I just finished mine today that I got for Christmas. It seriously was a great build! I have gt3 RS and the chiron makes the porsche look like nothing. My only gripe is you never see the gearbox or even the engine and the rear lit does not open. The Porsche is lighter and the body comes off the frame intact, making mods easy. The bugatti does not. It's a unibody so you better double check as you go!
At 8.22 I think you can see why the front suspension on your build doesn't spring back (as shown on your initial impressions video). The spring units are incorrectly located at the bottom connection. I think they should be one hole further outboard.
Dear Sariel, In my progress, I am at 9:57. For some reason I can’t join the part with the heat stuck on the the part with the front axle. It either bends the part where it is supposed to connect or doesn’t go on at all. PLEASE HELP ME!!
Hey Sariel, I realized that at 8:18 when you are installing the shocks, you put them 1 hole too close to the center of the car. This makes the suspension problem worse. However, when I built mine, I still had a problem with it. Im going to try to add a 3rd shock to each wheel
I was just thinking whether this was by accident or on purpose for fixing the suspension problem. But indeed, it gets worse this way. In my opinion there's too much friction in the joints. You can try replacing all the blue and black pins by beige and grey pins. Those have more clearance.
In ruclips.net/video/_FNqYz_uD6w/видео.html (your 42083 review) 24:17, the suspension does not really work under the weight of the model but I think i found the mistake you’ve done. At 8:22, the shocks are supposed to be right next to the 1/2 5beam (Example: The right side shocks’ / springs’ black part is supposed to be one more stud to the right for more springy feeling).
I'm sure this was an awesome video. Had a couple of sneak peaks at various times through the video but decided to save the experience in case I purchase this set at some point. Looks like a very tightly packed build. Thanks for the video and the Sariel video review. Hope you enjoyed your time at the launch event
Technic not making a new peice to acommodate the w shaped engine was an opportunity missed. I know that in the interveiw, they need to make as little new peices as possible, but the bugatti veyron, some bentleys, (and one audi, to my knowledge,) and other major supercars have w shaped engines. Not making a new peice specifically for the engine was a bad idea, as it could have forwarded the idea that they can work with more vehicle brands, which produce supercars and hypercars, in the future. Overall, I still don't hate the model. Simply because it is better than the porsh in every shape and form. Does anyone else agree with me? I'm open for discusssion.
I stil hope that they wil make some crazy cars like the zenvo or apollo, btw what do you think of the leakt land rover ? I really want to see a bac mono
This Model is a piece of Cake! I loved it from the start i saw it a few days ago in some leaked pics. And I'm really looking forward to make it RC too :)
When you compare this speed build and the one done by Sariel on LEGO event you will see the difference. In Billund it was built as it probably should be.
Cant wait to get the set for myself. I got the porsche back in December for my birthday so I will have to wait until December this year to get this one. RIP
That's actually scary. I know that legos costs a lot but if i were in you i would've never disassembled the sets that make you proud the most (like the kenworth trucks)
I realy do like this kit, I personally like the looks better than the porsch, but functions just arnt as good, I meen the front suspension locked itself everytime you press on it, does this happen to you? Anyway great build mate and keep up the awesome work 👍
Hey Sariel! Nice Speed Build Do you have any Plans on motorising this Set? I know it's not Intended to but I thing with your Skills in Lego building this could be a nice Video! I really enjoy your Nice Motorised Cars, Tanks, every thing!
Indeed, you would have to redesign the whole chassis. I would personally throw out the gearbox (which is pretty useless) and put two XL Motors in it's place. And I'm sure the Servo Motor will fit somewhere inbetween :)
I’m having a hard time understanding what the selector in the middle of the cabin is used for. Is activates either a red or blue gear. Anyone know? Thanks
There is no other Bugatti-licensed Technic set, so no fair basis for comparison. Given the number of pieces, the price-per-piece is actually well within average for all LEGO sets.
yes it is. no functions, not remote controlled, cant drive and only 3.6k pieces for 370€ is too much. next crane coming our will have power functions 4k+ pieces and only costs 220€, so you will be paying just the bugatti name here
Sariel's LEGO® Workshop Maybe my comment was a bit sloppily phrased. What I meant is, that you go into much more detail with all your other reviews, you analyze the sets really well, try to knock every detail of the model and always give quite a lot of criticism. Now this review was a lot shorter "content wise" and stretched with quite long shots of the model and you repeating some of the function more times than actually necessary. This makes me feel, like you quickly rushed through the review glossing over potential design failures and misshaps. I'm not saying this was on purpose, or even influenced by Lego (although it might seem like it), it could've had something to do with a lack of time, considering you had a lot to do in your life outside of RUclips recently. I just wanted to see a review, that is a lot more in-depth, like you always do. Don't take this the wrong way, I still love the stuff you put out. All of this was just sitting on my mind :).
