Hello Nick, Use a criss cross pattern and tighten then until you feel confident that they won’t come loose. Be careful you don’t over tighten and strip out the threads.
Terry Watkins just under the clutch basket it the shift rod. I think if your shifter is stuck that’s probably not installed right. Look at the 1:42 make on this video to see it. You should be able to shift the gears by moving that up and down. If not that’s your issue.
I just bought a 03 warrior the top end was redone and all new clutches clutch basket and so on plus cable. I tried going for a ride this morning and I start it up hold the clutch lever in shift to first and let go the clutch lever and it doesnt move at all and the engine doesn't even shut off. Any idea what is going on
Subbed.
Thanks
Man I really appreciate it
@@RCBGarage no problem! Just acquired a warrior of my own. Put some vids up on my channel as well. Good work!
If you don’t have a torque wrench what’s the best way to set the bolts ?
Hello Nick, Use a criss cross pattern and tighten then until you feel confident that they won’t come loose. Be careful you don’t over tighten and strip out the threads.
I have a question. I recently replaced the clutch and now it’s stuck in gear any recommendations on what it could be?
I'm not sure how it would be stuck in gear can you give me more information?
The shifter is stuck it wont allow mr to do anything. I replaced the head and the cylinder, the clutch aswell.
Thanks for replying. I know the gears are good I soaked the clutches overnight aswell
Terry Watkins just under the clutch basket it the shift rod. I think if your shifter is stuck that’s probably not installed right. Look at the 1:42 make on this video to see it. You should be able to shift the gears by moving that up and down. If not that’s your issue.
I just bought a 03 warrior the top end was redone and all new clutches clutch basket and so on plus cable. I tried going for a ride this morning and I start it up hold the clutch lever in shift to first and let go the clutch lever and it doesnt move at all and the engine doesn't even shut off. Any idea what is going on