Hi Jack, this was magical to watch and brought be back a few years when I had issues setting up Volvo Vida. In Europe you have to get the Volvo dealer to send software to your pie Id and then you can retrieve it to your indy vida. Several emails and phone calls over the course of weeks but totally worth the thrill I got when I programmed that airbag module 🤣
Thanks for sharing all the info. I haven’t had one myself, but I’ve heard from others that they haven’t been able to log into MUTIII SE even after registering an account and buying a subscription. Were there any challenges you had initially getting logged in?
Thank you for sharing Jack. New to your channel here, first video of yours I’ve watched. I take it you posted this issue on DN? Been reading a ongoing tread on this. This video has been very helpful.
@@adasaimingbyjackshort2123 did you have any issues launching the application after purchasing the the required day subscription? I’ve read majority of users can’t get the application to launch correctly after purchasing the day pass.
Hi Jacks. I appreciate your videos. I'm looking to reprogram a used ecu to my 2009 mitsubishi endeavor my original one got water damaged. After installing the used. Car cranks but won't start. I figure it requires reprogramming. I got my cardaq 3+ with subscription to mitsubishi website. But won't allow me to download the DXA package to reprogram the ecu. Any advice from you would be greatly appreciated. Looking forward to your response. Thanks
Does this work with lower end USB, OBD II and VCI adapters? I have a VCI adapter for my Toyota vehicles. Wondering if that will work for this software too
@adasaimingbyjackshort2123 Very nice presentation of the perils we have to go through with manufactures just to take care of our customers. Nicely laid out presentation. It is people like you and many others sharing content to ease the pain you went through. Been there and done that syndrome!! I bought the Panasonic Toughbook tablet and loaded Windows & 32 bit. Is this what you are currently using or have you migrated to Windows 10 yet?
hi , thank you it's a full-time job just to keep up with all the changes. multiplied by all the manufacturers, yes I did upgrade to windows 10 they also changed the login now using a cell phone authentication process, I always say if everything was easy life would be boring,
@adasaimingbyjackshort2123 Hi Jack! You are correct they are using the Authenticator tool now. It is the only way to login in. It is very challenging to say the least. I am going to stick with the Windows 7 application till they force me to change. Seems Luke they are slow to change so I should be good for a while. One day I should drop you a line. You have posted good info on DN which has helped a lot of people.
Hey Jack. I'm doing the same job. coding airbag module on 2023 RVR. There is no file to be found in the CdgData folder. Where did you find the file? Thanks -Kevin
You mentioned in this video or the other one on Mitsu that you finally got ahold of someone at Mitsubishi that would listen to you. May I ask who you contacted? I’ve still been unable to login through DXA with an active subscription.
Hi I called the 800 number for Mitsubishi medic hotline, The first few people I spoke to said they only service the dealership but finally someone paid attention guide me through the system,
I tried to login today and I also had an issue it said login failed. So I updated the diagnostic software to the latest Version and I was able to login and communicate with the vehicle no problem,
@@adasaimingbyjackshort2123 yes I’ve been dealing with Mitsubishi the past week and they pushed an update to DXA out. This fixes the login issues. They also recommended using Windows 10 with Chrome as the default browser. Glad you got yours working.
@@adasaimingbyjackshort2123 Thank you for your response. They might fixed in the meantime. They had for a while some issues with MUT3-SE (there was even a note on their website that the support was not available at the time)...
compatible tablet?.. ehh... it seems you have no idea how communication works between dar and the software on your PC don't you? to all viewers.. please save yourself a lot of money. you don't have to buy a special tablet because authorised stations use it.
fantastic video mate, there's a real lack of MUT based tutorials etc on youtube, would love to see more! 👍
Hi Jack, this was magical to watch and brought be back a few years when I had issues setting up Volvo Vida. In Europe you have to get the Volvo dealer to send software to your pie Id and then you can retrieve it to your indy vida. Several emails and phone calls over the course of weeks but totally worth the thrill I got when I programmed that airbag module 🤣
Man you're a genius keep them coming 👏💯 thank you
Great information, thank you for documenting this!
