My bro fevibond or is type k adhesive se itna heavy magnet kabhi nhi tikta ye fir se ik side a jayega. Use only Fevitite or any good hardner/resin bond. Apart to adhesive method is gud.👍
@@YoursownChannel bro mera aim apko Galt sabit krna nahi hai. But aap ka agar kaam hai ye to aap ne khud hi dekha hua hai k glue kaun sa use hota hai speakers k liye.
rajveer singh bahi maine use kiya hai isi liye bahut der pahle abi tak usme koi problem nahi ayi hai bas fark sirf itna hai j bahut time leta hai set hone me aur magnet jab centre me ata hai to uski bahut strength ho jati. Baki bhai video dekhne k liye thanks. Koi ni next time araldite use karenge.
@@Sandeepsingh-vz3px aap ne sahi kaha . 100% ye fivibond kisi kaam ka nahi . magar paper ko to aap achha gum dalrahe hai .vahi gum is ko bhi daal sakte hai na . or jaldi bhi suuk jayega gum.
To retain the most power and magnetic efficiency out of as magnetic 'circuit", the plate surfaces and magnet ring surfaces need to be as smooth and close together as possible.. By not taking time to clean the adhesive off of the pole plates and ring, the plate/ring contact surfaces are gapped, ever so slightly, but GREATLY reduces magnetic flux conduction.. Think about the pole plate and ring distance like any other 2 magnets or iron----- the closer they are together, the more strong the attraction, the farther- the less the attraction.. His technique might be close, but the quality of workmanship and loss of efficiency of the loudspeaker after reassembly are absurd.
ÉSO ES VERDAD. YO PERSONALMENTE REPARO SPEAKERS Y CUÁNDO ME TOCA PEGAR LOS IMANES. SIEMPRE LIMPIO LAS PIEZAS POLARES DE LOS RESIDUOS DEL PEGAMENTO ANTERIOR.
You are not cleaned the magnet at all all the residues still present which affects the sound effects. Please clean it properly and use good adhesive. Rubber adhesive will not work for joining metallic objects with magnet.
sir mere pas 8 inch ka speaker hai vo b shift huya hai isi liye usse dubara bna rha hu but glue kon c lgani chahiye 2 mix wali ya fevibond?? magnet ki polarities pe video bnayiyega ki agar pole shift ho jaye to kya hota hai
sir 2.5 inch speaker ka surround repair kaise kre , aur delhi mein kahan milega rubber surround. mere pc speaker ka rubber surround fat gaya hai. please please reply dena sir.
सर एक बात बताऔ मै अपने हाथ से 12"स्पीकर 300 वाट का स्पीकर बनाना चहेता हु पर एक बात समज मे नही आ रही है कि 300 वाट की मैगनेट बडी होती है बो 12"कैबनेट मे कैसे कसी जयेगी क्या मैगनेट मे और भी सुराग होते है कैबनेट कसने के लिये ? क्यू की मै पहेली बार स्पीकर बना रहा हु !
So I repaired a speaker it turned out to be fine the coil is freely moving and totally OK sounds fine too but when I turn the Bass on the Cone vibrated really too much the Bass is not like original built .. So anyone who can tell me where might be the issue?????
मेरा स्वीकार जो उसका हर बार बारबार फूकता और तो उसे बडी कमी स्वीकार और जो इसपाईडर बीच कि जगह होती । वो जगह टियूप जगह छोड़ देता है । चाहे कितना भी लगा दे । टियूप का नाम बोनटेड ।
@@YoursownChannel jnaab maine aaj tak ik shota 3 watts ka speaker b nhi dekha jisme is tra ka solution use Kiya ho. Araldite or Fevitite use kijiye ye sahi nhi hai.
@@YoursownChannel aur ye is liye nhi use ho Sakta kyu k ye rubber based solution hai aur high power pe jab speaker ya subwoofer run hota hai to jo aap ye metal ki plate lga rhe ho vo b heat hota hai. Jada nhi but thoda heat Rehti hai is condition me ye solutions ki strength Kam ho k khatm hi ho jati hai.
rajveer singh bhai j speaker heat nahi hote kayuki j port bale enclosure me lage hote hai aur isme ventilation gap hota hai j na ke barabar heat hota hai.
you are a good technician, really I like your work. thanks for your work.
आपका हर video अच्छा होता है,सीखने को नया मिलता है.......
