Hi guys, great video. It saved me a lot of time and fiddling around. Everything worked great. The printer is running again. Many greetings from Germany.
Can I check with you are the little white pads that the print heads rest above (seen at 21:42seconds) meant to be hard? I have just cleaned everything and worried they might have hardened with age and are originally soft? Also thanks for the video it was really helpful
Estou tentando instalar bulkink nela com uma placa codificadora, ela está pedindo a troca dos cabeçotes, comprei na China os cabeçotes remanufaturados, mas na hora da substituição ela faz o cancelamento no meio do processo, acusando "cancelamento de substituição de cabeçote", sabe como posso resolver?
Can someone please tell me what tool is used at 3:50 to undo the 2 screws that hold the service station to the carriage rod. I have tried with a hex allen key, but they will not undo, they are very tight it seems. I have a Z5200, but I assume the screws are the same. Please help, thanks.
Use standard Allen Key set to open They are difficult to open with an opening click that you should hear when opening for the first time.good Luck Friend Call on WhatsApp +213 779440567 for any help you need.
@@wideformathelpwfh7192 Hi, just wanted to let you know I managed to remove the 2 screws. They were very tight but I used a T8 Allen key and managed to do it.
when he puts the cover back on there is nowhere where he puts the one screw in the back in.Does that go back in or no? At 3:28 of the video. unlock the chariot (carriage) free.
الحرفة هي مهنة تتطلب نوعًا خاصًا من العمالة الماهرة.في النطاق التاريخي، وخاصة فيما يتعلق بفترة العصور الوسطى وما قبلها، عادة ما كان ينطبق هذا المصطلح على الأشخاص الذين يعملون في إنتاج البضائع على نطاق ضيق. وفي هذه الأيام، استبدلت المصطلحات التقليدية الرجل الحرفي والمرأة الحرفية في كثير من الأحيان بمصطلح الحرفي ونادرًا ما تستبدل بمصطلح الشخص
Thanks for the most helpful video. Solved most of my problems but one: I had to completely disassemble the service station and now am unable to find anything on how to reinstall all the tubes. Does anyone have any schematics for this or any idea where I could find some (designjet t790 btw). Thanks in advance
Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Check that the Trailing Cable is not damaged. • Check that the Trailing Cable is correctly connected to the Carriage PCA, Interconnect PCA and Main PCA. • Replace the Carriage PCA
Hi friend, good morning. my hp T920 plotter activated the option of refilling ink tubes and now it is asking me for a new head. Will I have any option to reset that option and not ask me for a new head?
Hi friend when hpT920 ask for new print , that mean there's problem to refill ink in print head so there's tear on the air membrane or that of the ink compartment it should be repaired here is my WhatsApp contact me to show you how to repair. +213779440567
Hi Friend thanks for whatching m'y vidéos de quais urubus você está falando não entendi a sua pergunta para a estação lavo todos os resíduos de tinta com água da torneira para os cabeçotes prefiro minha própria preparação de mistura de álcool 70⁰ + limpador de para-brisa com amônia + uso de solvente de tinta (inktec).
Well, this video fixed my service station error, but I now have a mysterious paper jam error where there was none before. I’m ready to throw this thing away :(
@@wideformathelpwfh7192 the paper jam error happens once the carriage runs both ways and comes down and stops over the service station then you here two clicks from the middle of the printer and then nothing and then the error pops up.
Hola tienes que comprobar el cable conector de la estación Envíeme un mensaje de error de imagen y conexión a la estación para intentar ayudarlo moussabdelhamid@gmail.com O WhatsApp +213779440567.
Sorry to be late to answer System Error 02.1:10 The printer has detected a possible fault relating to the Carriage PCA. (The carriage PCA contains electronics that control how and when the ink is dropped from each printhead. ... Turn the printer ON and see if the error has gone. If it has gone then you could have a faulty printhead. Also you have to check the trailing Cable
Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. Service engineer: 1. Check the cabling coming from the power supply to the Engine PCA 2. Check the fan of PSU. 3. Replace the PSU. For more help contact on WhatsApp please. +213779440567
Hi guys, great video. It saved me a lot of time and fiddling around. Everything worked great. The printer is running again. Many greetings from Germany.
Thank you ❤️ for comment
if you see that we deserve a donation make it.
@@wideformathelpwfh7192 I had thought about it right from the start. Unfortunately, Paypal does not accept my location as I am not based in the USA.
Braboo san3a rae3a lah ijazik balkhayr ala had amal kayim
Tabark lahe 3alik ou 3ala tari9a Bach tawsal charh
ماشاء الله عليك اخي الكريم ،بالتوفيق في مشوارك العملي والنجاح في قناتك.