Sorry if it feels that way. Due to my marriage and honeymoon trip I actually had just about 2 days to build the set, film it, edit and upload the review, and this is the best I could manage.
Sariel's LEGO® Workshop Ok, that's probably, why the review seemed kinda off to me. Thanks for the clarification ^^. Keep up the great content and enjoy yourself! :)
I don't think a Mustang, simply because it's more of a sports car and not a supercar (although I would consider the Chiron a hypercar). My guesses are any Ferrari, a Koenigsegg, Ford GT, or maybe the rumored mid-engine Corvette...
The gearbox itself is two separate 4 speed gearboxes, acting in series. There a mechanism that switches the second gearbox by one gear up when the first gearbox is switched 4 gears up. Therefore the total amount of positions is 4x4 is 16. However, in the second gearbox the ratio of positions 1 and 3 is equal, as wel as positions 2 and 4. Therefore the total amount of different ratios is 8. Additionally you can put the car in reverse, which totally bypasses the gearbox.
very nice build! I like to get that however I cannot afford it. I got a tone of work to finish all my 1/60 scale PG grade GUNDAM KITS when working on LEGO like this one. there is no wind shield and no windows on the side doors on the hood no window. hmmmmmmmm holes all over the main body.. However that is a great LEGO KITlets see if that can be taken to the next level install a radio control system. with head lights and tail lights working
ah, I didn't expand that out.. heh.. I did the BWE in 9 hours straight, so I know I can build this car faster.. wanna send me a set and I'll time lapse it for you.. :)
Considering, that the Chiron has 800 Pieces more than the Porsche, is 70$ more expensive and is a Bugatti, not really much more expensive.. And the price per part is normal for a Technic set.
Loving Speed Builds ! I hope to be able to build this one some day ...
Lego Technic Mastery I hope :)
Lego Technic Mastery if anyone can afford the damn thing! $470!
Lego Technic Mastery I can borrow you 20$ maybe It help you to fulfill your dream
wambo djambo Wow ? Seriously ? I'd be honored !
Lego Technic Mastery give me your paypal let me send you 20$
I love this thing! Lego has made something great!
Nice two tone paint job
ever put in a differential the wrong way around and had to put everything apart again?
Yes...
It's horrible.
Yes when i built the 4x4 crawler the orange and black one
Yes in the big crane
I have.. with the LEGO 42056 technic Porsche 911 GT3 RS set when it was completed. I had to take the whole back end apart. :(
Me too
I just finished mine today that I got for Christmas. It seriously was a great build! I have gt3 RS and the chiron makes the porsche look like nothing. My only gripe is you never see the gearbox or even the engine and the rear lit does not open. The Porsche is lighter and the body comes off the frame intact, making mods easy. The bugatti does not. It's a unibody so you better double check as you go!
At 8.22 I think you can see why the front suspension on your build doesn't spring back (as shown on your initial impressions video). The spring units are incorrectly located at the bottom connection. I think they should be one hole further outboard.
Oops - someone has spotted the error already.
This means, the initial review needs to be revised. The front suspension isn't sagging, it's wrongly built in the review.
I watched the video in 2x, it felt like to chew 5 gums
Xt_Erre same
LEGO TECHNIC IS MY LOVE
Dear Sariel,
In my progress, I am at 9:57. For some reason I can’t join the part with the heat stuck on the the part with the front axle. It either bends the part where it is supposed to connect or doesn’t go on at all. PLEASE HELP ME!!
Stage 333
I have no idea which parts you mean but you might have done a building error a few steps earlier. Go back a little and check.
Hey Sariel, I realized that at 8:18 when you are installing the shocks, you put them 1 hole too close to the center of the car. This makes the suspension problem worse. However, when I built mine, I still had a problem with it. Im going to try to add a 3rd shock to each wheel
I was just thinking whether this was by accident or on purpose for fixing the suspension problem. But indeed, it gets worse this way. In my opinion there's too much friction in the joints. You can try replacing all the blue and black pins by beige and grey pins. Those have more clearance.
