NordicPulver PRO+ Powder Coating Gun System // Powder Coating Wheels
HTML-код
- Опубликовано: 16 июл 2019
- NordicPulver PRO+ powder coating gun is professional powder coating equipment made to be used by professionals and hobbyist users at an affordable price. NordicPulver PRO+ comes in a case and is supplied with a water filter, air pressure regulator attached to the gun and clip on wire connector. Moreover, it comes with 2 spare containers for the faster color change between coatings.
You can buy this gun at:
nordicpulver.dk/
Or eBay:
USA, INTERNATIONAL
www.ebay.com/usr/balticmechan...
UK, EUROPE
www.ebay.co.uk/usr/balticmech...
DE, EUROPE
www.ebay.de/usr/balticmechani...
#powdercoating #powdercoat #nordicpulver 
Наука
hello your system allows it to make multilayer?
This seems to be a really nice and uncomplicated kit. The price is really affordable too. Do you sell spare parts also?
Thanks! Yes, we have all the spare parts listed in our webshop: nordicpulver.dk/powder-coating-spare-parts/spare-parts-PRO
Is this being shipped to the US with or three-prong plug? It shows the EU style plug , so how does the conversion work?
We ship all of our powder coating guns to US with US standard nema 5-15 three prong plug.
The problem is the powder. Powder sold here in the States is negative to ground, I’ve read that it’s the opposite for Tribo. Since powder in general doesn’t list which system it’s for, we assume it’s just for “standard” guns. How can we tell if it will work with yours, because the colors are severely limited for your guns here with powder we know works (hard to get)?
I’d like to try this, as it seems to have some advantages.
So does the Tribo version not require high dc voltage then? I'm trying to figure out how (or where) the system in the video converts and steps the voltage up...
Milk Manson there is no high voltage created by the gun from a power source. The voltage is created by the powder rapidly moving through the plastic tube, which is convoluted. It creates an electrostatic charge that is in the powder as it goes through. It’s similar to the static you can get in dry weather from a carpet.
Hi I live in Ireland do you know of a supplier of tribo powders?
How much powder is usually used for a rim?? Hard to say how much you need, dosnt seem to use that much when the standard amount is a few grams ?
You are correct that it does not require a lot of powder to coat a rim. We have been using 70-80 grams of powder to coat 16"-18" rim.
How many KV gun output power
Ar šiam pistoletui ne tribo dažai visai netinka? T.y. neįmanoma visiškai dažyti?
Naudojant ne tribo miltelius, milteliai nebus įkraunami ir nekibs prie detalės. Įmanoma jais dažyti nebent įkaitintą detalę, kai milteliai limpa besilydydami, bet taip dažyti nėra rekomenduojama ir gali būti nesaugu.
How does the powder coating coat under the ground clamp?
You remove it at the end and Just cover it
Did you watch the video? :)
@@dignitas1980 a year ago.
Why did u put the crocodile clip on the front of the rim !!!
I have a problem with my gun, like it doesnot have the electrostatic for the powder to stick, please help
same here, it doesn't work with uk. I looked it at the plug it's just wired to earth so how it can get a charge
Hello Kenneth,
Are you using powder suitable to use with tribo type powder coating guns? Where did you purchase powder?
@@nordicpulver3909 prismatic powder
@@kennethmartinez5205 That is likely to be a problem. We have been recommending www.powder365.com to our United States customers for years as their powder is tribo compatible.
Dimana saya bisa memesannya...
nordicpulver.dk/powder-coating-systems-and-equipment
Can you powder coat over the factory paint?
Regular paint might start peeling off while curing powder at 180 degrees Celsius. You could powder coat over factory applied powder coating. I would recommend sanding a surface a little bit and then spraying it with powder of your choice.
@@nordicpulver3909 당신회사 제품을 구매 하고 싶습니다
Hi, how many Kv?
It makes it's own static as the powder moves through 2 what looks like teflon plates. No AC Power is used. Search other videos and it will be explained better.
digitalwoodshop, thank you!
do you have an email or website to contact you?
I want this setup when available please send address
Am from India I want this machine kit
You can find it on ebay: www.ebay.com/itm/163734889152
Here is version in a suitcase: www.ebay.com/itm/163780837512
And here is our webshop: nordicpulver.dk/powder-coating-systems-and-equipment
Audi 80/100 Quattro Wheels
For basic use it's OK, but for something Which expect quality this set is not enough ;)
Good grief, lose the trash metal music.