Dude you're too intelligent to not have subscribers by now. Everybody give this man some love. Out here making unicorn 🦄 screws man. Never have I ever seen such a unique phrase for a tool 😂
And on that note I just subscribed. I do not believe I have seen this channel before. It just appeared in my short videos and I am intrigued with this project. When someone makes this type of recommendation it usually means something. Thank you.
@@Erebus.666.no trust me, ive used one of these wood splitters and that works perfectly fine. Altough you have to make sure the wood is not hitting anything fragile, like the lines, but that i think we both know😂
@@verteupyes. But it shatters really quick when it cannot make a continuous cut. You probably waste inserts for $50 just to cut into that hardened spiral. Better use a grinder when you don't have a customer paying for your consumables...
To everyone wondering why, I think the audio sounds bad because something is covering the mic, probably his hand, it’s a pretty easy mistake to make if you’re recording on a phone
To everyone wondering what it is, it splits wood.
Thanks dood was wondering that that was for
I thought robot wars had gone up several levels...
thats what SHE said
What was it before?
The before tool was a reamer for electrical conduit.
This audio made me feel like I was just shooting without hearing protection
The audio is terrible I have no idea why this video is getting so many views lol its definitely not my best one.
@@HughsllcThe adio makes it more immersive! Lol.
@@jed-henrywitkowski6470 I literally have no idea why this video out of 400 some better videos has over a million views makes no sense 😑
I think he’s got water deep in the mic, or he really f’d it up somehow
@@Siph_Maned_Wolf My finger slipped over it cause I was holding the phone lol. I still have no idea why the algorithm loves this video.
Audio went back to 2002 for a second
Time warp
@@HughsllcI was hoping it was because you were wearing a respirator
Machining the face sounded like Fred Flintstone's twinkle toes bowling technique
omg yes! thats exactly the sound it reminded me of but couldn't remember where it was from!!!
😂😂😂😂
Man. I hate to see an old reamer destroyed (I'm a pipe fitter) but I'm invested.
I'm not a huge fan of wrecking tools but this is like the 9th one I've seen at the scrapyard.
My dad has one like that and I’ve used it as a plumber/welder. It is a shame as it looked in good enough condition.
@@Hughsllcit’s just the nostalgia hitting
@@AB-these-handles-are-stupidwhat does it do? Found one in my uncles abandoned house
@@ianallard5453
It’s for reaming black iron pipe
For mine is the drill that will pierce the heavens!!!
There we go ! 😀
Was looking for this exact comment 😂
Yeah bro,Simon is the greatest
Don't belive in yourself. Belive in me!
🤣🤣🤣🤣🤣Твоё сверло да небеса 😆🤣ты смешон 🤣🤣🤣🤣🤣 спряч своего карлика себе в задний проход, не позорься😆
Mans building his own giga drill
Ever seen The Puppetmaster ? That tool brings back scary memories
Hell yeah dude
Hell yeah dude
Dude you're too intelligent to not have subscribers by now. Everybody give this man some love. Out here making unicorn 🦄 screws man. Never have I ever seen such a unique phrase for a tool 😂
Hey thank you 😊 this whole thing has been really fun.
And on that note I just subscribed. I do not believe I have seen this channel before. It just appeared in my short videos and I am intrigued with this project.
When someone makes this type of recommendation it usually means something. Thank you.
@@Hughsllc we are friends now. now tell me how to get in touch with you so we can start brainpicking
@@Hughsllc but for real though...
@@stygianindustries8295 @hughsllc on all the platforms ✨️
I love seeing people using good old fashioned ingenuity!! I don't know what it's for but machining is cool!
this is the opposite of ingenuity
@@wyattmc.3427 Interesting please tell me more
I'm playing around with a classic wood splitting device 😀
Fuck this was a really hard watch. God rest Warren’s soul. You deserved so much better
If you are wondering wtf is this. It's a tool that, your dentist will have to use, if you're not brush regularly. xD
Spell right
My god - your Mr. Pots from Chitty Chitty Bang Bang‼️
Ya I could see that
Having anime flashbacks here.
"We embark on the winding spiral path! The paths of man and beast intersect!"
-Simon
My favorite comments on this video Gurren Lagaan
Reamer, I hardly knew her…
I’ll see my self out.
Dad jokes 🤣
This is SICK!!! I love it dude. Good work!
Dudes got mad skills
Im curious, if it was too hard for the lathe...how did you machine the face with the lathe
It was case hardened od the outside was much garden than the inside. Good catch.
*harder
Its not really too hard for carbide, but those interrupted cuts are hell on a carbide insert and will destroy them real quick.
@@christopherjones7191 Yes indeedy
I really love spirals
TOOL. Not you the band😊
the things that Machinist can create are sooooo frickin dope man.
Dude that sounded like Scooby-Doo characters running in place
As a child, I was told Axicorns didn't exist
Wouldn't you have to secure every piece of wood very very well in order to use it with a handle like a ratchet?
So that was the reasoning behind the blades to secure the work against the rotation of the screw.
@@HughsllcThat will either rip the anchor hooks from the machine, or dig a trench in the piece of timber.
@@Erebus.666.no trust me, ive used one of these wood splitters and that works perfectly fine. Altough you have to make sure the wood is not hitting anything fragile, like the lines, but that i think we both know😂
Man, your mother’s gonna be awfully mad when she finds out what you did with some of her favorite toys.