Best video on how to do this so far.
Superb Video mate. Youve saved me a few hundred AUD right here!
Thanks for comment I deserve a donation ☺️
Can I check with you are the little white pads that the print heads rest above (seen at 21:42seconds) meant to be hard? I have just cleaned everything and worried they might have hardened with age and are originally soft? Also thanks for the video it was really helpful
They are originally hard don't worry
You're welcome my friend
I Will be happy if you can help my chanel with modest donation.
Will do :)@@wideformathelpwfh7192
Vielen Dank, das Video hat mir sehr geholfen!
Sie sind willkommen, es ist mir eine Freude, Ihnen zu helfen, mein Freund
it's the same for me. Thanks, I now have support to regenerate at my company
You're welcome
دائما متألق
Tack så jättemycket för video
Estou tentando instalar bulkink nela com uma placa codificadora, ela está pedindo a troca dos cabeçotes, comprei na China os cabeçotes remanufaturados, mas na hora da substituição ela faz o cancelamento no meio do processo, acusando "cancelamento de substituição de cabeçote", sabe como posso resolver?
عمل جميل يستحق التشجيع احسنت النشر بالتوفيق انشاء الله
Can someone please tell me what tool is used at 3:50 to undo the 2 screws that hold the service station to the carriage rod. I have tried with a hex allen key, but they will not undo, they are very tight it seems. I have a Z5200, but I assume the screws are the same. Please help, thanks.
Use standard Allen Key set to open They are difficult to open with an opening click that you should hear when opening for the first time.good Luck Friend
Call on WhatsApp +213 779440567 for any help you need.
@@wideformathelpwfh7192 Hi, just wanted to let you know I managed to remove the 2 screws. They were very tight but I used a T8 Allen key and managed to do it.
ما شاء الله عليك الله يعاونك اخي
فيديو مفيد شكرا على الشرح المبسط والواضح
Your videos were very nice. It helped me a lot. Thank you!! Nice person
Thanks 🙏 you are welcome
جزاك الله خيرا على هذه المعلومة
when he puts the cover back on there is nowhere where he puts the one screw in the back in.Does that go back in or no? At 3:28 of the video. unlock the chariot (carriage) free.
شكرا على المعلومات والشرح الواضح
ماشاء الله عليك يا أخي الكريم رائع
تبارك الله عليك اختي الكريم
دروس قيمة وفيها افادة
الحرفة هي مهنة تتطلب نوعًا خاصًا من العمالة الماهرة.في النطاق التاريخي، وخاصة فيما يتعلق بفترة العصور الوسطى وما قبلها، عادة ما كان ينطبق هذا المصطلح على الأشخاص الذين يعملون في إنتاج البضائع على نطاق ضيق. وفي هذه الأيام، استبدلت المصطلحات التقليدية الرجل الحرفي والمرأة الحرفية في كثير من الأحيان بمصطلح الحرفي ونادرًا ما تستبدل بمصطلح الشخص
Magnifico video explicativo.
Thank you Brother you are wellcome
تبارك الله عليك وعلى هاد الشرح الواضح
Thanks for the most helpful video. Solved most of my problems but one: I had to completely disassemble the service station and now am unable to find anything on how to reinstall all the tubes. Does anyone have any schematics for this or any idea where I could find some (designjet t790 btw). Thanks in advance
Sorry to be late you have to check carefully my video to reinstall the rubes
أحسنت ، عمل جيد ومُفيد
جميل جدااا مشاألله ابداع
ماشاء الله عليك متمكن
Hello, I would like to know if it is the same code 02.1.10 in the model hp t2300 ?
Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Check that the Trailing Cable is not damaged. • Check that the Trailing Cable is correctly connected to the Carriage PCA, Interconnect PCA and Main PCA. • Replace the Carriage PCA
شرح رائع ومبسط مشكووور
Vravou 3lik
Hi friend, good morning. my hp T920 plotter activated the option of refilling ink tubes and now it is asking me for a new head. Will I have any option to reset that option and not ask me for a new head?
Hi friend when hpT920 ask for new print , that mean there's problem to refill ink in print head so there's tear on the air membrane or that of the ink compartment it should be repaired here is my WhatsApp contact me to show you how to repair.
+213779440567
Amazing video thank you! I cleaned and serviced the Service Station of a HP Z2100 following along :-)
You are wellcome
Você lava com água mesmo ou algum outro produto nos bicos?
