BTT Pi Board (An Alternative To RASPBERRY PI ) - Overview & Installation Guide
HTML-код
- Опубликовано: 23 май 2023
- Hi guys 🙂
With the Klipper fans growing and the shortage of Raspberry Pi boards, users are trying to find different solutions.
Meanwhile, some 3D printing manufacturers are making alternative solutions for the Raspberry Pi boards.
So, in this video, we will check one of Bigtreetech's solution, the BTT Pi version 1.2.
Here you can find out all about this new board and how to start using Klipper with it.
♦ You can find the BIGTREETECH BTT Pi V1.2 here (Not Affiliate Link):
biqu.equipment...
🔶🔶🔶 If you like our work and want to help the channel, you can contribute using one of the following...
🔶 PATREON:
/ ruiraptor
🔶 PAYPAL:
Use our email to send your donation ( ruiraptor.channel@gmail.com )
🔶 You can also help by using our Banggood affiliate links posted below (costs you nothing and you are contributing to the channel):
You don't have to buy the item from the link. If you click on them and then buy whatever you are looking for works!
♦ Ender 3 V2
pt.banggood.co...
♦ Creality Ender 3
pt.banggood.co...
♦ Creality Ender 3 Pro
pt.banggood.co...
♦ Creality Ender 5
pt.banggood.co...
♦ Creality Ender 5 Pro
pt.banggood.co...
♦ Creality Ender 5 Plus
pt.banggood.co...
♦ Creality Ender 3 Max
pt.banggood.co...
♦ SKR Mini V2.0:
pt.banggood.co...
♦ Artillery Hornet
pt.banggood.co...
♦ Artillery Sidewinder X1
pt.banggood.co...
♦ Artillery Genius
pt.banggood.co...
♦ Creality CR6
pt.banggood.co...
Thank you so much for your support 😉
🔶FOLLOW US ON SOCIAL MEDIA:
♦ / ruiraptor
♦ / ruiraptor
♦ / ruiraptor
Music by RUclips Library:
Palace of Roses - Aakash Gandhi
#Klipper #RaspberryPi #Bigtreetech
I have a cb1 and works really well. I ordered and now have one of these, too. It is much more practical than the cb1, unless you have a manta board...
Thanks for this, actually helped me decide between an orange pi or btt pi, i chose the btt pi. do you have setup instructions for the adxl345 on the btt pi? i can't get mine to work.
Awesome video, thank you for this.
THANK YOU!!!!! i installed it directly in my voron without realizing that it has a micro sd UNDER it (which is not shown in it's manual) I i kept trying to flash it with the usb port.
I love my BTT Pi, it works really good.
Just what II needed, thanks!
Se puede usar el connector usb c para conectar-lo a la placa de la impresora
Great product but the mounting holes are not the same. Just take a look at it. One is square the other one is not, you can visually see the difference between when it shows the top view of each board - just a heads up in case you were planning on using an existing raspberry pi case to use this board.
can you install rasbian and OS on this like a normal pi?
buen video tengo una duda , hay veces que conecto a la corriente y no se conecta en la pc , tengo que intentar varias veces , sabes a que se deba? gracias
What if ı forget to remove jumper before ı power it with 24V ?
The long wire isn't the antenna right? It's the sticky pad? Do I need to worry about where it's mounted? e.g. far from the steppers, and not near the board? on or off the printer's metal frame?
Thank you Rui ! 👍
excelente video una pregunta como configuro para el adlx?
Why do we have to remove the red bridge or Jumper??? Prevent power from getting from screw connector to USB C???
What is the screen that the BTT Pi is connected to via HDMI? I was having trouble getting my SKR board to connect to the BTT TFt, so I wanted to use an HDMI screen.
boa noite
I'm purchasing a voron 2.4 ldo kit and it wont come with a pi my question is can i use this as a direct replacement ill also be using a ERCF filament changer. or should i just bite the bullet and get a raspberry pi
One of the four mounting holes does not line up with the hole for the pi. This makes any mounting bracket or case designed for an actual rpi, unusable for the BTT pi.
At