva's are king of Offroad not to mention cheapest of them all you can get gud one on Balkan contries for only $200-$300 and it can cost less $1000 or just $1200 sence their parts are cheapest and easily to be fixed and they are fun to drive around i had hell of a fun with em their manuals are amazing Russian from past are geniuses !
I have the same 1600 model from 1989, but my has stock beige color. I've restored it slightly 10 years ago (mostly rust removal, new lights, new seats, interior plastic), and I have always wanted to do it like exactly like you did yours. Unfortunately, most of the mods that you have done would make it street illegal due to laws and regulations in my country, so it always remained a fantasy of mine. I am glad to see someone actually made it, exactly like I wanted to do mine. I hope that you added diff locks for rear and front axel too! 🙂
Hi, thanks for the comment, I am lucky in that way that here in the US the regulations are not too strict yet. I'm originally from Belgium, and I know for sure I could never have done this there either. :) Don't have lockers yet on the axles, and if I do it will be in the rear, easy access when something goes wrong with them compared to the front.
Amazing! Best niva what i ever see!
Congratulations - she looks beautiful! A truly amazing transformation. Thanks very mush for sharing your journey!
that is absolutely stunning!
Beautiful, i love the tan paint !!! :)
Great job. I wish I had a place and tools to do this.
Very nice car.
Thanks
That's amazing. Good job.
Can you tell me how much total restoration costed you?
ربي يرزقني بوحدة كيما هذي 🙏❤❤
Как же все таки делают красиво, браво, молодец, Американцы молодцы
Это скорей всего Канада)
thats a stunner man
gracias por compartir...excelente video..felicitaciones
Are you from Canada ?
Great job , Amazing vehicle ! happy to see that I am not the only one Niva enthusiast out there .
Thanks, no, the car came from Canada, but I'm from Michigan.
Tom Vanmoorleghem I knew that the car is from Canada :) also imported one from Canada to California .
eastsiderz yes I am .
Absolutly awesome job😍👍
Exelent style!
Perfect
Nice job
Вот что значит любить Ниву.
Hi, beautiful build. I understand the front seats are from a BMW M3, but can you please let me know what car the rear seats came from, thank you.
IMPOSIBLE ❤❤❤🤩🤩🤩
Super
How did you get such a stand to lift and rotate the car ? Are you located in Hungary, I am in Gyal and could use some help to aquire such a stand for my 2105.
bellissima
nice
this is the best restoretion ! congratilations for hard work ! the name of the color ?
такие задние фонари мне нравятся больше, чем у современной модельной версии, хотя и здесь не оригинальные.
Felicitaciones es la mejor restauracion de una Niva yo he visto yo tengo una roja igual y la deseo modificar por fa consejos
Hey man, wanted to ask you if you could provide , links and names for he parts that you bought for your car . Restoring my Niva and I really like the way your cake out.
1. The roof rack , where did you buy ? Possible if I can get the link to it.
2. The four leds as well as the 2 on front bumper.
3. CB radio with antenna , how many feet is your antenna ?
4. Side steps and front and read bumpers.
If you can send me the link to these parts where you bought from, or if you could provide me with the model numbers.
Highly appreciate your help.
Pretty much most parts were aftermarket parts for a Jeep Wrangler, the bumpers are from EAG, the roof rack was custom made from a standard roof rack from Amazon, if you look at the pictures you will see it was custom welded, the side steps again are for Jeep Wrangler 2 door, but adapted to fit into the 2 jack holes on the bottom of the car. The spare tire was added to the rear bumper by welding a universal spare tire hinge kit, and welding tubes together. Antenna is 4 feet long from Firestick. Niva specific parts as wheel arches and snorkel were ordered from Russia. There was lots of welding involved to adapt everything to the Niva, but the Jeep Wrangler choice was the closest to Niva Specs. Hope this helps.
Thank you very much for getting back and providing info.
Lada Niva Resto also wanted to find out , How did you reproduce the door Tag with Vin Nunber/model and all the vehicle Info. where did you buy the screws to attach the tag back to the car . Thanks once again for all your help .
