Good tip Thanks! Is the sensor using all 4 wires, That's why 2 are bridged together? I usually just put a resister in place of what I'm testing and see if the code goes away.
Hey, The cushion sensor uses 2 wires. The other 2 wires are for the seat side airbag. I did not use a resistor because I don't have a known good value of that circuit. Couldn't compare with driver side because tge sensor does not exist there, also Couldn't find any value in SI or live data.
👍 INTELLECTUAL Dallas Auto Diag My Mentor Dallas Auto Diag Take care and have a great weekend with all your family around you INTELLECTUAL Dallas Auto Diag From Nick Ayivor from London England UK 🇬🇧 ⏰️ 22:54pm Good Evening
Hello boss ihave problem with 2016 audi a1 faultcode c104b29 and u101700 ican trying to clear faultcode is clear but when I drive the car that faultcode is come back again please tell about for battery voltage when ignition switch is on voltage 12.25 but when engine is strat voltage show me 12.93 can this voltage is perfect and that also atuo transmission I mean dsg gearbox
Good information thanks for sharing 👍👍👍
Thanks
Good tip Thanks! Is the sensor using all 4 wires, That's why 2 are bridged together? I usually just put a resister in place of what I'm testing and see if the code goes away.
Hey, The cushion sensor uses 2 wires. The other 2 wires are for the seat side airbag. I did not use a resistor because I don't have a known good value of that circuit. Couldn't compare with driver side because tge sensor does not exist there, also Couldn't find any value in SI or live data.
@@DallasAutoDiag So how is it possible to have a circuit with the pins touching? Is it only when its disconnected?
@Advanced Level Diagnostics
That's exactly what I did not understand.
@@advancedleveldiagnostics it's also not shown on the diagram.
@@DallasAutoDiag Hmm.. I don't see a lot of Subaru's, I wonder if it somehow separates them when it's plugged in...
عاشت ايدك عالمعلومة ... تحياتي متابع جديد الك
وايدك اشكرك
اخوية شلون اكدر اتواصل وياك عندك واتس اب تلكرام بس اريد اسئلك على شغله وما اخذ من وقتك دقايق فقط ... تحياتي
دافتح محل جديد وداوصي شغلات امن امزون ممكن تنصحني بشغلات زينه ومفيدة بشغلنه واكون ممنون منك ... تحياتي
@mohanad ibraheem facebook dallas auto diag
👍
INTELLECTUAL Dallas Auto Diag
My Mentor Dallas Auto Diag
Take care and have a great weekend with all your family around you
INTELLECTUAL Dallas Auto Diag
From Nick Ayivor from London England UK 🇬🇧 ⏰️ 22:54pm Good Evening
Thanks Nick
Hello boss ihave problem with 2016 audi a1 faultcode c104b29 and u101700 ican trying to clear faultcode is clear but when I drive the car that faultcode is come back again please tell about for battery voltage when ignition switch is on voltage 12.25 but when engine is strat voltage show me 12.93 can this voltage is perfect and that also atuo transmission I mean dsg gearbox
This is a whole case study. Not sure on top of my head