Beginners Guide to Primer - Using Bosny Spray Paints
HTML-код
- Опубликовано: 4 окт 2024
- Beginners Guide to Primer - Using Bosny Spray Paints
Welcome to my 2nd Paint Tutorial Video.
In this video, I'll show the basics of using Primer. Of course, the only paint I'm gonna showcase is Bosny Spray Paints.
I'm not sure if other paint brand works the same as this specific brand but if there additional information regarding that, please let me know through the comment section below
This is the kind of video I was looking for cuz I still couldn't decide what color of primer should I use. Thankyou for this wonderful video.
Thank you so much. I wanted to make more bosny tutorial videos so that i can share what i have learned in using these spray cans. Using these paints can sometimes be tricky but if done right, they can be the best easy painting method that anyone can do.
Thank you! Watched this vid and went and bought the two spray bottles right away.
So the color you get solely depends on the combination of primer and color you use 😳
Well, that was useful! Before, I thought that grey is ok enough but seems i have to plan my paint stuff
Yep that is some of my secrets to multi toning a kit (same color with different hues). Adjusting color tones can be easy in airbrush as you can adjust the mixed of your paints but when you are using bosny spray cans, you are at the mercy of the primer.you used on how your base paint will look
I got a No1007 and a No268 which is also Flat White but half the price. I haven't find out the different yet. Hope you'll test sometime.
Finally a bosny spray can tutorial
Yep, I think its time to share some of the methods i used when painting kits ☺️☺️☺️
Awesome tutorial.. Definitely very informative.
Thank you so much Sir Joe. I have access now to recording my spray painting method and hence, I can share to the community what I have learned on my journey to the world of industrial spray cans used for Gunpla painting and whatnot 😂😂.
The reason you use a primer is to make sure the paint will stick to the surface and not easily get chipped or scratched. Did you test the paint if it really bonded with the plastic? Bosny has a colorless plastic primer made to be used on plastics. Since you mentioned "model kits" in your video, I am wondering if you're really talking about "base coats" and not "primers".
Can I use primer even though I already used the paint before using primer because Iw asnt aware of adding primer first
You're A Teacher ❤❤❤❤
A very helpful content! Thanks dude!!
Youre welcome.and thank you too
Great video but i wish you also included the Flat Clear as primer. That's what i need to use kasi.
anung magandang kulay na primer sa metal ?
Bosny, sponsor this man😤
Hahaha that would be cool if they did. 😂😂😂
Thank u so much for sharing this!
Love the simple and straightforward editing haha. May I ask if I'll need to add an extra layer of flat white if I want a bright yellow finish on a black PVC?
As a beginner this was really helpful. Thanks a lot. Wish to see you spray painting kits using bosny. 😁
Thank you so much. I did spray gunpla usung bosny kits. Check for my SDEX RX782 video.
@@HyperWeaponHobby boss pwede kaya gamitin yung gundam marker sa bosny primer after maiapply?
Pede sir pero mahirap itong burahin dahil matte ang texture ng primer. Only used Gundam marker on primed texture kung sigurado lang hindi ka magkakamali
@@HyperWeaponHobby Noted sir, maraming salamat. 😁 Follow up question pala boss, pano po makakapag panel line sa painted part? Diba kasi ang gamit na primer is flat, wala naman po bang kaso yun kahit na flat primer ang gamit tas papatungan ng ibang color? Pwede pa din po bang makapag panel line ng maayos?
Kung ang primer ay papatungan mo din ng ibang kulay then okay lang mag panel line, kaso pag pinatungan mo ng ibang kulay ang primer, baka mawala din ung panel line unless talagang light lang ung pag patong mo at black ung panel line. Usually, mas maganda pang panel line sa mga painted parts ang Tamiya Accent. Mas madali syang burahin kahit lightyer fluid lang ang gamit mo pambura. Kung gusto mo talagang gamitin ang Gundam Marker then at least mapatungan mo man lang ng gloss ang ipapanel line mo para madaling burahin ang gundam marker pag nagkamali ka
Like ko yung flourescent fit sya sa lahat at makintab..