Hi Friend thanks for whatching
m'y vidéos
de quais urubus você está falando
não entendi a sua pergunta
para a estação lavo todos os resíduos de tinta com água da torneira
para os cabeçotes prefiro minha própria preparação de mistura de álcool 70⁰ + limpador de para-brisa com amônia + uso de solvente de tinta (inktec).
الله يعطيك صحه اخي الفاضل
شكرا اخي تصليح ممتاز
thank you it was so helpful
worked it exactly like u but keep getting error 21.1.10
Check it carefully the motor fonctionnement and contact câbles
Contact me on WhatsApp
+213 779440567
شكرا لك على هذه المعلومات القيمة والشرح المبسط
i have Hp dj T790, it has constant beeping sound and it's very annoying Do you have any information about this subject?
Sorry to be late contact me on WhatsApp to try helping you
+213 779440567
Well, this video fixed my service station error, but I now have a mysterious paper jam error where there was none before. I’m ready to throw this thing away :(
No it's a good plotter you can fix the paper jam just with some oil on the spring of media sensor
You can call me on WhatsApp +213779440567 to any help you need
@@wideformathelpwfh7192 the paper jam error happens once the carriage runs both ways and comes down and stops over the service station then you here two clicks from the middle of the printer and then nothing and then the error pops up.
Please send me a video on WhatsApp
Nice 👏👏
Bravo aalik
Good job bro ✊ 👍👏🤗
hello, i have the error 21:13, you think is the same ? thanks...
Yes my friend same problem of service station.
معلومة مفيدة جزاك الله خيراً
Mycket trevlig och användbar video
محترف ربنا يعينك
بالتوفيق ان شاء الله
دروس مفيدة شكرا
Yo tengo el problema del 21:13 cambié la estacion de servicio como dice el manual y sigue el problema. :(
Hola
tienes que comprobar el cable conector de la estación
Envíeme un mensaje de error de imagen y conexión a la estación para intentar ayudarlo
moussabdelhamid@gmail.com
O WhatsApp +213779440567.
شكرا أخي على هذا العمل
Good job 👍
شرح رائع ومفهوم
شرح وادح ومفهوم شكرا لك
great video well done
Thank you friend ☺️
bravo alik
تقنيات عالية شكرا
الله يبارك ما شاء الله
ماشاء الله تبارك
ماشاءالله عليك
عمل رائع الله يوفق
Bravo topp
Excelente
Thank you ❤️😊
عمل جيد وفقك الله
Alguém pode me dizer como fazer o reset da estação de serviço da HP designjet t1100ps
que yo sepa, no hay descanso para la estación de servicio HP, solo hay descanso en valores unsine tolale
Sorry my friend but you to Access in diagnosic menu to reset the service station please contact me on my WhatsApp for more help.
Is that Error 21:10 the same as 02.1:10?
Sorry to be late to answer
System Error 02.1:10
The printer has detected a possible fault relating to the Carriage PCA. (The carriage PCA contains electronics that control how and when the ink is dropped from each printhead. ... Turn the printer ON and see if the error has gone. If it has gone then you could have a faulty printhead.
Also you have to check the trailing Cable
ما شاء الله عليك
عمل جيد و مضبوط.
thank you
You are welcome 🤗
Merhabalar. 03.10 hatası verdi. Fan değiştim düzelmedi. Yardımcı olabilir misiniz. Türkiye den yazıyorum.
Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer. Service engineer:
1. Check the cabling coming from the power supply to the Engine PCA
2. Check the fan of PSU.
3. Replace the PSU.
For more help contact on WhatsApp please.
+213779440567
عمل جميل وفقك الله
rawoooa wa jamil jedan
Good job bro 👍👏
Nice job 👍
Tbarklah
good working
Thanks 🙏
Thanks helped
You are wellcome
Bra gjort och enastående
Anyone know exactly what kind of grease he's using?
Hi Friend use SKF NLG2 general use Grease
Hp design jet t1100ps
ERROR: 08:11
plz solution.
Hello sorry to be late you have to check the formater card ( HDD, All connectors)
عمل جيد
Muy bien
Bravo
top
Thank you so much
روعه
Bravoo
رووووووعة وجميلة جدا
Excelente proceso
Muchas gracias mi hermano
10:04 bad idea XD
@@musicaparaoficinaestudio yes thanks
I hope that's not the only thing you might have seen in my videos.
@@wideformathelpwfh7192 it was just a joke. Be cool
تبارك الله عليك اختي الكريمة
شكرا على المعلومات والشرح الواضح
Thank you so much
Muy bien
Good job 👍👏