What is the thickness of the impeller plate and I presume the diameter is 1 inch. Is the rod is of steel one or shall we use cycle spokes having 2mm thickness for it. Very good project and it makes me to attempt in making. One suggestion the end cap at the back of motor and the piece connecting it with the motor mount cap should be provided with small holes for air inlet to cool the motor. Kudos. keep it up and post such DIYs.
cool design.. would ya be able to put a elbow and hose on the discharge and use it to pump water from a water jug up to a fish tank .. about 3 feet lift??
Nice Project... Thank you... I'll try to make it... Actually I want to make a powerfull water pump for bike washing...could you tell me pls...witch motor will be Best for using my project?
u need to add one extra fan on top from same motor for cooling , or it will burn in regular use . usually all pumps have that ventilation design or are submersible for 24hour use .
Very very nice project. Kia yeh project 1/2 inch pipe me possible he aur is size me PVC pipe cap mil jaien ge. Mujeh yeh pump drinking water bottle 19 littre k leye banana he. So Plz reply must.
Nothing special it is simple soldering, you may first clean any dirt using sandpaper from surfaces, the surfaces should be shiny enough to properly conduct heat when soldering is applied, preheat surfaces and then apply soldering, it will work in same manner of soldering between impeller and rod as showed in video.
Lucas Marinho im imagining not plastics like to melt in fuel so they would need to be fuel safe the the issue of the motor in fuel a cars fuel pump would be better i would think
I am concerned about the risk of fire ou explosion, i have a few pumps but they work with a magnet to produce movement, the dc motor isolated like the video would have any risk of producing a spark or coming in contact with the fluid whatsoever?
Very good performance.
Thanks
Tenkiu pak somad udah bikin video tutorial hou tu make dinamo
How to use in deepwell water pump 9mts. Below the ground
Very nice
I am from Odessa. Good work bro.
Fine work. Thanks
muy bueno¡¡¡¡
solo le agregaria un buje en la parte inferior para prevenir desgaste.
I like it and i love you
Veri veri nice and Thanks
нет бы шило взять,нет надо саморезом кернить ))
In winter it is very cool🌬⛄⛄🌬⛄❄❄
Mian Ahmad hhhhh
Super bro.......Nice
What is the thickness of the impeller plate and I presume the diameter is 1 inch. Is the rod is of steel one or shall we use cycle spokes having 2mm thickness for it. Very good project and it makes me to attempt in making. One suggestion the end cap at the back of motor and the piece connecting it with the motor mount cap should be provided with small holes for air inlet to cool the motor. Kudos. keep it up and post such DIYs.
hello brother 👋👋😊😊
u should install 1 more fan at the output then its called "powerful" btw nice job
999
O9
9o999oo99999oo9o
Good work bro
Good
cool design.. would ya be able to put a elbow and hose on the discharge and use it to pump water from a water jug up to a fish tank .. about 3 feet lift??
Yes water can be pumped up easily more than 3 feet.
Cool project but won't the motor need to breathe
Amazing
Vvvvvvvvvery nice video
Can we use this to transfer diesel?
Nice project, but one small issue: the motor is not ventilated, and at some point it will burn. Overall, a good familly project as well.
You can find perfect idea for that on Avasva Solutions.
Can you please give me the building Plan for these very nice high volume pump? PLEASE PS: i'm Sorry iam German my english is pretty bad. SORRY
👌👌👌
When you take off this two rotors it must be better
Perfect, simple, genial. Thank you
Kreatif si mas ni.. main k e rmh más
Very nice. Can you please make one for me.
Nice Project... Thank you... I'll try to make it... Actually I want to make a powerfull water pump for bike washing...could you tell me pls...witch motor will be Best for using my project?
Two years later still no answer...
Great Dear!!! How can you solder still with steel ? is it possible ?
thank you for youe replay !
.
Please make a list of parts used in this project. It may be more helpful for others.
Kishan Kumar did you get the list of parts for water pump?
u need to add one extra fan on top from same motor for cooling , or it will burn in regular use . usually all pumps have that ventilation design or are submersible for 24hour use .
