Samsung FlexWash drain pump replacement (dc31-00178d)
HTML-код
- Опубликовано: 7 сен 2024
- Call us today with you model number and we will make sure you get the right part
888-655-8569
In most cases we can get you the part the next day if ordered before 4pm central time.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Donations are appreciated as well you can donate here - www.paypal.me/...
Drain pump - amzn.to/304F6qB
This video shows you how to replace the drain pump on the Samsung Flex zone washer. The bigger washer underneath though. Not the drain pump for the flex zone washer itself.
First you have to take off the control panel to get tot he rest of the washer. You do not have to take off the flex zone washer to get the the drain pump on this model. Once you get the control panel off you can take off the front to access the drain pump. Video shows you all of this. Good luck to you!
Like and Subscribe!
You are awesome, thank you! My husband and I were able to complete this repair in about 1.5 hours while watching the video. Saved us a ton of money! It is definitely a 2-person job if you’re not a pro. For the part where you have to unscrew the screws on the bottom of the washer, we don’t have one of those fancy 90 degree screwdrivers. So my husband tilted the washer back while I quickly stuck 2 pieces of firewood underneath to hold it back at a tilt. It was then very easy to unscrew those 2 screws using a regular screwdriver. Just be careful to lower it slowly on the way down!
We also found it helpful to label the screws as we were removing them so it was easier to find them again during reassembly
Couple points. This dude is awesome. Anything I say is simply to help.
So I'm not sure why this brilliant man suggested in the video saying some steps were tricky yet the hardest part, the spring gasket, was butter for him. Just take care where he suggests.
The pump cap is easy. On the right cap side is a huge tab. Jam a screw driver and pry up...pops off.
You can use the other screw holes for the pump. They planned on this thing stripping the plastic. Don't use a drill to take em out or put back...
Put the door back in the bottom gave and tilt it back all the way without closing to get the lock back on. Remember the gasket is off so u have a lot of room to work the lock back.
The spring can go in any position. I looped from bottom and then put spring in 10:00 position.
Mine had a huge hair wad at the impeller blocking the pipe. I put the new part he linked and it works better
Thank you. I have a customer I have to replace the boot and it's a similar flex wash model. Had no idea how to take it apart when I saw I could just side the top off haha. Thank you for the informative video.
Thanks so much for this. Really appreciate the video and explanation. Swapped out my pump this weekend and it’s now good as new.
Thank you for sharing. I was able to fix our washer. Wife is happy 😊
is the latest revision part # for this drain pump currently "DC31-00187A" ? As I notice the part number in the title of your video shows the original oem part number, but most of the replacement offerings are the one I mentioned.
Thanks,
Thank you hoping this will fix the water leaking issue of my machine
I got a 1SC error code which indicated it was the top washer drain pump which was a headache to get to but i did it however after replacing it i still got the same code after running a test cycle. At this point I don't know what else to do or look for.any suggestions would be highly appreciated!!
Great tutorial. Thanks again
thank you soooooooo much man...you saved me some money 💰...thanks again
If the washer is leaking just a little when it pumps out would you just replace the entire housing along with the pumps or will the pump leak through the shaft and out the back?
you should try installing a lid lock switch on that Mini top washer there... thats is a very big job. a lot to remove to switch out that lock... Haha...
Can you make a video on what to do if the smaller washer on the top doesn’t drain? Thank you for the info on the main washer btw
I cannot find the parts. My problem is with both washer and dryer not powering on
This was very informative.
Are the generic version of the Samsung OEM pump (DC31-00054D) okay to use? They cost less than 1/2 of the Samsung OEM? Please advise.
Thank you
Just so you know: i always install water like 1 or more gallons in a 5 gallon bucket before installing that front panel to see if i have a leak on a hose. never do i install that front panel before adding at least 1 gallon of water... just say`n ...
Have a Samsung front load that started failing to spin on heavier loads. I cleaned the drain pump access and found a little cracked piece of Grey plastic. Since the washer works with lite to mod loads but not a few towels (won't complete the spin/ keeps adding time) is it possible one if the fins broke off the impeller? Unsure why it works sometimes then not with a few 3-4 towels load. Samsung support is zero help. Tub has no wobble and unit is newly balanced perfectly.
I have a samsung front load washer. I have checked the pump and every drain hose, no issues found. However, it will not drain mid cycle, only on spin only. What might be the problem?
The best tool to used is a plastic puller that want scratch the panel and put it on the front and it would just pull out. These Flex washer are tricky. I'm a appliance technician
Is the drain pump the same for the 2017 first model? This washer looks newer. Mine just went out
What if the drain pump is good but the washer still doesn't drain?
I had the same issue. I checked further for any clogs in the black hose and found some baby socks and a toy. I still went ahead and changed the motor after I removed the stuff causing the clog.
Good morning sir.
I have an identical washer. Model wv55m9600avv5.
It rarely turns on and when it finally does turn on lights start flashing and it shows 18:88 on the display alternating between the wash time.
Could you please assist as to what board will needs to be replaced.
No much info on the internet about those washers or that particular issue.
Any help will be greatly appreciated.
Thanks
Wish I could help my friend. That’s something I would have to call Samsung about. I would recommend calling a Samsung authorized servicer to help out with that. I wish you luck though.
@@BeardedApplianceRepair problem was solved, display pcb replaced.
Michael Jorrin awesome! Thanks for teaching me something! If I run into these out in the field I’ll know what to suspect. Thanks for the update!
Hi. I have a Samsung Flexwash model WV55M9600AW/A5. The upper tub's lock lid handle broke. I spoke to Sears parts direct and they stated I had to change the washer tub ring assembly (Part #Part #DC97-20036B). How do I go about dissembling/assembling the upper unit to replace that part?
Hey i have a question i have the samsung flex washer and i just notice the softener didn’t drain and there was still a little bit of water in the tumbler any suggestions? Thanks
Ok I changed drain pump and it still sounds the same I can hear something running but no water coming in or going out. Now what
I ain't putting those screws back at the bottom front face, I guarrrrrooonteeee you that!
Lol it may make noises afterwards. That just a maybe. It may not for the next 20 years too lol. Just making you aware and I understand if you don’t put them in.
Have you made a video showing how to replace the upper drain pump?
Hi, have you replaced it? I met the same problem.
8:50
I have the same model but in black my top washer is not drain in do you have a video on how to replace the top drain pump washer thanks
My bottom washer drains fine it’s the upper not draining do they have to drain pumps or only one
They have separate drain pump. For working an that I believe you have to remove the top washer to work on it. It’s a total pain. Will probably take you an hour or more just to get to it. Have a nice long weekend to figure this thing out. If you need call someone I completely understand but labor will be expensive in it. Samsung didn’t help out when it comes to repairing this unit. It’s Really hard to do anything right underneath the top washer. Good luck!
@@BeardedApplianceRepair
Good morning do you have a video on how to replace the top washer drain pump on this model thanks
4c error... Show my machine.
What's problem???
Please solution this error
hola helpme how to change drive motor sansung flex dyer DVG60M9900V/A3 /???
Thanks for your videos u make my life much easier