You might know this lock from ruclips.net/video/ZBE4FAvlcvo/видео.html where I picked and gutted it. In this video you see how I put it back together. have fun - it's not so difficult if you own a plug follower with a slot and a pinning shoe.
It was just an example, foxxxy has 3d printed it. Others have also made them themselves from sheet metal. Or maybe another commercial source has them also. Good luck.
Great video. I had one today that required the front loader tool because the thumbturn side was not removable (without drilling), and your spot on about those cam pieces being different designs. Definitely need to pay attention when pulling apart so you know how they go back together. Thanks for sharing!
This was a great video. I'm from the US and have reassembled many locks but never the Euro cylinders. It's the part that everybody skips on the videos because it's not sexy. Thanks for publishing great content!
Great video - very useful to know how re-assemble - most videos show how to gut a lock but not how to put it back together - especially if it is a double sided euro lock
Thank you for doing this video my friend. I have a full Euro now, and it's nice to see how to put one back together. I've watched other videos on how to do this, but none recently. I have all the stuff to do it, just never got around to doing a full Euro.
Thank you - this one was easier than the average but you need to try it yourself to gain experience ;-) It's just pieces of metal, not a piece of art ;-)
i have a problem, when i removed the clamp and try to take out the plug the key got stuck in the cylinder and they both got stuck. Do i need to remove the second clamp or is my lock broken?
Great video, I have been struggling to pick a full Euro cylinder lock,and would like to strip it down and reassemble it ,using only the key, (without having to pick it) thanks for the information
With the spring steel clips it's easy ruclips.net/video/xmi3_QwoqjI/видео.html But for these bendy ones, special pliers exit. But I'm not possessing these pliers so I'm just using two small screwdriver to tighten the clip.
Exceptionally clear and educational tutorial! I've got the locks, just need the tools, patience and a little prayer to gut them. 👍 Is the pinning shoe you used homemade? I'm curious to see if I can make something similar from my "scraps" collection. 🤔 I really need to get my hands on Dremel type tool.
Haha, don't pray too much, just try it. Old euro lock are not hard to find and are cheap. I've messed up one or two but that's part of the thrill ;-) Have a look here for a home brew pinning tool ruclips.net/video/KP-9SdKinzE/видео.html It's made from a windshield wiper blade.
You might know this lock from ruclips.net/video/ZBE4FAvlcvo/видео.html where I picked and gutted it. In this video you see how I put it back together. have fun - it's not so difficult if you own a plug follower with a slot and a pinning shoe.
البحث في العناوين والنصوص
😅😅0😊
@@hamidhamid4100. De
Nice video, I have not seen one put back together before 😊
This will be an incredibly useful video for many many people. I’m glad you did this without a front loader too :-)
where can i get a front loader from - I have seen them in use but cant see when to buy one
Thank you mate - the front loader is great if you don't wanna gut the other side.
I found something here thinkpeterson.com/universal-top-loader-in-a-tube/
shipping to the UK is expensive - total for tool and shipping is $87.00 - can't afford that for a single tool
If I can find a similar tool for less
It was just an example, foxxxy has 3d printed it. Others have also made them themselves from sheet metal. Or maybe another commercial source has them also. Good luck.
Very interesting tutorial.
I've always wondered how the two sides were done at once.
Thank you for doing this video, cheers
Cheers mate, glad that the video was helpful.
Excuse me, where can I buy the kit I used in the repair?
Great video. I had one today that required the front loader tool because the thumbturn side was not removable (without drilling), and your spot on about those cam pieces being different designs. Definitely need to pay attention when pulling apart so you know how they go back together. Thanks for sharing!
You saved my life! I messed up with an euro cylinder like that one but now I can fix it. Thank you so so much!!
Glad the video was helpful.
❤❤❤ EXCELLENT JOB,MY FRIEND!!!THANK YOU VERY MUCH!!!❤❤❤
First time I have ever witnessed this full event! Thanks for the demo!
Haha, glad you had fun :-)
This was a great video. I'm from the US and have reassembled many locks but never the Euro cylinders. It's the part that everybody skips on the videos because it's not sexy. Thanks for publishing great content!
Thanks, glad you liked it. For me it's part of the fun to get them back together.
Great video - very useful to know how re-assemble - most videos show how to gut a lock but not how to put it back together - especially if it is a double sided euro lock
Thanks. Glad you found it useful - it's part of the fun to to get them back together ;-)
Very cool video my friend very nice fun to watch👍😊👍😊😎😎
Thanks buddy, glad you had fun watching.
Thank you for doing this video my friend. I have a full Euro now, and it's nice to see how to put one back together. I've watched other videos on how to do this, but none recently. I have all the stuff to do it, just never got around to doing a full Euro.
Thanks buddy and good luck, just give it a try. I can send you plenty of euro lock when you mess up yours ;-)
Excellent Video Sir! Very Well done! The pinning shoe really works here! thanks!