For how many minutes before it dries in a plastic bottles?
thx will be buying flourescent for general use
Hi, sana mapansin rrepaint ko sana mannequin ko, bosny primer grey then top coat bosny ivory? Puro second coat gagawin ko tama po kaya gagawin ko. Thank you in advance 🙂
Basically, white primer is good for very bright color, while black is good for dark and/or metallic color (bcs it kinda look metallic for me) while grey is balanced between these two
What do you think?
You are correct and it is exactly as you said. It is the general correlation between undercoats and basecoats for most paints. By your explanation alone, I think youre already an experience painter ☺️☺️☺️
Hello po, sakto tong video para mag repaint ng roofrack ko na kupas, kung mag paint po ako tapos matte balck gusto ko, anong primer po kaya ang maganda? Thabk you🎉, saka baka po may suggestion po kayo magandang paint remover hehe
Pag matte black, pede na jan ang primer grey para maganda ang tone ng black, for paint remover, meron nabibili na nakalata na B228 all purpose bosny paint remover, madali lang sya gamitin
@@HyperWeaponHobby thank you po sa reply ☺️, Godbless
@gilbertaragon4415 no problem, glad to help ☺️
So can i use them for priming my dnd miniatures?
Pwede sa plastic like acrylic
If i will repaint my motorcycle fairings, for black fairings i have to use black primer first then black base for the final coating, am i right sir? I hope you notice this one, thanks in advance.
Google is so dumb at giving me answers. Does Bosny Primer function also as filler primer?
is this apliccable to any plastic like warhammer 40k mini
Hi, I got a question. I have some spray paint caps of tamiya lying around. My question is that can I use those caps and put them on Bosny spray cans?
Sir, question 1: what if gundam markers or dispiae markers ginamit pang change color sa parts, need paba i-primer muna? 2: what if ndi ka nga ng primer pero nag top coat ka naman sa final, mag lalast po ba ung gundam or dispiae marker?
Cant say too much about bosny and gundam marker. Ung gundam markers kasi ay masyadong manipis, okay lang din naman kung gamitin mo ito ng walang primer pero pag tinopcoat mo ito ng bosny primer, usually parang natutunaw sya. Masyadong matapang kasi ang bosny. Tinutunaw nito ang mga manipis na paint
@@HyperWeaponHobby sir pano if ung flat clear na bosny ung pang top coat? Ndi naman kaya nya tutunawin ung gundam marker na inapply ko?
Siguro manipis na topcoat lang, pag napakapal ay matutunaw ung gundam marker at concentrated masyado ang chemical ng bosny. Pang mga sasakyan at bike na paint kasi un
@@HyperWeaponHobby appreciate the responses, sir! maraming salamat sa mga insights, napakahelpful sa newbies 🙂
And appreciate ko din sir ang feedback sa mga videos. I am always in the mindset of continuous improvement and open lagi sa Gundam related contents na makakatulonh sa mga gundam communities natin ☺️☺️☺️
Sir gawaan mo nga po ng video yung bosny primer white.. manaka pagsabi po kac sakin hindi daw primer yun.. salamat
Ang primer ay usually Flat Paint lang naman kahit anong kulay pa yan. Mag dedepende kasi ang basecoat mo depenede sa kulay ng primer na ginamit mo o anung kulay nung plastic na pipinturahan mo. Rough ang texture ng mga flat paint para madaling mag adhere ang basecoat at matakpan din nito ang mga uneveven surfaces.
thank you so much sir
hello sir im planning to use bosny on my gunpla kit. would using primer give me a better result?thank you
Hi boss few question:
1. If the gunpla parts that I want to pain is already white do I need to prime it?
2. What is the price range of bosny and I hear their are fake bosny in palengke will fake bosny affect the quality or damage the model kit?
3. Can we also use tire marker pens on gunpla?
4. Where are you from boss?
Hi, i use the tire marker pens and they kinda work similarly with gundam markers but the gundam markers definitely has better results
Some bosny cans have prices ranging from 83 to 90 to around 105+ pesos
Well these are a few good questions so here are my answers
1. If the gunpla parts is white do you need to prime it. For me it really depends, if i want to keep it white then I will still prime it but if I want to change its color then my decision will definitely change, if I want to make.it into a different metallic or glossy colors then i would take and different approach that will not conventionally need to prime it. In short, it really depends but if you watch the video, let's say the plastic spoon represents the white parts, i have a sample there of what it would look like if you paint it with or without a primer.
