dude, the bushings in the control arms wear out over time ... by 80-100k miles, you will need to replace them or get wobble in the front end... it is a common issue with the WK2
cheaper to have them replace the control arms than just the bushings ... you can see the amount of labor for the bushings ... when you replace the arms (that come with new bushings) ... they drop the old arm off, place the new one in ...
حبيبي شغل ايدينا تقريبا ناخذ ٢٠٠ الف ... لكن سعرها متفاوت يعني كلمن بكيفه ... اكو ناس جابوها ب ٢٢ ورقه الشكل الجديد و قسم جابوعا حتى ب ٧ ورقات ... احنه مموجوده عدنا ما اعرف سعرها بالضبط
A bushing is only 40 to 70 bucks a control arm is about 180 to 250, if it was a couple of bucks then yea I could see the reason for the whole control arm
@@DoubleDutchrutter reason is it is much easier to replace the control arm quickly than to take it off, press the old bushing out, etc. unless you have your own shop or setup in a garage. It's that simple.
Fantastic video. Thank you Sir!
you welcome sir ... thank you for watching ... do not forget to subscribe to my channel ❤️🔧👍🏻
This gentleman here he's very good at what he does.
Thank you for your video.Where are you located?
you welcome sir ... im in iraq - baghda city ... thank you for watching ... do not forget to subscribe to my channel ❤️🔧👍🏻
Nice job, how much is should pay for labour for doing this job?
30$
Nice job. What is the main reason for this problem in lower arm.
yes sir ... thank you for watching ... do not forget to subscribe to my channel ❤️🔧👍🏻
dude, the bushings in the control arms wear out over time ... by 80-100k miles, you will need to replace them or get wobble in the front end... it is a common issue with the WK2
Are the upper control arms the same for a 2020 and 2015
yas sir its same 👍🏼
Anyone notice the other side. The entire hub and caliper assembly is just hanging by the brake hose.
Thank you for note 👍🏻😔
what is the part number of that bushings plesse
sorry i dont know . ... thank you for watching ... do not forget to subscribe to my channel ❤️🔧👍🏻
cheaper to have them replace the control arms than just the bushings ... you can see the amount of labor for the bushings ... when you replace the arms (that come with new bushings) ... they drop the old arm off, place the new one in ...
فرممه جيب المنيوم شكد سعرهة بدون زحمه ؟
حبيبي شغل ايدينا تقريبا ناخذ ٢٠٠ الف ... لكن سعرها متفاوت يعني كلمن بكيفه ... اكو ناس جابوها ب ٢٢ ورقه الشكل الجديد و قسم جابوعا حتى ب ٧ ورقات ... احنه مموجوده عدنا ما اعرف سعرها بالضبط
Congratulations their is 2 more
I am delighted you like my video ... thank you sir ❤️🔧👍🏻
it's cheaper to just buy a set of control arms and replace them ... a lot more work to do the bushings only
Yes sir you are right .. but we are in Iraq prices are very high fot set control arms 😒$
@@ALI_FIX12 wish I could send you a set of donors :/
thank you sir ❤️❤️❤️
A bushing is only 40 to 70 bucks a control arm is about 180 to 250, if it was a couple of bucks then yea I could see the reason for the whole control arm
@@DoubleDutchrutter reason is it is much easier to replace the control arm quickly than to take it off, press the old bushing out, etc. unless you have your own shop or setup in a garage. It's that simple.