In ruclips.net/video/_FNqYz_uD6w/видео.html (your 42083 review) 24:17, the suspension does not really work under the weight of the model but I think i found the mistake you’ve done. At 8:22, the shocks are supposed to be right next to the 1/2 5beam (Example: The right side shocks’ / springs’ black part is supposed to be one more stud to the right for more springy feeling).
I'm sure this was an awesome video. Had a couple of sneak peaks at various times through the video but decided to save the experience in case I purchase this set at some point. Looks like a very tightly packed build. Thanks for the video and the Sariel video review. Hope you enjoyed your time at the launch event
Technic not making a new peice to acommodate the w shaped engine was an opportunity missed. I know that in the interveiw, they need to make as little new peices as possible, but the bugatti veyron, some bentleys, (and one audi, to my knowledge,) and other major supercars have w shaped engines. Not making a new peice specifically for the engine was a bad idea, as it could have forwarded the idea that they can work with more vehicle brands, which produce supercars and hypercars, in the future. Overall, I still don't hate the model. Simply because it is better than the porsh in every shape and form.
Does anyone else agree with me? I'm open for discusssion.
I stil hope that they wil make some crazy cars like the zenvo or apollo, btw what do you think of the leakt land rover ? I really want to see a bac mono
It is amazing to look at what LEGO has evolved into.
I’m so glad to see this video, I thought it wasn’t gonna happen but I’ve never been more happy to be wrong.
This looks like an amazing model
Best car ever in LEGO Technic
OMG that was so complicated! U are awesome and i love this speedbuild.
This Model is a piece of Cake! I loved it from the start i saw it a few days ago in some leaked pics. And I'm really looking forward to make it RC too :)
Now this is cool
Nice build and also the song!
Nice car and nice build !
7hours! It'll take me more like 7 days!
Lmaooo ikr I have a lego technic Porsche 911 rsr and it has wayyyy less Pieces and it took me three days to build
on 8:18 when you mount the front dampers, would it fit to put the lower hole of the dampers one hole more next to the wheels?
Yes, I think so.
Thank you. This should make the suspension a bit harder
When you compare this speed build and the one done by Sariel on LEGO event you will see the difference. In Billund it was built as it probably should be.
Maybe, it might make the suspension harder... but it will also make it lower.
Sariel, you should do an alternate model of this next
It sucks that you cant remove the body of the car seperately like the porsche D:
Cant wait to get the set for myself. I got the porsche back in December for my birthday so I will have to wait until December this year to get this one. RIP
Sariel, is the Chiron better than you expected?
Well it's definitely better than the Porsche to me.
Sariel's LEGO® Workshop Agreed 😉
I Love your speedbuild
picked mine up today.. will go good with the GT3 RS sitting above my Monitor
Sounds cool. You should try to get some of the formula 1 cars technic released, and the le man car. I'm trying to produce a large collection myself.
Got mine yesterday and it was amazing and so fun to build.
wow that W16 engine looks cool
Takie prywatne pytanie trochę, czy twoja żona podziela twoja pasję do lego i/lub czasem coś sobie buduję?
Nie, moja żona jest normalna ;)
Ooo kolejna osoba pozytywnie zakręcona która jest Polakiem :) pozdrawiam i leci subik. Zestaw spoko, juy podjąłem decyzję o kupnie. Xd
This is much better than doing the review and build in one video. However, could you build it, then do a review?
I really would like ti build it but it's very expensive! When do you think is the best time to buy it?
I think these things are gonna sell out quick and then you'll be at the mercy of the dreaded RESELLER!
Sariel, will you make a comparison video between this and the Porsche? Maybe showing both cars' chassis as well. Would really appreciate it!
I don't have the Porsche assembled but I'll try.
Understandable. With all the lego sets you review i wonder where do you find all the space to fit them in. BTW, do you keep MOCs unassembled as well?
That's exactly my point: I keep nothing. No sets, no MOCs. Zero.
That's actually scary. I know that legos costs a lot but if i were in you i would've never disassembled the sets that make you proud the most (like the kenworth trucks)
I need some living space, not piles of stuff that's just getting dusty.
Lego technic is now so colorful!
Vladimir Valdivia yes this is quiet annoying -.-
Co do przedniego zawieszenia to może by spróbować przesunac amortyzator o jeden pin w stronę kola??
Ill get this maybe next month, last time i did the prosche 911. It took me 3 days to make it. I did wrong 2 times and had to start all over again.
can you make a speed build and review video for the set 10261?
Can't afford it.
@@searme OOF
I just got two of these the first one is done, I'm half way there on the second one!!!