2. Bosny price range differs depending where you get them but usually i get them on bicycle and motorcycle stores ay around P90 to P120 and they are more cheaper if you try to get them online. Yep i have heard of fake bosny but I have not encountered on getting one of it
3. Regarding tire markers for gunpla, i have not actually tried it but you gave me an idea for a new content 😅😅😅
4. Im from the Southern Province of Luzon
And primer grey and coated with white?
That would work
Is it ok to use different brand for color coating
How to obtain pearl white? Can I use primer grey, white base coat, then pearl white and clear coat for final?
For white paint as your main coat, i will suggest using flat black or just black. Black primers are best for white or even pearl white
pag acrylic magaspang talaga ?
Hi. Can I use this primer then airbrush with paint?
What if I ordered online and they sent a fake Bosny Primer? Have you tried a fake Bosny Primer before and are they useable? I'm repainting a mechanical keyboard base.
Only buy from credible sources, even online, you can tell sellers that srlss legitimate product through the number star and product solds. I usually tend to check first bad review by the customer and will decide wether I will buy from that shop. In regards to fake bosny, I havent encountered one I mean i know what a regular bosny feels like, from its tin can, its nozzle, its logo, the quality of its paint and so on. If ever I gotten my hands on a fakr bosny, that would definitely by a good material for content to uploaded here
Is this applicable to Marvel Legends figures?
Any tips to avoid orange peel/rough paint textures?
Sand the surface of the object you are trying to paint. Use a primer, Perform multiple coating of your base paint with slight coat for every interval. Let it dry before next coating and ensure you are spraying with a significant distance. Lastly, always shake the spray can for every coat
Spray evenly thin coats... Wet sand rough surfaces before spraying final coat
@lyleangelotv8397 exactly, although I never did wet sanding in the video, but its a good additional process to ensure we achieve good result
Is it good for plastic?
Flat black primers are easy to peel off? I tried that on ABS figures and they tend to peel off.
Mmm, I havent experienced that yet. I usually make sure primed parts are cured before applying the base coat. I do experience paint chipping when posing kits due to parts rubbing each other therefore paints are.chipped and peel off, but never experience any paint to peel off on their own
Thank you. I will try with Bosny primers again. Keep it up! Brother
@@HyperWeaponHobby
@chadguts600 thank you so much too, definitely gonna bring mote bosny tutorial and I hope I could see your work if you managed to porceed with your topcoating
Sir pwede b yan i repaint s fairings ng motor,, hndi b yan mabakbak or masira pgnainitan?
Kelangan i-strip yung paint ng fairings, lihain ng maayos until wala na ung kulay nya at smooth na rin na sya, gumamit muna ng primer, spray ang basecoat and then gumamit ng topcoat. Mahirap ng mabakbak yan pag tama ang proseso na ginawa nyo sa pagpintura ng fairings
any sanding work needed before painting model?
Yes, sanding would definitely improve the surface of the plastic when it comes adhesiveness of your primer. But one should be patience when they do this as progressive sanding may take time but the result is far better than a not sanded plastic
Hello boss, how long do you wait for the primer to dry before painting it?
Im not sure about other paints but for bosny, around 10 minutes of drying for primers is good enough
@@HyperWeaponHobby 10 minutes then is it already good enough to put a mask on it?
@Matt-ll8pc for flat primers (flat white flat grey flat black etc) yes 10 minutes is good enough. Masking tape do not adhere too much on flat/ matte surfaces. But for regular bosny paints that will act as your basecoat or simply your main coat, i usually let it cure for a day before masking it.
Is it okay if i did is first is the primer grey and second is black?