Thanks a lot - glad the video was helpful.
Very helpful. Exactly what I was looking for.
Thank you for this video and I hope to make one about built cylinder and pin &pin tumbler thank you
Thanks, I'm subscribed to get notified once you upload.
Excellent walkthrough. I've always been hesitant to gut full Euros, but you made it seem easy.
Thank you - this one was easier than the average but you need to try it yourself to gain experience ;-) It's just pieces of metal, not a piece of art ;-)
@@Potti314 alatnya yg ingin saya punya
Excellent vid. Answered all my questions. Thanks
Thanks for the kind feedback. Appreciate it.
How could you change the combo to change the lock. How would you match a new key?
i have a problem, when i removed the clamp and try to take out the plug the key got stuck in the cylinder and they both got stuck. Do i need to remove the second clamp or is my lock broken?
This was very helpful! Thank you!
What happened to the single ball bearing please?
Where did you get the plug shoe ? Very nice and small
Very cool, i have had hard time with these euro cylinders
Thanks, many other euro locks are harder because of the cylinder length and different cam mechanisms - it's part of the fun ;-)
@@Potti314 yes it is, i myself strugle a bit with my ruko's but i don't have the right tools yet, but the padlocks and mailbox cylinder's are easy
Thanks for sharing 👍
Can you make a video where you install a button or a thumb turn to a cylinder lock please
anjay makasih bang tutor nya, gajadi diomelin bokap grgr kunci pintu slek😅
Please how do I get the follower and pinning?
Hi, would you use the same method if there were a ton of security pins in there?
А как достать внутренность, если ключ не проворачивается? Возможно пин застрял.
Would you give links Where to buy a pin kit in Europe?
No lubricant ??
Very good information!!
Great video!!!
Thank you, glad that it was helpful.
I did it without any specialized tools,only a flatened spoke and grease to hold the pins.
Hi I was wondering were you got your spring holder from
Thank you for shared!
Great video, I have been struggling to pick a full Euro cylinder lock,and would like to strip it down and reassemble it ,using only the key, (without having to pick it) thanks for the information
Thank you, wonderful
Thanks for sharing.
Good job , thank you ....
Great video.
Thank you.
Woooooooooow
Very very very gooooooooood
Дуже корисні приспособи, буду знати, як зібрати сердцевину ключ-ключ. Дякую вам.
thks, good job
Hello! What kind of nipper I can use for reinstalling the clips?
With the spring steel clips it's easy ruclips.net/video/xmi3_QwoqjI/видео.html But for these bendy ones, special pliers exit. But I'm not possessing these pliers so I'm just using two small screwdriver to tighten the clip.
@@Potti314 Ok, thank you! ;)
To bad that rest of manufactures does not use spring steel c-clips. Nice work :-)
Very true; these spring steel clips are very easy to handle but most likely a few cents more expensive.
Good job
6:35 tools name pls sir
Very good tring
Verry good
super potti. du bist mir eine super hilfe.
Vielen lieben Dank. Klasse, dass ich helfen konnte.
Is this pinning shoe home made?
Where to buy? (mine is inferior...)
It's from a locksmith but they don't sell these anymore.
بسیار عالی 👏👏👏👏
very very good
amazing thank you for sharing
You're welcome - glad you stopped by.
Merci c'est bien expliqué .
6 pin repinning where you can buy
Check HUK, Sparows and Peterson.
هل البليه لها وضع ام عشوائ
Exceptionally clear and educational tutorial! I've got the locks, just need the tools, patience and a little prayer to gut them. 👍
Is the pinning shoe you used homemade? I'm curious to see if I can make something similar from my "scraps" collection. 🤔 I really need to get my hands on Dremel type tool.
Haha, don't pray too much, just try it. Old euro lock are not hard to find and are cheap. I've messed up one or two but that's part of the thrill ;-) Have a look here for a home brew pinning tool ruclips.net/video/KP-9SdKinzE/видео.html It's made from a windshield wiper blade.
nice good job
Los vidio con traducción al español 👍
Sería muy bueno
exelente tutorial hola hermano
Thank you.
@@Potti314 esa herramienta ke metes dentro del cilindro es de que medida es de 1/2 pulgada
Except the tamil lagunitas sir thanks
الترجمه تحجب الرؤيه الكامله
شكرا
شفت جنون تاع المفاتيح كيفه إديمانطي
Thanks for watching.
Nice
Thanks.
فكرت رائعة
Mantap coy
Goooood
Gooood
رائع
I would like to send you a pic and see if can give me some advice?
Как то ты легко удалил кольца-я два дня не мог и повредил корпус
فديو جميل جدا بس ياريت ترجمه عربي
فنااااان
gr8
Ini yang gua cari
I don't need to do this on my work
One of the funniest AI voice transcriptions yet - ELCA became a well-known Islamic terrorist group!
Mona Salama
Ml
Thinck
Ba bye
Haha :-)
геморрой это ослабли мышцы задницы см видео