Tumhara kaj bahut Sundar hai.... My Bangladeshi dost 👍👍👍
bahut achchha video banaya hai aapne thanks
bhai mere pas to aise 3 speakers the jo girne ke karan shift ho gye the , thanks for your help
right process but this adhesive not for magnet repair
My bro fevibond or is type k adhesive se itna heavy magnet kabhi nhi tikta ye fir se ik side a jayega. Use only Fevitite or any good hardner/resin bond. Apart to adhesive method is gud.👍
Bhai meri repair ki shop hai 1 se 2 saal pahle b fevibond hi use kiya abi tak to koi complaint to ayi ni ho sakta hai ap sahi ho.
@@YoursownChannel bro mera aim apko Galt sabit krna nahi hai. But aap ka agar kaam hai ye to aap ne khud hi dekha hua hai k glue kaun sa use hota hai speakers k liye.
rajveer singh bahi maine use kiya hai isi liye bahut der pahle abi tak usme koi problem nahi ayi hai bas fark sirf itna hai j bahut time leta hai set hone me aur magnet jab centre me ata hai to uski bahut strength ho jati.
Baki bhai video dekhne k liye thanks.
Koi ni next time araldite use karenge.
@@Sandeepsingh-vz3px aap ne sahi kaha . 100% ye fivibond kisi kaam ka nahi . magar paper ko to aap achha gum dalrahe hai .vahi gum is ko bhi daal sakte hai na . or jaldi bhi suuk jayega gum.
Good work. I am from Pakistan but u r skilled
Which speaker's are using in pakistan ahuja
Thanks to information 👍
Very interesting video good mechanical and happy new year 2020 advance
Nice video. Thanks
You are a very good technician really i like your work and thanks for advice where is your shop .
Osm video bhaiji 👍
Thanks
Bhai magnet sa only magnet sa speaker kase banaye isper video bano please 🙂
Very good bhai
Thank you sir for this idea💡
Sir apne mara 750 rupees bacha liye thank u sir
Sir ji well-done
Very Use ful video
Hii
To retain the most power and magnetic efficiency out of as magnetic 'circuit", the plate surfaces and magnet ring surfaces need to be as smooth and close together as possible..
By not taking time to clean the adhesive off of the pole plates and ring, the plate/ring contact surfaces are gapped, ever so slightly, but GREATLY reduces magnetic flux conduction..
Think about the pole plate and ring distance like any other 2 magnets or iron----- the closer they are together, the more strong the attraction, the farther- the less the attraction..
His technique might be close, but the quality of workmanship and loss of efficiency of the loudspeaker after reassembly are absurd.
ÉSO ES VERDAD. YO PERSONALMENTE REPARO SPEAKERS Y CUÁNDO ME TOCA PEGAR LOS IMANES. SIEMPRE LIMPIO LAS PIEZAS POLARES DE LOS RESIDUOS DEL PEGAMENTO ANTERIOR.
Good information sir
Can i ask where to order mateeials for making voice coil ? What material to used? Thanks for your instructional video
Daya very nice video baai
Supper bhai
Very good
Nice repering speker..........
good . . . i like its ???
Mast video
You are not cleaned the magnet at all all the residues still present which affects the sound effects. Please clean it properly and use good adhesive. Rubber adhesive will not work for joining metallic objects with magnet.
I was too thinking the same. Magnet centered with just rubber glue is never gonna work. Too he didn't ever show the cone adhering to the frame.
Nice video thanks
Sir speaker ka magnet kaise charge karte hain iss par ek video banov plz plz
so good work
Very nice bro Abe video banou spekar Kay baray may
Thanks bro
Sir ahuja k wallspekar mai jo volume control hota hai us ki video banaao
Dil khush video 💕💕💕💕
Sir thank you so much
Thanks Vai Jan
Voice record karta samay Background ka sound mute kar dena okk. Or video bahat a66i hai👌👌👌
What is the mm out side....of coil
Replay
176mm
Eu tenho um curso de reforma
Sir mere pass bhi hai aisa tuta hua speaker ab mein use thik katunga sir
dj Vicky Rockstar from mangollu
Home theater bass speaker same oise hi hua hai
Nice information
#chintamanitech
Good job
Nice
sir mere pas 8 inch ka speaker hai vo b shift huya hai isi liye usse dubara bna rha hu but glue kon c lgani chahiye 2 mix wali ya fevibond?? magnet ki polarities pe video bnayiyega ki agar pole shift ho jaye to kya hota hai
Nahi sir fabibond de nahi chipkega iskelia aralite chahia .....
good information..