That's super rude and close minded of you.
This was his dad's 😂
It’s a butt plug, one size fits all. Or will! Lol
💀
Yeah this sound of an old broken toy makes me feel like I’m back in 2000s
Its made to dig to heaven and beyond
He removed the unicorn to find a lil cat
I pooped myself 7 times watching this!
That's a short video too 😳
"so the screw can spin freely" 🎙️
Bro what made everything better was the gradual decline in audio quality throughout the video
I honestly don't understand why this video got so popular its horrible lol 😂 😅
Haha
Sounded like cartoon "twinkle toes" like when they are tip toeing 😂😂
Bro, remember to use a ceramic insert, they cut hardened material better than carbide
If I had one handy I would have. But ceramic hates interrupted cuts too
There is no steel alive that won't yield to carbide. There are different grades of carbide but every one of them is harder than any hardened steel.
@@verteup Yep way harder and way more brittle.
@@verteupyes. But it shatters really quick when it cannot make a continuous cut. You probably waste inserts for $50 just to cut into that hardened spiral. Better use a grinder when you don't have a customer paying for your consumables...
phone going through all the stages of tinnitus in one video
That one machine sounded like when cartoon characters tip toe
Can't wait to see you finish operation axecorn subbed
I subscribed to your channel to hopefully jumpstart your channel growth.
That’s fuckin awesome machining my man!
Dr Robotnik and Dr Wiley would be proud.
Imagine my utter disappointment upon learning that this isn't going on a Roman chariot or a 007 type spy car....
Yet...
Gives me flashbacks to the coal mine.
My wife is gonna LOVE this!
I know your mic is terrible quality, but I actually really like the sound.
Homie drops his phone in the water halfway through the video
I absolutely love when people know how to make their own shit out of random shit
Hephaestus himself would be proud. What a beautiful tool🙏🏻😂
I like how goes from clearly speaking to a Commercial pilot
Apparently it's the new viral tend lol
No one’s gunna comment on the fact that that lathe sounded like Mr.Crabs walking☠️
That's like my Voc tech grad project
💫
Subbed earned. Love the work man!
That really is a unicorn of a tool.
The table has gone Majin. The M is proof! Buu will be proud. Babidi too
Камина, братан, я знал, что ты жив
There’s no way this just popped up on my feed, I’ve told myself no to buying the exact same wrench..
But now I gotta lol
Big Daddy from BioShock
100% building a big daddy suit.
The sound quality is getting better as we speak
Bro got that 2012 cod mic 💀
My man. That is not a unicorn screw. That is a screwnicorn. Missed opportunity.
To everyone wondering why, I think the audio sounds bad because something is covering the mic, probably his hand, it’s a pretty easy mistake to make if you’re recording on a phone
Yep was my finger
I regret having earbuds in
LOOK OUR WOOD HERE IT COMES 😂😂😂
Dude that is some really crazy work great job
Glad you like it
Bro I have no idea what are you doing but keep going!
Spiral Power!
At the end your voice also turn metalic😊😅
Looks like a different unicorn screw at the end
What a coincidence: Unicorn Screw was my nickname in high school.
The power of the spiral!!!!!!!!!!
Drill to the heavens 😀
Row row fight da powah
Not the finger over the mic audio 😭
Scary vhs tape audio be like
With your drill, pierce the heavens!
Looks like conehead from 80’s horror movie
That Rigid still had warranty
Great video
That looks like the bit on the drill dozer in _Drill Dozer_
It’s a pipe reamer.
Nice work
we’re rich! we’re rich! rock n stone. we’re rich!
I have no idea what this is but it looks rad
Looks like the drill head doll from demonic toys
The drill that piece the heavens
Looks like kenny from South Park
Some Gurren Lagen shit right here
Had to hand cut and thread some pipe today, those work surprisingly well for deburring the ends of the pipe
If those hands could talk .❤
I can't let them speak publicly lol 😂
This is the answer to that. No one sailing what I need. What do I do? MAKE IT 👍.
God bless you and your work
Impressive Sir!
Thank you 😊
Didn’t know the guy on the phone from FNAF also records RUclips videos
Когда жена попросила апгрейдить свою игрушку 😂
That's some "butt bolt(screw)"
The design is very human.
Ничего не понятно но очень интересно
это пни колоть, называется "морковка", она вкручивается в пень и раскалывает его.
I’m high. I don’t know what the hell is this for it hell yeah. 💪🏽
Context Missing !
There is a long form video on my channel that has a summary of the full project. The shorts are more live updates while I'm developing somthing.
Not a clue what this is for or what ir does but it shure is one cool looking tool
What is that thing used for, it looks like something angry space miners would attack you with.
So thats a pipe reamer for deburring the insides of pipes. Or a drill that peirces the heavens 😉
@@HughsllcWhat was the original tool you cut the bit off of? Never seen one, it looks like a hydraulic drill?
@@Lotek117the original tool was a pipe reamer like he said already.
@@Lotek117it's for Debutring or reaming pipe like he said, but it usually goes into a socket on a ratcheting device attached to a handle
*I believe i have lost my hearing and my lawyer will soon be in contact* 🐴
Groovy man 😎
Helical bro 😀
Slow the lathe way down. And use coolant.
It was 300 rpm
"original sound"
The sound of silence