I realy do like this kit, I personally like the looks better than the porsch, but functions just arnt as good, I meen the front suspension locked itself everytime you press on it, does this happen to you? Anyway great build mate and keep up the awesome work 👍
Mr Sariel, I think you could add some kind of ackermann correction ...
Hey Sariel!
Nice Speed Build
Do you have any Plans on motorising this Set?
I know it's not Intended to but I thing with your Skills in Lego building this could be a nice Video!
I really enjoy your Nice Motorised Cars, Tanks, every thing!
Freeze I don't think he can do this because in this car there isn't really spare place for motors or battery boxes..
Indeed, you would have to redesign the whole chassis. I would personally throw out the gearbox (which is pretty useless) and put two XL Motors in it's place. And I'm sure the Servo Motor will fit somewhere inbetween :)
I never said that it's going to be easy :P
Looks great. I might get one
I’m having a hard time understanding what the selector in the middle of the cabin is used for. Is activates either a red or blue gear. Anyone know? Thanks
It's a forward/reverse selector.
If you put it in ahead, it connects to the 8 speed gearbox. If you put it in reverse it connects directly to the engine.
Are the spares and replacement parts the same for all of us or is it diffferent parts???????
Same.
Depends on your skill and accuracy
Just thinkg, why there is one spare half pin in yellow circle ... oh wait that is spare rubber band
I wasn't sold on this set until I saw the build.
So excited!
I sorta want this set only because of the engine :)
Which set is the most challenging that you’ve built?
Mercedes Arocs.
Same song for 28 minutes? NEVER AGAIN SARIEL!!! ;)
the first music works really well at double speed
Glad to see that the gearbox doesn't take up the entire chassis this time!
Is it possible to build the car in LDD if i slow down the video and copy ur steps , or are some parts exclusive to this set?
Watch my review. There's a whole bunch of unique pieces.
Buying this (along with the Porsche) in the New Year
Do you believe that this set is too expensive for what it is?
I believe that "expensive" is a relative concept.
Sariel's LEGO® Workshop Well, is it expensive for what it is in comparison to other LEGO sets?
There is no other Bugatti-licensed Technic set, so no fair basis for comparison. Given the number of pieces, the price-per-piece is actually well within average for all LEGO sets.
ABSOLUTELY NOT
yes it is. no functions, not remote controlled, cant drive and only 3.6k pieces for 370€ is too much. next crane coming our will have power functions 4k+ pieces and only costs 220€, so you will be paying just the bugatti name here
Great video, by the way......
When do we get a more honest review/ detailed deconstruction of the set like you do with all the other Lego sets?
Sorry, was my review dishonest?
Sariel's LEGO® Workshop Maybe my comment was a bit sloppily phrased. What I meant is, that you go into much more detail with all your other reviews, you analyze the sets really well, try to knock every detail of the model and always give quite a lot of criticism. Now this review was a lot shorter "content wise" and stretched with quite long shots of the model and you repeating some of the function more times than actually necessary. This makes me feel, like you quickly rushed through the review glossing over potential design failures and misshaps. I'm not saying this was on purpose, or even influenced by Lego (although it might seem like it), it could've had something to do with a lack of time, considering you had a lot to do in your life outside of RUclips recently. I just wanted to see a review, that is a lot more in-depth, like you always do.
Don't take this the wrong way, I still love the stuff you put out. All of this was just sitting on my mind :).
Sorry if it feels that way. Due to my marriage and honeymoon trip I actually had just about 2 days to build the set, film it, edit and upload the review, and this is the best I could manage.
Sariel's LEGO® Workshop Ok, that's probably, why the review seemed kinda off to me. Thanks for the clarification ^^. Keep up the great content and enjoy yourself! :)
Lego is now saying this is number 2 in a series... any ideas what number 3 will be?
Could a Mustang be in the works?
walter jackson Lego has a Ferrari license, so maybe a LaFerrari. Who knows.
I think it will be a Ford or a Ferrari because Lego has the license for for that from the lego speedchampions.
i hope a mercedes amg gt r 👍
Please please please no freaking Mustang.
I don't think a Mustang, simply because it's more of a sports car and not a supercar (although I would consider the Chiron a hypercar). My guesses are any Ferrari, a Koenigsegg, Ford GT, or maybe the rumored mid-engine Corvette...
A będzie można dołożyć powerfunctions lub coś podobnego?
To klocki. Wszystko możesz dołożyć jak zrobisz odpowiednio dużo przeróbek.
racingbrick dodał buwizz w miejscu kierowcy
So does this set have 8 or 16 speeds? I see reviewers stating 16 but Lego says 8 plus reverse.
