Hello! Thanks! for a valuable Video. Do you know how to buy Vida Dice for Volvo cars from Model Year 2018 and up? And do you know if my Volvo s60 D3 150 hp 4 cylinder, Year model 2018, is exactly the same, in the engine, as your engine is in the Video? Can I follow your video, when I have to change the valve cover gasket on my car? Thanks! From Tommy Bertilsson from Sweden
Should be the same on the top. Maybe some small tweaks, but shouldnt be that dramatic to need an entire new video. this is after comparing the D4 in the 2019 V60CC my parents have vs the D2 in my V40 (2.0)
Hi, Yes from Hull Unit 31 Kingston Industrial Estate English Street. Gasket replacement cost £230 with genuine Volvo parts. Also you can contact us on Facebook Swedish Motors in Hull and book appointment. Thank you.
Hey guys I’ve a 2014 D4 133k miles have noticed the top of the engine is wet around the valve cover & seems to be dropping down on top of the gearbox & down. I did get the cam shafts & crank shaft seals replaced last year on the timing belt side. Then the manifold intake replaced by Volvo with a recall. Any help would be appreciated
Hi, the best what I can suggest for you to take Endoscope Snake Inspection Camera and check leaking place. www.linkpicture.com/view.php?img=LPic605388faedd491629618357
@@swedishmotors3999 i dont want to be anoying but can you help pleas so this mornig i drove the car and it displayed engine overheted please stop and it went avay later a drove again and it dodnt show anythit only anomaly i found was the coolant it the morning when it displayed message it was below min after i opend it and it was fine in middle ??
If he didn't care, he wouldn't have made the video. Lots of people ask the same question and it's not his full time job to make videos. Be gratefull for what he did do
Hi whereabouts are you based ? I have a leaky rocker box cover 2017 XC60 D4 is that something you can help with? Thank you
Glen Beaver
Hello Glen, we are base in Hull. Thanks
Great vid. Can you confirm the torque values for the head bolts and injectors ?
10Nm
Hi, why was it leaking through the seals though? Did you do the glove test? Was the glove inflating?
Hello! Thanks! for a valuable Video. Do you know how to buy Vida Dice for Volvo cars from Model Year 2018 and up? And do you know if my Volvo s60 D3 150 hp 4 cylinder, Year model 2018, is exactly the same, in the engine, as your engine is in the Video? Can I follow your video, when I have to change the valve cover gasket on my car? Thanks! From Tommy Bertilsson from Sweden
Should be the same on the top. Maybe some small tweaks, but shouldnt be that dramatic to need an entire new video. this is after comparing the D4 in the 2019 V60CC my parents have vs the D2 in my V40 (2.0)
What is the thread on the injectors, just so i can make a slide hammer to suit
what is the torque for the valve cover bolts?
Hi, I've got this issue on my 2016 D4 XC60. Is it safe to drive or does it need urgent attention at the nearest garage? Thanks!
Have you changed the gasket, is it leaking from the front or back side of the engine?
Hi, can you give me the parts numbers of gasket, washers and injection valves
Hi how much would this cost on my 2015 xc60 d4?and how long would it take as I'd have to wait with the car.thank you
Hi, it will take around 2-3 hours, for price please contact us on WhatsApp or Facebook. Thanks
Thank you. I have a S80 with VEA engine. I'd like to know How can I remove Fuel Pipe from Injector?! Thank you.
Cool thanks mate
What was the problem? Was it letting the oil out?
Are you from Hull and what is the cost for that job in V90 d4 2017?
Hi,
Yes from Hull Unit 31 Kingston Industrial Estate English Street.
Gasket replacement cost £230 with genuine Volvo parts.
Also you can contact us on Facebook Swedish Motors in Hull and book appointment.
Thank you.
Hey guys I’ve a 2014 D4 133k miles have noticed the top of the engine is wet around the valve cover & seems to be dropping down on top of the gearbox & down. I did get the cam shafts & crank shaft seals replaced last year on the timing belt side. Then the manifold intake replaced by Volvo with a recall. Any help would be appreciated
Hi, the best what I can suggest for you to take Endoscope Snake Inspection Camera and check leaking place.
www.linkpicture.com/view.php?img=LPic605388faedd491629618357
Was it maybe overheating cause i jave volvo s60 2014 it had a overheating message can it be the head gasket ??
Hi, sounds like cooling fan problem.
@@swedishmotors3999 i dont want to be anoying but can you help pleas so this mornig i drove the car and it displayed engine overheted please stop and it went avay later a drove again and it dodnt show anythit only anomaly i found was the coolant it the morning when it displayed message it was below min after i opend it and it was fine in middle ??
Sorry for my bad english
No worries.
You are from UK?
How far are you from Hull?
Thanks
@@swedishmotors3999 no i am nit from uk
Can you add in the video description what part numbers you replaced?
What was the problem for this type of action ?
Hi oil leaking through gasket seal.
Need a Volvo vida software in India 🇮🇳. After car year 2016 .....
What’s the reason of doing videos if people ask you questions for help and you don’t give damn…? 🤦
100% I found out the torque setting for valve cover is 10Nm
If he didn't care, he wouldn't have made the video. Lots of people ask the same question and it's not his full time job to make videos. Be gratefull for what he did do
Seems time consuming and annoying. I don't like design of that "plastic" engine. It looks too much like working with VAG engines.
What is the torque for the valve cover and injector bolts?
10Nm