That's good combination as the black would adhere better with a primer and its darkness would be more distinct as you use a grey primer
sir do you top coat your gunpla before priming? thanks
After priming sir
Sir tutorial naman pano yung gun metal sa bosny
Noted sir. Coming right up sa next content ko. Gunmetal using bosny ☺️☺️☺️
how do you apply the paints thin paints layer by layer?or can it be thick layer of paints applied?
Thin paints layer by layer and dry it vua hairdryer every coat
@@HyperWeaponHobby just stripped the part of its paint..reapplying soon..will try this..thank you!!
Good luck, hopes everything work out with your project
is white one is really a primer like primer grey?
It doesn't actually say "primer white", but technically, primer in paint terms is the first coat you use before applying the base coat. They're usually flat paint for the base coat to adhere properly and it may also affect the color result of your base coat (dark primers = darker base coat, light primers = lighter base coat etc..)
@@HyperWeaponHobby Is this primer gray a normal acrylic paint color name? Or is this a primer like plastic primer, epoxy primer?
I want like some kind of plastic primer for my bike's kits. Can I use Bosny primer grey as a plastic primer for long lasting paint?
Unfortunately Bosny Primers are just paint primers, not epoxy primers. Regular Bosny paints are acrylic laquer with a few exemption of some enamel paint. If you want a plastic primer or an epoxy-like ones, you should consider the Bosny Plastic Primer Spray which is intended for vehicles
Pano yung metallic green sa bosny sir?
Gagamit ka muna ng undercoat na silver, or aluminum silver or bisny chrome, tapos spray mo ng honda green (transparent green) magmumukha ng metallic un ☺️☺️
Can i use this spray colour on wood?
Suggest me spray colour for my diy guitar.
You can use this on wood as well. Just make sure you have sand the wood to a smooth texture. Apply primer, basecoat and of course a shiny gloss topcoat. Now for your DIY guitar, it depends on your color preference but if I were to paint one, I will paint it with multiple blue. A combination of river blue, blue and tivoli blue would do for me since blue is my favorite color
Sir gano ba kalayo mag spray? Akin kasi nawala na yung mga details naging flat na hahaha.
At okay po bang magpaint/primer na nasa runner pa ang mga parts? Bibili sana kasi ako ng wing fenice ng huiyan at gagawin kong wing gundam wala nga lang shield. At okay po bang wag na i top coat after ipaint?
Pag bosny dapat at least 1 feet or 12 cm ang layo, masyadong makapal ang pintura ng bosny pag malapit ang spray. Pwede nman ispray kahit nasa runners pa kaso ung gatemarks o ung pinagputulan na plastic ay ciguradong magiging issue, kung undergated okay lang at di nman makikita pero kalimitan sa mga HG ay hindi undergated. Si Huiyan wing fenice ay hindi undergated. Pag Bosny mas mukha pa rin astig pag natopcoat
@@HyperWeaponHobby salamat sa pagreply. First time ko kasi magpaint ng model kit. Hahaha. Pero ayos lang pag walang primer? Palgi kasin maulan sa amin
Pede nman mag paint ng bosny kahit walang primer. Mas maganda lang ang adhesive ng paint kung may primer. Kung may hairblower ka nman pede, ka magpaint kahit maulan, un lang talagang gagamitin mo lang ung hairblower para mapatuyo mo ung paint
@@HyperWeaponHobby ay mali po natype ko. Top coat dapat. Hahaha. Mga next month ko sana itatop coat pagkatapos kong ma paint? Okay lang po ba?
Kung hindi ka gagamit ng hairblower para patuyuin mo ung topcoat, then dapat talaga sobrang init ng panahon bago ka mag topcoat
Hello po I have a question lang po ulit. Plan ko po kasi pinturahan yung keyboard ko. Texture po siya magaspang. Balak ko po sana wet sanding lang and rekta beige color na ako and flat coat. Magwowork po ba siya or gamitan ko po ng primer? Tight budget po kasi ako eh baka may masuggest po kayo
Additional info po Incase of getting a help, white po yung board ko just painting it beige
I suggest to use a flat white as your primer para lalong maganda ang kapit ng beige, mejo glossy na kasi yung beige at maganda kung magamitan ng primer para maganda ang pagla basecoat and after that, saka.mo gamitan ng flat topcoat. Although iniisip ko lang, pano mo sya lalagyan ng letters after ng painting?
