If the fender brackets are along the side of the fendor similar to mine it should work, However, they are a bit tall above the bolt hole and I have the backrest so I had to grind the tops down so they would clear/sit in the correct position.
I'm guessing that the steel bar stock is 1" X 1/4" X length? I made a set out of aluminum stock with back bracing for a set of heritage saddlebags. Did you use locktite in the bolt holes?
Yes, 1 1/4, you don't need Loctite for the bolts, the brackets are threaded so once you tighten them and put the bolt on them backing up only makes them tighter because of the opposing thread directions. Still gives a bit of wiggle so my last resort is likely get the harley brackets and pay a welder to shape them to fit my bike.
really just depends on how the side fender covers are, I found that they will fit just about any bike. Some have weird angles on the side fenders but for the most part they should work.
Wad up brother. I finally got mine on...... but..... my bike is lowered and my custom fender sits lower as well . So with everything lower my right side bag is only about 2 - 2.5 inches above the exhaust. Haven't been out for a test ride yet to see if it melts . What do you think, should I be worried????
@@freefree2021 thank you brotha. Trying to do it some justice and having it rolling since it’s been forever since working on them. I’ll dig around for that video you suggested
I got a solution to your bag shimmy if you haven’t found one yet. Im getting ready to do mine since i seen this video of yours. When i get home on my down hitch from work ill be videoing it and tag you on my video.
Might want to add a nice size washer between the bolthead and bag so it spreads the pressure out so it doesn't want to crack the bag. Good vid bud!
Yea, i seen that while putting them back on. I'm still debating installing the liners.
Thank you for posting this, I've been trying to figure out a way to put Harley bags on my vtx and this is a great solution
New subber......looking to do this to my vulcan 1700 classic and this gave me some ideas.....thanks and ride safe
Appreciate the video, you have the best video explaining the process 👍🏾👍🏾
Where is the video about the signals on the harley style bag? I'm interested in what kind they are.
@swoo5117 just realized i never did a vid on the lights, coming soon, I'll also put the link below.
I have the same bags but using the Harley brackets
I tried that too but they would not flow through the bottom of the bag properly and then none of the holes lined up.
Wondering if this would work for my Vulcan 900?
If the fender brackets are along the side of the fendor similar to mine it should work, However, they are a bit tall above the bolt hole and I have the backrest so I had to grind the tops down so they would clear/sit in the correct position.
@@freefree2021 ok I will give it a try
They work on my bike 🙏🏾 came out really nice thanks!!
I'm guessing that the steel bar stock is 1" X 1/4" X length? I made a set out of aluminum stock with back bracing for a set of heritage saddlebags. Did you use locktite in the bolt holes?
Yes, 1 1/4, you don't need Loctite for the bolts, the brackets are threaded so once you tighten them and put the bolt on them backing up only makes them tighter because of the opposing thread directions. Still gives a bit of wiggle so my last resort is likely get the harley brackets and pay a welder to shape them to fit my bike.
Where'd you get those brackets? I wonder if those will fit my Suzuki Boulevard C90T?
really just depends on how the side fender covers are, I found that they will fit just about any bike. Some have weird angles on the side fenders but for the most part they should work.
Did you get them Installed ?
Where can I get those brackets?
www.ebay.com/itm/221766594083?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YCZaUi8zQay&sssrc=4429486&ssuid=Z--bAOCQTO2&var=&widget_ver=artemis&media=COPY
Send a link for the bags
@leemathis551 The description has the link at the bottom..
Where can I get the lights?
The clear LED taillight is from Ebay/Amazon and the turn signals are just aftermarket flowing LED turn signals from Ebay.
How are the brackets doing long term?
Great so far!
Wad up brother. I finally got mine on...... but..... my bike is lowered and my custom fender sits lower as well . So with everything lower my right side bag is only about 2 - 2.5 inches above the exhaust. Haven't been out for a test ride yet to see if it melts . What do you think, should I be worried????
No worries at all, Jeffs road glide sits about an inch or less from his bags, and no melting. Mine are like 4.5 inches away.
Would this apply to 1300 VTX models? Seems like the same setup across but it’s been awhile looking at them
Absolutely, i actually used these very mounts on my 1300, check out my video prepping from sturgis, same bolts and everything.
@@freefree2021 thank you brotha. Trying to do it some justice and having it rolling since it’s been forever since working on them. I’ll dig around for that video you suggested
@@RubiconDONN its the "universal saddlebags" video,
Thanks
I got a solution to your bag shimmy if you haven’t found one yet. Im getting ready to do mine since i seen this video of yours. When i get home on my down hitch from work ill be videoing it and tag you on my video.
Please let me know when that video posts for sure.