Can I increase length of pipe or the same lenght does it works if I increase pipes length and rod length as usual
good job..thank's
moja🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌
nice it's good water pump 😍😍😍😍😍😘
Thanks
Nabeel Nasir 9
Nabeel
Nasir
Very very nice project. Kia yeh project 1/2 inch pipe me possible he aur is size me PVC pipe cap mil jaien ge. Mujeh yeh pump drinking water bottle 19 littre k leye banana he. So Plz reply must.
Yes ye possible hai 1/2 inch mai or 1/2 inch k end cap b easily miljatay hai.
Neha Nawaz
Anu pong tawag sa fittings na ginamit sa pagdugtong ng rod
What iron to use this merk part....
Mast this a pump moter gejet
Ye electric pe chalegi kya
C'est un travail qui propre ,mais je veut savoir combien de mettre Cubs par heure cela peut faire
Abdoulaye Sane very good
What is the metal used for making fan ?
Thanks
What porbos of tall pipe it should be short
Perfectly made but not perfect performance
Sir Pani to nahi khich Raha hai
rất hay nhưng hơi khó
Si encapsula el motor.....entonces como se va a enfriar?????😑
Bhai Mera motar 12v ki battery par bhi slow chal raha hai please reply me
Ho good
Kya hota agar 3 impller laga dete
What kind of soldering is that i tried with usual soldering but it is not working
Nothing special it is simple soldering, you may first clean any dirt using sandpaper from surfaces, the surfaces should be shiny enough to properly conduct heat when soldering is applied, preheat surfaces and then apply soldering, it will work in same manner of soldering between impeller and rod as showed in video.
It would be wise to use a lead-free solder for use with water.
bhai aap iss moter ko sale kyu nahi karte ho kya rate lagega iska bolo plsss
45 rs ka h
kaha se milega
I need this water pump
SERIAS TAN AMABLE DE DECIR QUE CAPACIDAD ES EL MOTOR, CLARO HABLANDO DE LOS DE 12 VOLTS, Y CUANTOS REVOLUCIONES POR MINUTO.......
Hight kihne meter ?
can you make a PVC helix auger?
Ok👌👍👍👍
kaisa laga
30 ft ka pipe lagane ke lia kea kotha hai
you can make air cooler
is that what you call "HIGH PRESSURE PUMP"? Cmon.. define high pressure
Please I would like to order one.
😲😲😲😲😲😲
Can you list the parts used?
can we use this for petrol transfer
size of pipe please?
how rpm????whay W ?
Mini car make video
Hi bro yanaku etha water pump venum pro
What is the rpm of motor??
Uska kya Naam haiapp bana rahe hain us motor ka Kitna dam hai
Supet
rahulkumaryadav
How much of cost totally
Under 10 dollar.
Puri kharch Kitna aayega
Can you tell me about the motor you are using.
Its 545 dc motor.
My Projects Lab tq
you can you come back with a big fan from Malaysia and Thailand tel me
Can it pump motor oil with a stronger motor
Yes it can but some drop in pressure.
Can it be used with fuel? Is it safe?
Lucas Marinho im imagining not plastics like to melt in fuel so they would need to be fuel safe the the issue of the motor in fuel a cars fuel pump would be better i would think
I am concerned about the risk of fire ou explosion, i have a few pumps but they work with a magnet to produce movement, the dc motor isolated like the video would have any risk of producing a spark or coming in contact with the fluid whatsoever?
How to flug tenol
Hay
Your tub price is 540
vikash
Y si funciona
de que pueden ser los motores
di beli boleh
you can buy one on ebay for $8..12v mini pump 500gph. why even bother ?
Tataskychannel
😅😅😅😅😅😅😅😅😅😅😅😅😅
kem Bnavvo
120528
Bhai ye niche ka mat green Wala ye kha se liye hai
Online available at aliexpress.
Kuchh kam ka nahi .bekar pump.
Frod
Fake time pass
Very nice
Very nice