@@zaurr4157, I had this made locally at a laser engraving shop, it is just black anodized aluminum with letters and numbers laser engraved, I used rivets to permanently attach it to the vehicle.
Thank you very much for the info.
Bravissimo, che motore è cambio hai montato?
Nossa muito da hora serviço lindo
What is the set up for weber carb(jets and other...)? Nice job....outstanding
Hi, I actually converted it to a Holley Sniper EFI system last year, which is a carb style single point EFI. I will post a video soon.
Hi, from Spain, the Holley sniper, fits in the niva manifold? A short video will be great!!!
My dream
Eu tenho uma pergunta , este niva anda bem com estas rodas e pneus na estrada .
I loved your project! Which car are these fender flares?
Hi, Thanks. I ordered them from this site, they were made for Niva. niva-lada4x4.ru/
Donde puedo ver mas vídeo sobre esta hermosa lada niva. Deja me un link
Hi, right now this is the only one, but we are working on another one about the Holley EFI system that I installed.
Hello once again ,
Wanted to ask you , it looks like you had changed the old seat belts right ?and if yes , did you save the old once then? The reason why I am asking because I missing belts and was looking for the ones the car came with. I am Intersted in buying then. Please let me know .
Thank you very much. For all your help.
Hi, the seat belts that were in the car originally were lap belts and in very bad shape, I no longer have them unfortunately. Thanks for your question.
Lada Niva Resto Thank you for getting back to me and my apologies for late respond . Happy holidays .
how many money you spent for it?
нива рулит...класс
Que color de pintura lleva el Niva??
Great car. Would you mind sharing what type suspensions you used to restore your Niva?
Front and rear suspension 50mm lift kit is from F-Design in Russia.
Are you in the US?
should i try to restore my dad’s old niva (i think from 1996)? it has been sitting for like at least 6 years
it all depends what the condition of the vehicle is. Here in the US, I had to use vehicles that were available to me over 25 years of age. If you like the vehicle and it's in good shape, why not, save another Niva life :)
Excelente trabalho.
Where did you get those black bonnet inserts. Love them
They are from Land Rover or Range Rover, side ones are Discovery
hello, what is the size of the rims and the wind up suspensions?
The rims are Pro Comp Steel Wheels Series 51 Wheel with Flat Black Finish (15x8"/5x5.5"), suspension is from F-Design in Russia but springs in rear are thicker in coil wire diameter to cope with the extra weight of the rear bumper and roof rack.
Nice job. Do you do custom orders or only for yourself?
So far I have done this for myself, but I am open to explore custom orders. The hardest thing is parting with cars you put all the time and effort in. :)
Magique
🙂👏👏👏👍
I wich if i can restorat my 87 niva lik that
Only in America ☺️
Vous faites du Ferris !!?
Hi, yes we do sell Ferris mowers
I from México, i need information!!! 😍
Hi, let me know what info you are looking for.
How much total resto proje?
To be honest, it's hard to put a price tag on it, this was a 3 year project and didn't really keep track, but I would guess we are looking somewhere between $8,000 and $10,000, I just finished putting a Holley EFI kit on my Niva, I hope to get a video up soon.
@@ladanivaresto9699
Thank you for the valuable information you have provide. And I hope you will finish your project as soon as possible. All I want to ask is the name and brand of paint used on the vehicle?
@@yusufevren6300 We used raptor liner on the outside of the car.
@@ladanivaresto9699 hi i need information on how to restore my lada
@@ladanivaresto9699 can i get something like a contact if you won’t mind
Hi
Music leaves much to be desired.
Qual a medida dos pneus
Tire size is 30x9.50R15
@@ladanivaresto9699 QUAL a tala da rodas
@@joaopedrodealmeidafrancisc5588 Wheels are Pro Comp Steel Wheels Series 51 Wheel with Flat Black Finish (15x8"/5x5.5")
@@ladanivaresto9699 muinto obrigado o senhor me ajudou muito pra mim fazer o meu projeto
@@joaopedrodealmeidafrancisc5588 You are welcome