LOVE The on top of a trim and take the ones from the back, I like the idea of only doing 2 sides of trim so it looks like just the corner of the door? And then in the negative space you could engrave words that say "Door Corners" Or whatever you call them. LOVE THESE!!
Love the trim! We use glue dots from dollar tree to secure when we do something like this. I also use them to put my door corner on my computer monitor. Opened up a whole new market! Computer toppers!
Nice idea simple, to me is always better. I did a quick look and not see a video of the corner topper. I am going to attempt my first ones next week but using my CNC as the only laser I have is the F1 Ultra. May I ask what the top length is? Thank you for all the great ideas.
As a design enhancement, you could have incorporated hooks on the side pieces. That way you may not need the wired ties and you could have just hung it onto the wire rack using the hooks. Just a thought.
Can't believe I didn't like this the first 2 times I watched it- done now! If you had it to do again, would you use the same colors? Kim mentioned white but wasn't sure where she would have used white?
Keep the trim. It makes it look like the trim of a door with the door corners. Also if someone wanted to see it on trim that looks like their door trim, it could be easily shown.
That is so cool. I like the trim, looks more like a door frame. Any idea how many 12X19 pieces of MDF I would need for a desktop? Thank you for all you do for us. This is Penny AKA Kevin and Penny
I like the trim. You could reduce weight on the display by cutting out the entire middle and leaving it open, just leaving enough for the trip to snap on with some magnets. Would help sell the doorframe look in my opinion.
I would suggest a printed decal on the front face to give it a look of a real door slab. Then the white trim would look better. Given the wire rack is wider, you could increase the width helping with the illusion of a real door slab. Just a thought.
I like the trim but it needs to be flush with the shelf behind it so you wouldn’t have to put a corner piece on top of the trim. Can you use a lighter weight material for the trim?
Why not just incorporate hooks into the design of the display? That way you could just slip it on and off of the wire panel or peg board easily, without having to worry about zip ties.
LOVE The on top of a trim and take the ones from the back, I like the idea of only doing 2 sides of trim so it looks like just the corner of the door? And then in the negative space you could engrave words that say "Door Corners" Or whatever you call them. LOVE THESE!!
Man, the bees are awesome! As always great projects!
I like the trim as it looks like the trim around a door. Cute display!
What if you make a cute little mini door with a miniature example so people can see what the display looks like? Love this so much
I like the trim. It describes what the item is and it looks nice.
I like the trim. It covers the tabs/slots on the display and makes it a more finished look.
Love the trim! We use glue dots from dollar tree to secure when we do something like this. I also use them to put my door corner on my computer monitor. Opened up a whole new market! Computer toppers!
Cool project!
Cool project by the way. ❤
This is genius!
Love the trim❤
I say no trim or paint the trim a darker color so it does not take away from the door corners. Thanks for all you guys do!
It's great. Opinion time, only because you asked 😂, paint the whole thing white so the product pops.
I like the trim.
Love this idea!! If you don't mind me asking how do you guys display your door signs at the craft shows?
I love the trim!!
I like it without trim
Great video!
Definitely with trim!!
If you decide on trim I would go with smaller shoe type trim for corners or against baseboard.
I vote smaller trim.
With trim! 🎉
You should incorporate a French cleat system for hanging the display rack. Eliminate the zip ties.
I like the trim. Maybe make the empty space look more like a door?
Nice idea simple, to me is always better. I did a quick look and not see a video of the corner topper. I am going to attempt my first ones next week but using my CNC as the only laser I have is the F1 Ultra. May I ask what the top length is? Thank you for all the great ideas.
Thank you for the video! Do you sell svg files for the display and the door corners (especially the beach chair one)?
Love the trim! No room on a table?
Oh haha. You just said table. Very cute!!
As a design enhancement, you could have incorporated hooks on the side pieces. That way you may not need the wired ties and you could have just hung it onto the wire rack using the hooks. Just a thought.
YES! Going back to the drawing board!
Can't believe I didn't like this the first 2 times I watched it- done now! If you had it to do again, would you use the same colors? Kim mentioned white but wasn't sure where she would have used white?
AWESOME
Keep the trim. It makes it look like the trim of a door with the door corners. Also if someone wanted to see it on trim that looks like their door trim, it could be easily shown.
I like the trim. Maybe make it a couple of shades darker than the shelves
With the trim
Is your bee corner hanger on your site? I can't seem to find it ?
That is so cool. I like the trim, looks more like a door frame. Any idea how many 12X19 pieces of MDF I would need for a desktop? Thank you for all you do for us. This is Penny AKA Kevin and Penny
Option B with trim so peeps know what the designs are used for…. In the open space between the trim, you can add writing or your logo or something.
Love the trim! I think it would be better with two shelves and not the three.
OOO yeah. I am gonna make a 2 shelve one too.
I like the trim. You could reduce weight on the display by cutting out the entire middle and leaving it open, just leaving enough for the trip to snap on with some magnets. Would help sell the doorframe look in my opinion.
I would suggest a printed decal on the front face to give it a look of a real door slab. Then the white trim would look better. Given the wire rack is wider, you could increase the width helping with the illusion of a real door slab. Just a thought.
Sorry Kim I like option A. I like it better without the trim
Where do you get the mdf you use?
Where did you get the cute bee corner door hanger?
WITH/ ON the trim
PAINT FRONTS WHITE to look like a whole door and door frame
I like the trim but it needs to be flush with the shelf behind it so you wouldn’t have to put a corner piece on top of the trim. Can you use a lighter weight material for the trim?
Can you change the tabs n slots like that in xcs or illustrator
I like the trim, maybe cut it shorter so it is flush with the top of the shelf. Eliminate the odd lip that hides a portion of the design.
I’m team trim
I'm team "no trim"
Trim with corners ontop. Lets people see what they would look like on foor frame
I like the trim if it wasn’t as thick.
I would do a smaller trim piece so that it’s not so overpowering.
on top of the trim. that shows what it will look like on top of the door trim in there house.
I say keep the trim .
No trim if white. Trim if you paint trim darker
No trim
If the trim was smaller
Why not just incorporate hooks into the design of the display? That way you could just slip it on and off of the wire panel or peg board easily, without having to worry about zip ties.
No trim. Keep it simple
No trim. Or possibly paint the trim onto the base.
What is up, welcome back and doyutodobibutudo.... In English?
No Trim. Just adds bulk and weight
No trim...
Without
I say no trim.
No trim
No trim
no trim
No trim
No trim
No trim
no trim