WOW... what a lot of work... and when I think how some "bipeds" think that 50 dollars for something like this is too much... well, let them do this work or choose some "ruiner" to do it free for him...respect for your work, patience and video presentation..BIG LIKE and SUBSCRIBE
@@FixTronics My respect for the video lessons that you are kind enough to show on YT.. I thank you from the bottom of my heart for your answer.. in my country (Romania, S-E Europe), plagiarists of higher education institutions (after 12th grade high school) are more appreciated ..they are the future decision-making factors on the economy, children from primary schools, retired parents (with poverty pensions, a maximum of 400 dollars, apart from "special pensioners" from the institutions of the Romanian state's forces (judges, policemen, the church, civil servants, senators and members of parliament, etc.) who collect income from special pensions from a minimum of 1,500 dollars to 5,500 dollars (classic case of a retired policeman at 48 with a pension of 5,250 dollars (equivalent in Romanian lei)... this is so that you know in which country I live, who do not earn more than 400 dollars every month, in the field of IT (programming and technical maintenance of computing)... the intelligence and the "mafia" in Romania do not allow me to take advantage of following my qualification after graduating from higher education, if I am not registered in a political party (PSD, PNL, USR, UDMR, etc).. for this reason, I follow, on YT, everything that I cannot find as technical information , to the problems I face, for me at home... you are an important "source" for me, to improve my theoretical and practical skills and patience and attention, so necessary in this field... thank you for your help and I promise to watch as many of the video posts on your YT channel as possible...my respect and good health, Dan
I having the same problem on my brother 7020 but I don't have anyway to test the traces and I would like to know what I should do and if the traces can break over time or is this somthing that has to come from factory
This voltage is actually a ldo voltage in which the super IO is pulled up to. The same line that goes to the super IO goes to the power button which is used to pull down the voltage to GND. If the Super IO is shorted you will not see that voltage at the power button as the super IO consumes and converts that voltage into heat
Resp Sir! Very Nice Class Sir. Sir My Dell Optiplex 3050 PN:VJ4OT Motherboard CPU was Ram 1.2V Ok But CPU, VTT, Graphic Voltages Not in Sir. Orange Light Blinking Sir. Fan Continue Moved Sir. and 4Pin Connection Removed Fan Run Sir, Hwere the Problem Sir. Please Advise Sir, Iam Waiting for Mesege Sir. Sir Iam Telugu Sir. Please Sir. -- ChinnaRao Paderu Andhrapradesh
Hi friend Try and replace the RAM module at first i it still then you might have a problem with the bios or in worst case scenario you may have a faulty CPU Don't forget to check VCCSA also..
Very impressive in knowledge and perseverance!
WOW... what a lot of work... and when I think how some "bipeds" think that 50 dollars for something like this is too much... well, let them do this work or choose some "ruiner" to do it free for him...respect for your work, patience and video presentation..BIG LIKE and SUBSCRIBE
Thank you so much brother
I really appreciate it
@@FixTronics My respect for the video lessons that you are kind enough to show on YT.. I thank you from the bottom of my heart for your answer.. in my country (Romania, S-E Europe), plagiarists of higher education institutions (after 12th grade high school) are more appreciated ..they are the future decision-making factors on the economy, children from primary schools, retired parents (with poverty pensions, a maximum of 400 dollars, apart from "special pensioners" from the institutions of the Romanian state's forces (judges, policemen, the church, civil servants, senators and members of parliament, etc.) who collect income from special pensions from a minimum of 1,500 dollars to 5,500 dollars (classic case of a retired policeman at 48 with a pension of 5,250 dollars (equivalent in Romanian lei)... this is so that you know in which country I live, who do not earn more than 400 dollars every month, in the field of IT (programming and technical maintenance of computing)... the intelligence and the "mafia" in Romania do not allow me to take advantage of following my qualification after graduating from higher education, if I am not registered in a political party (PSD, PNL, USR, UDMR, etc).. for this reason, I follow, on YT, everything that I cannot find as technical information , to the problems I face, for me at home... you are an important "source" for me, to improve my theoretical and practical skills and patience and attention, so necessary in this field... thank you for your help and I promise to watch as many of the video posts on your YT channel as possible...my respect and good health, Dan
I am having the same issue. I learned a lot. Thank you.
So how did you solve it
Your explanation is marvelous ! Thanks for this video 👍👆🙏🙏🇮🇳
Wow this one of most useful video thanks brother keep going 💐
Thank you so much brother
Good JOB "hard work never fails"
Thanks brother
Great work 🎉🎉
Wow, I have learnt something. Thank you very much
Thanks mate
Amazing job 🎉
Awesome video. May I know what the blue light does?
Its ultraviolet light to cure the solder mask
I have this exact model but it starting itself on startup. How can I fix it? What are voltages of the 1pin power connector
I having the same problem on my brother 7020 but I don't have anyway to test the traces and I would like to know what I should do and if the traces can break over time or is this somthing that has to come from factory
Good job , very interesting
Thanks brother
good job
The voltage in the pin of the front panel is going to the IO or is coming from the IO
This voltage is actually a ldo voltage in which the super IO is pulled up to.
The same line that goes to the super IO goes to the power button which is used to pull down the voltage to GND.
If the Super IO is shorted you will not see that voltage at the power button as the super IO consumes and converts that voltage into heat
I feel this happiness wow
😊⚘️
Resp Sir! Very Nice Class Sir. Sir My Dell Optiplex 3050 PN:VJ4OT Motherboard CPU was Ram 1.2V Ok But CPU, VTT, Graphic Voltages Not in Sir. Orange Light Blinking Sir. Fan Continue Moved Sir. and 4Pin Connection Removed Fan Run Sir, Hwere the Problem Sir. Please Advise Sir, Iam Waiting for Mesege Sir. Sir Iam Telugu Sir. Please Sir. -- ChinnaRao Paderu Andhrapradesh
Hi friend
Try and replace the RAM module at first i it still then you might have a problem with the bios or in worst case scenario you may have a faulty CPU
Don't forget to check VCCSA also..
nice
In My case the IO not generating the 3v for switching..
Good job
Thanks mate
hello freind good job , i need bios dump 4mb , dell optilplex 360 series
Hi friend
I don't think I have that one
But have a look at this link
t.me/biosarchive/10218
@@FixTronics thanks you freind
You welcome brother