Aoudiotone ad18×2050es 4 speaker bajanse phatake Jese awaz ati he
Pura naya speaker he
Thanks
Thanks for knowledge
Nice video
Speaker ka ek Saman Kaise kharide aur kaise naya speaker Banaye
Super sir🙏🙏
Nice sar🌹
बहुत सुंदर
Nice sir
jaha fevibond lagana tha waha aralite lagaya aur jaha aralite lagana tha waha fevibond lagaya.
ekdum sahi kaha😂😂😂😂😂😂
Bhai ne jaldi jaldi me vdo bnaya hai .,😵
Good
Bhai speaker sell karte ho
sir 2.5 inch speaker ka surround repair kaise kre , aur delhi mein kahan milega rubber surround. mere pc speaker ka rubber surround fat gaya hai. please please reply dena sir.
Koyal ke sathe Jo wair lagaya usko kya bolte hai ? uski price kya hai?
What is that hard paper?
सर एक बात बताऔ मै अपने हाथ से 12"स्पीकर 300 वाट का स्पीकर बनाना चहेता हु पर एक बात समज मे नही आ रही है कि 300 वाट की मैगनेट बडी होती है बो 12"कैबनेट मे कैसे कसी जयेगी क्या मैगनेट मे और भी सुराग होते है कैबनेट कसने के लिये ?
क्यू की मै पहेली बार स्पीकर बना रहा हु !
Sir 🙏
quil me glue jaane se kaise roke pl tell
Megnet coil dalte hain to fir battery se check karte hain to coil uper nhi aati hai
Speakers ka samane kahe milage
Super
What is the rule of voice coil turns.How many turns should be outside magnate level
Or ledwire 48no use kro or uspe slip chada ke tuatagi nhi...
So I repaired a speaker it turned out to be fine the coil is freely moving and totally OK sounds fine too but when I turn the Bass on the Cone vibrated really too much the Bass is not like original built .. So anyone who can tell me where might be the issue?????
nice sir
recone karnece kya original ke tarah sound ata hai
Good sir ji
naic
Plus minus Kaise Pata chalega
You need to clean the magnet properly
मेरा स्वीकार जो उसका हर बार बारबार फूकता और तो उसे बडी कमी स्वीकार और जो इसपाईडर बीच कि जगह होती । वो जगह टियूप जगह छोड़ देता है । चाहे कितना भी लगा दे । टियूप का नाम बोनटेड ।
Arolaide lagaege to nahi niklega
Bhai sahab mere spekar me airolight chali gyi hai or coil andar hi re gyi hai to ese kese repair karu
Fevibond se magnet fix nahi hoga bhai........!
Usko Araldite lagana padega ..!
galt information mat do you tube pe..###
Ho jata hai bhai maine use kiya hai ha lakin thoda time leta hai fix hone me try kar lo.
@@YoursownChannel jnaab maine aaj tak ik shota 3 watts ka speaker b nhi dekha jisme is tra ka solution use Kiya ho. Araldite or Fevitite use kijiye ye sahi nhi hai.
@@YoursownChannel aur ye is liye nhi use ho Sakta kyu k ye rubber based solution hai aur high power pe jab speaker ya subwoofer run hota hai to jo aap ye metal ki plate lga rhe ho vo b heat hota hai. Jada nhi but thoda heat Rehti hai is condition me ye solutions ki strength Kam ho k khatm hi ho jati hai.
rajveer singh bhai j speaker heat nahi hote kayuki j port bale enclosure me lage hote hai aur isme ventilation gap hota hai j na ke barabar heat hota hai.
Tulsi Das
Thanks for you
सर जी क्वायल की निगेटिव पाजिटिव की पहचान कैसे करते हैं?
15:20 bass test batao!!!
Fir mene 4 speaker ki reconkit change kiya for Wahi problem ati he
Good sar
Esa krnese spekar ka jo pehle jesa sound tha wesa hi sound ayega ya sound ki quality kam jayegi
Bhaiya, aap new voice coil kaha se khridte hain aur dukaan waale ko kya kehna hota hai correct voice coil paane ke liye?
Ajju bhai
Sir paper cone or 🕷️or coil kha milti hai
Supar
rajesh bhowmick dj
Fevi bond se nahi lagega arelit cheyi
Sir par apne magnet change nahi ki h to kya speaker chal sakta h kya q ki log bolte h ki magnet charge khatam Ho jati h
bro agar 600 wat ke spkr me 1000 ki coli dal de tu kya hoga
Bass jyada aayega aur kuch nahi...watt nahi badhegi
mangnet ulta lag gaya (+ - )to speaker chalenga?
Bro hum esse 4 layer coil me banate h 5.6ohms me fad bas 2speakero ka bass 1 me or 600 watt me
Bro aap kaha see ho aapka no
Tweet
Car tweeter ko repair kiya ja skta he ya nahi
Mujhe lagata he ki manufacturing flat he