@@HyperWeaponHobby Yung pinaka base lang po ng keyboard yung kukulayan ko po yung keycaps po is hindi kasali. Thank you so much po ulit for your help. Mukhang need ko bumili ng flat white
Okay ung base lang pala ng keyboard. I suggest sand it first with 800 grit, then 1000 grit and 2000 grit of sand paper, mura lang din un sa ace hardware para maganda ung surface bago lapatan ng primer, and then saka mo spray ng beige and the flat coat. Okay ang result nun if done right
@@HyperWeaponHobby Sorry late reply po hindi nagnotif yung reply mo po. Parating pa lang po yung Bosny Spray Paints na inorder ko po kaya di pa ako nakakapag start kaya thank you po about the sanding part buti nabasa ko po agad. Balitaan ko po kayo if natapos ko na po. Wish me luck po hahaha
can i use this on a watch?
Sure, i can see no problem with that
Huhu fake ata nabili kong bosny spray paint primer gray. Gagana kaya at kakapit yung top coat 🥲
😅 hindi ko alam pibagkaiba ng fake sa orig. Usually, sa mga hardware store lang ako nabili ng bosny. Dapat pala makahanapako ng fake para maikumpara ko 😅
Hello po nice video! Bale if tama po pagkakaintindi ko, primer then paint then top coat right?
Pwede po ba yung bosny no. 190 clear na pang top coat? At ilang layers po needed para sa top coat if ever thank you
Thank you po. Yes po pede pang topcoat bosny 190. Mga 2 to 3 layers na coating sa tamaang distance ng pag iispray
@@HyperWeaponHobby Copy po. Yung sa primer po ilang layers need nya? Same with the base color ilang layers po usually needed?
And gano po katagal ung iintayin kada apply ng layers? Thank you!
Sa priner usually isang layer lang ginagamit ko. Ung base color, it depends, pero usually 1 to 2 layers lang ang gawa ko dahil makapal ang bosny paint pag dinamihan mo ang spray. Gumagamit ako ng hairblower para mabilis ko mapatuyo ung paint usually binoblow ko ung paint ng around 1 to 2 minutes bago ko patungan ulet. Kelangan mo itouch ung paint kung dry na bago ulet patungan
@@HyperWeaponHobby Ok got it! Assume ko pati yung primer at top coat ginagamitan mo din ng blower?
Exactly, mas mabilis kasi pag may blower, kelangan kasi ma exposed sa dry air ng kahit anong bosny paint as soon as possible na ito ay kumapit na sa surface. Kaya kahit umuulan ay nakakapag paint at top coat pa rin ako 🤣🤣🤣
Spraying would have much greater results if sprayed properly. It's good you make different results on types of prime featured but the way it sprayed it's too much close made quality poor that would make huge difference if properly sprayed.
Lamat lodi
Imagine if bosny decided to make hobby grade paints after they found out that their regular paints are being used in scale models
It's very unlikely for them 😂. Scale model hobby is a niche while their product is already positioned in industrial and mainstream uses which have more market demand
Is it okay to use bosny spray paint in motorcycle hub?
Pang motor, bisekleta at mga sasakyang talaga sir ang bosny. ☺️
@@HyperWeaponHobby nag english pako nakita ko kasi sa comment english lahat😅
@@HyperWeaponHobby pwede ba sa hub ang bosny sir? Sabi kasi ng iba natatanggal daw kapag nag init na sa preno
Okay lang haha, pag may nag comment ng english, sasagutin ko ng english pag may nag commrnt ng tagalog, sagutin ko din ng tagalog 🤣🤣
Meron sir na Bosny High Temp/ High Heat Paint na kung ang surface na pipinturahan mo ay laging maiinitan, pede nmang ung bosny na un ang gamitin. Hindi ko lang ginagamit sa Gundam un dahil hindi nman naiinitan ung mga Gundam haha. Anyways, mejo may presyo ng konti ung mga Bosny High Temp paint kumpara sa regular bosny