Jack Byers 8 speed, but selectable with Reverse or Forward. So its 8x2 gearbox. This is why some reviewers say 16 speed.
It's always a good idea to read the video description.
The gearbox itself is two separate 4 speed gearboxes, acting in series. There a mechanism that switches the second gearbox by one gear up when the first gearbox is switched 4 gears up. Therefore the total amount of positions is 4x4 is 16.
However, in the second gearbox the ratio of positions 1 and 3 is equal, as wel as positions 2 and 4. Therefore the total amount of different ratios is 8.
Additionally you can put the car in reverse, which totally bypasses the gearbox.
very nice build! I like to get that however I cannot afford it. I got a tone of work to finish all my 1/60 scale PG grade GUNDAM KITS when working on LEGO like this one. there is no wind shield and no windows on the side doors on the hood no window. hmmmmmmmm holes all over the main body.. However that is a great LEGO KITlets see if that can be taken to the next level install a radio control system. with head lights and tail lights working
when is your all terain crane review coming out
When I have it.
What is the name of the music ?
Perfect video
YES thank goodness for this video.
Jak oceniasz możliwość wykorzystania nowych elementów mocowania kół jako rzeczywiście działające hamulce tarczowe?
Teoretycznie można je próbować zacisnąć jakimiś gumowymi elementami.
What will be in the next year a Ford GT or Mercedes AMG
Nothing. They release these every two years, not one year.
Sariel's LEGO® Workshop because Last year was the Porsche
Probably another car from the Volkswagen AG, like the Porsche and Bugatti. Maybe an Audi r8 or Lamborghini Aventador
Jake Styne that could be
@@jakestyne3050 lamborghini it is!
How hard was it to build????
Really tuff going if you mix something up or just make a mistake , then you have to pull it apart and go back many pages in the manual(s)!
you must've been the first one to actually build this vehicle. nice
What size for this monster ?
Here: ruclips.net/video/_FNqYz_uD6w/видео.html
Thank's
I think this video is best watched at 1.5x or even 2x speed, the music is still good and otherwise it's a bit too long for my taste.
AWESOME!
Now make a rc verision?
Gdzie można kupić ten model?
Np. na stronie Lego.
ok.. but HOW LONG did it take..?
It's that number right after "Building time".
ah, I didn't expand that out.. heh..
I did the BWE in 9 hours straight, so I know I can build this car faster.. wanna send me a set and I'll time lapse it for you.. :)
Cool! Love it!
nice vid :D
OMG i buildt the same engine 2 years ago!
grey and black for the mechaanics would be perfectly fine caause you dont see it anyway when its finished
Me: What's your favorite car
Them: Bugatti Chiron
Me: I am so sorry Mclaren I tried :(
honestly it looks cools overall but it would be better if you could use it like and rc car
Ile to waży ?
Pełne pudełko 6 kilo, sam zestaw prawie 3.
Trust me im an engineer
**plays Lego technic**
After watching this, GT3 RS is way better. Anyway great piece of machinery.
I think both are very good, but hard to compare.
Whats the B Modell?
There is no B-model.
Sariel's LEGO® Workshop then I don't buy it, sorry sariel next time maybe but nice try
How is it his fault?
Jake Styne there is no fault I am sorry it's a mistake, this set can't have a B Model because it's unique
The moment i was waiting for
Now we have this in speed champions and technic, we are just missing a creator one now😉
Even in 1:1 scale
Why is the set 350 dollars but 370 euros if 370 euros is 430 dollars
ever heard of VAT rates differences in different countries/states?
i have this set
PigIlFigo32 I’m getting one
ah, yes, the missing part of the review :)
I expected it would be later sice long build time, more time to render / edit
I like the porsche's look more
I WANT ONE ITS TOO EXPENSIVE
The reason why it is expensive is because it is a LICENSED set.
Jared Kaiser and because its so big it takes 7 HOURS TO BUILD
Jared Kaiser Take a Look at the 42030 and say that again
Considering, that the Chiron has 800 Pieces more than the Porsche, is 70$ more expensive and is a Bugatti, not really much more expensive.. And the price per part is normal for a Technic set.
Your hands must be made of steel to survive all this building
This is what you need to do if you are bored
I feel like there’s one problem. It’s too short. If you’ve seen the real Bugatti Chiron than you will see that the doors are longer on the real car
Waiting for Regera
I watched the whole thing...