Great video, fixed my goal zero yeti 500x that wasn’t charging. Thank you, super simple just unplug the battery for 30 seconds replug it in and it’s good again.
Fantastic... just got a new one, refused to charge out the box... thought I was gonna have to return it which I didn't really want to since it was a really good limited time deal. Tried your solution and 2 minutes later it's fixed and charging! Ideal. As another poster says, no need to remove bottom screws, just the top 4 bolts is fine. So quick and easy! Thanks!
Worked for me! I have a brand new yeti 500X off the shelf that wouldn’t charge. Stupidly, I waited until the night before my camping trip to take it out of the box and charge it up. This was quick and worked great. Thank you!!
I had the same issue out of the box. I just pressed and held down the "Units-Light-Info" buttons (At the same time while plugged in to the wall) for a few seconds and started taking a charge shortly after. I think if the battery if fully drained for a period of time the BMS needs to be reset to start charging. The 3 finger reset worked on my Yeti 1000x so there was no need to pull the case apart.
I might have to give this a try. My 8mm input charge is not working. When plugged in the light will be solid blue. I have been charging my 500x with USB-C cable.
@@ElectronicNoobBlog It did not work. I let my Goal Zero go to 0%. Disconnected and reconnected the red and black cables. Connected the 8mm power cable that came with my Goal Zero, solid blue, no charge.
Sadly did not work for me. The ! logo still shows on the screen, then the input slowly drops from 35 Watts down to 0 and then stays at 0 with an occasional 2 seconds up to 5/10 Watts and then back to 0. Dead battery?
I have the 1400 and I had to flip it upside down get the cables disconnected at the battery let it sit for a few minutes and reattach. Also solar charged it to wake it up then all was fine. Should run these down to 20% or so every few months just to cycle it.
Great video, fixed my goal zero yeti 500x that wasn’t charging. Thank you, super simple just unplug the battery for 30 seconds replug it in and it’s good again.
Glad it helped!
Fantastic... just got a new one, refused to charge out the box... thought I was gonna have to return it which I didn't really want to since it was a really good limited time deal. Tried your solution and 2 minutes later it's fixed and charging! Ideal.
As another poster says, no need to remove bottom screws, just the top 4 bolts is fine. So quick and easy! Thanks!
Glad You get it up and running!
Worked for me!
I have a brand new yeti 500X off the shelf that wouldn’t charge. Stupidly, I waited until the night before my camping trip to take it out of the box and charge it up. This was quick and worked great.
Thank you!!
Glad it helped! Hope You will have great time with it!
I had the same issue out of the box. I just pressed and held down the "Units-Light-Info" buttons (At the same time while plugged in to the wall) for a few seconds and started taking a charge shortly after. I think if the battery if fully drained for a period of time the BMS needs to be reset to start charging. The 3 finger reset worked on my Yeti 1000x so there was no need to pull the case apart.
Thank you for your great work, I really appreciate it
That worked for me after letting by battery go to 0. Thanks!
You are welcome!
Thanks, it worked! But the small screws don't need to be removed. 🙂 Maybe Yeti 500X Reset helps aswell: Press and hold the units and info button.
Thank u that worked perfectly 🙏
You're welcome!
Thank you! ❤
I might have to give this a try. My 8mm input charge is not working. When plugged in the light will be solid blue. I have been charging my 500x with USB-C cable.
I'm afraid it might be something else mine also did not accept charge via usb-c. Let me and other people know how it went and did it fix issue.
@@ElectronicNoobBlog It did not work. I let my Goal Zero go to 0%. Disconnected and reconnected the red and black cables. Connected the 8mm power cable that came with my Goal Zero, solid blue, no charge.
@@harrelsennez Not good, sound like some sort of problem around MPPT circuitry, what about rear port 8mm?
Do you know how to change fuse for AC inverter of where is it?
It would be extremely helpful if you can tell me.
Thanks for the video, Is very interesting content for me😊❤.
Glad you enjoyed it!
Great video. Thank you!
Glad you liked it!
Any idea what cells they are? are i know they NMC li-ion. The pack looks like 3S9P.. can you confirm?
Sadly did not work for me. The ! logo still shows on the screen, then the input slowly drops from 35 Watts down to 0 and then stays at 0 with an occasional 2 seconds up to 5/10 Watts and then back to 0.
Dead battery?
Maybe it's discharged too deep - try measure voltage on that battery connector.
@@ElectronicNoobBlog Can you do a video on using external power supply to raise charge so controller can read it please
this just happening to me as well. recently moved and had it in storage. after taking it out wouldn't work. did you figure out a fix?
@@lawllipops13 Sadly not. I scrapped it in the end and bought a new one. I figured it's life lifespan had expired.
do you have suggestions for same issue with a yeti 1000
Sadly I do not have Yeti 1000. You can try open it and see if there is easy access for disconnect. Maybe it will work.
I have the 1400 and I had to flip it upside down get the cables disconnected at the battery let it sit for a few minutes and reattach. Also solar charged it to wake it up then all was fine. Should run these down to 20% or so every few months just to cycle it.
Thank you for your great work, I really appreciate it