Chevrolet Chevy Cruze Rear Bumper Cover Removal And Installation (2012 - 2014)
HTML-код
- Опубликовано: 25 авг 2024
- How to remove the rear bumper cover on the Chevrolet Cruze. This should work on 2012 - 2014 models.
Watch out for those plastic tabs - they are paper thin and break easily.
Great video. My only issue was for some reason my 2014 cruze had T20 screws, not T25, in the wheel well. Didn't bring the T20 bit with me to do it, so thankfully I started there n ended up waiting till I had the right one
First thanks for the how to
Just replaced the bumper on my cruze watching this gave me a good idea of what to do but with a few changes as its a hatchback model so a little different
The changes are the lights are held in by 3 screws and a couple of push fits so you don't have to unplug them once out they can hang into the rear
The only other change is the number late lighting this can be found behind the bumper a large block connecter just remove the locking pin and pull apart the rest of the lighting can be removed once the bumper is off
Hey do you remember how much it cost you to replace that bumper?
Any idea about the models with the rear parking sensors, i.e. if there is something else that will need to be unplugged?
Best video on how to do this ever.
I’m here because I drove through a large puddle on the freeway 60 mph at night and when I got home earlier, I realized I didn’t have a rear bumper anymore.
Is there a way to change the ones that hold the rear bumper
thanks it was very educational!!!
What the piece where the gas goes in can that be replaced?
Thank you for this video
Thanks 😊
Awesome Video. Thanks
Does it work for 2015 as well?
Now for the video I watched from another and broke 2 clips um do you have a video on how to fix that please?.
What is the silver bar that I see before you put the bumper back? On? What part of the body is that
@mookie9499, if no one else has answered you, I believe you are referring to the actual "bumper". What is being replaced is considered the bumper cover.
I just wonder where is the tow hitch of 2012 Chevy Cruze?
Thak you for sharing this....Would you explain how bumper is design I mean to say concept design at basic level
Is the filler just the aluminum bar seen when the cover is off? No foam or eggcrate material in there? I got rearended lightly and it appears to be just cosmetic, thinking about pulling the rear cover off like this and painting myself. If the inner bumper is really just aluminum like that, I can inspect it once the cover is off and not worry about ordering new foam parts. Thanks!
There is no material other than the aluminum bar.
Hey do you remember how much it cost you to replace that bumper?
+Preston Peters insurance covered it, so at "full pricing" I think it was $1100. That included the bumper, paint, labor etc.
I am trying to gwt the corner of mine to go back on, can I just press down on the tabs and push it back in? It got pulled off on a curb 😂
If the hooks/cover were ripped off if the bumper, is it safe to assume that the entire cover will need to be replaced? Essentially I am asking if those pieces(on the bumper cover) are able to be replaced allowing your damaged cover to be reinstalled? Sorry if this has been asked!
If it came down to having to replace the bumper all because of those clips breaking. What i would do is buy a plastic welder kit and melt plastic on to it and then use a dremel to drill little rectangular holes. Im someone who has the patience for that. But i definitely would not spend the money on buying a whole new bumper because of clips.. Hell no! Heres the link for a plastic welder, which is cheap comparing the price to a bumper. You can get a cheap dremel also. For less then $80 im pretty sure you would be able to fix a plastic bumper. www.amazon.com/Jounjip-Plastic-Welding-Black-Rods/dp/B07RG8K18D/ref=asc_df_B07RG8K18D/?tag=hyprod-20&linkCode=df0&hvadid=343955664153&hvpos=&hvnetw=g&hvrand=12949023046050832239&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9004422&hvtargid=pla-944072896512&psc=1&tag=&ref=&adgrpid=70729708513&hvpone=&hvptwo=&hvadid=343955664153&hvpos=&hvnetw=g&hvrand=12949023046050832239&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9004422&hvtargid=pla-944072896512
Hi, did you screw the T25 back at the inner fender? Cos i have my rear bumper fell off yesterday on a hi-way luckily we are all safe. And i think i can fix it by myself but im not sure if its still safe to use if one of the plastic stab was broken.
All I can say is good luck with your repair, I made this video so long ago I just don't remember
@@happywrenching thanks i already fixed it
Does this apply to Chevy Equinox too?
Is removing the rear bumper on a 2013 Malibu similar to this procedure?
Very useful thx
mine has a little fender bender that needs changing. u know where I can buy a replacement
You can order it online at gm
Does the rear bumper for chevy cruze 2015 has a sensor on it?
How much should it cost??? My rear bumper is about to fall off right now I have it held on with tape I obviously need to order a new bumper and take it into a shop to get fixed what would be a fair charge I'd appreciate it if you can get back to me
what are the two gray flaps for on cars frame when the bumper is removed at 5:26
Ben Gonz those there to vent the car. When you close the door it creates a high pressure zone. Car manufactures take advantage of these vents to slowly let the air out to give off the illusion the doors are heavy vaults when they close. If you ever have an air freshener in the car and the hvac fan on full blast and smell the air freshener outside the car it's because of those vents.
In short they are vents for the car when you close doors and vent the air in general.
t436 I thought they were vents but just for the trunk not the whole car so thank you for the info
What size goes on that ratchet
Someone hit my car and I'm thinking about replacing the bumper myself and having a shop paint it. My question is would the shop paint it before it goes on the car or after its installed?
Normally the bumper is painted while it is off the car.
Hey do you remember or know how much i cost you to replace the bumper?
Just how much is a front / back bumper for a Chevy Cruze LS Eco Tec 2014?
I need to buy a rear bumper for my cruze but dont want to pay allot of money..
@@loving3vil rear bumpers are easier to find than fronts at the local pic-a-part. I got one for 60bucks, with warranty; however, now I gotta diy paint it to match.
Is there any difference in the 2018 model? I have a rear bumper to paint
Did you get yours off? Was it pretty similar? I'm looking to swap my stock bumpers with the RS bumpers
@@starkiller6669 I never did the job
how can you fix a crank on the rear bumper of a Chevy Cruze
No be gots a crank
how much do a rear bumper cover normally run
yo man can you help me out i lost my back bumper hit a sign right side fell off no dents nor scrashes on bumper. but having a hard time to place bumber back on
Watch the video.....Otay?
Man if someone used those tools on my car removing plastic parts or clips that wasnt meant to be used for that I'd be pissed. That's what they make specialty tools that are also non marring and have a hook type end to pop up the retainer heads. Use the correct tools please.
Goes to grave this man will be remembered for using correct tools , cars are junk used for transport from A to B live your life stop worrying about junk