Thanks for sharing all the info. I haven’t had one myself, but I’ve heard from others that they haven’t been able to log into MUTIII SE even after registering an account and buying a subscription. Were there any challenges you had initially getting logged in?
Thank you for sharing Jack. New to your channel here, first video of yours I’ve watched. I take it you posted this issue on DN? Been reading a ongoing tread on this. This video has been very helpful.
Thank you, good idea I just posted a link on diagnostic network,
@@adasaimingbyjackshort2123 did you have any issues launching the application after purchasing the the required day subscription? I’ve read majority of users can’t get the application to launch correctly after purchasing the day pass.
Thank you so much for this amazing video.
Do you know if you can program a swap Engine Control Unit (ECU)?
Hi Jacks. I appreciate your videos. I'm looking to reprogram a used ecu to my 2009 mitsubishi endeavor my original one got water damaged. After installing the used. Car cranks but won't start. I figure it requires reprogramming. I got my cardaq 3+ with subscription to mitsubishi website. But won't allow me to download the DXA package to reprogram the ecu. Any advice from you would be greatly appreciated. Looking forward to your response. Thanks
Does this work with lower end USB, OBD II and VCI adapters? I have a VCI adapter for my Toyota vehicles. Wondering if that will work for this software too
I am struggling just getting the MUT III software to recognise my Cardaq-Plus. I installed the Drewtech drivers but there must be another step.
Can I use a Bluetooth OBD2 Connector with this software?
Does this software allow you to increase speed limiter on Mitsubishi
@adasaimingbyjackshort2123 Very nice presentation of the perils we have to go through with manufactures just to take care of our customers. Nicely laid out presentation. It is people like you and many others sharing content to ease the pain you went through. Been there and done that syndrome!! I bought the Panasonic Toughbook tablet and loaded Windows & 32 bit. Is this what you are currently using or have you migrated to Windows 10 yet?
hi , thank you it's a full-time job just to keep up with all the changes. multiplied by all the manufacturers, yes I did upgrade to windows 10 they also changed the login now using a cell phone authentication process, I always say if everything was easy life would be boring,
@adasaimingbyjackshort2123 Hi Jack! You are correct they are using the Authenticator tool now. It is the only way to login in. It is very challenging to say the least. I am going to stick with the Windows 7 application till they force me to change. Seems Luke they are slow to change so I should be good for a while. One day I should drop you a line. You have posted good info on DN which has helped a lot of people.
Hey Jack. I'm doing the same job. coding airbag module on 2023 RVR. There is no file to be found in the CdgData folder. Where did you find the file? Thanks -Kevin
What did you pay for your subscription
whats the cheapest method to use mut3 software suite with outlander 2003?
any simple device that can do that?
You mentioned in this video or the other one on Mitsu that you finally got ahold of someone at Mitsubishi that would listen to you. May I ask who you contacted? I’ve still been unable to login through DXA with an active subscription.
Hi I called the 800 number for Mitsubishi medic hotline, The first few people I spoke to said they only service the dealership but finally someone paid attention guide me through the system,
@@adasaimingbyjackshort2123 thanks Jack! They actually sent my info to a programmer and are trying to help. Appreciate the response.
I tried to login today and I also had an issue it said login failed. So I updated the diagnostic software to the latest Version and I was able to login and communicate with the vehicle no problem,
@@adasaimingbyjackshort2123 yes I’ve been dealing with Mitsubishi the past week and they pushed an update to DXA out. This fixes the login issues. They also recommended using Windows 10 with Chrome as the default browser. Glad you got yours working.
How did you persuade MUT3-SE software to use cardaq hardware?
Just update the cardaq plus 3 to the latest firmware available online from carDAQ it will automatically work for Mitsubishi
@@adasaimingbyjackshort2123 Thank you for your response. They might fixed in the meantime. They had for a while some issues with MUT3-SE (there was even a note on their website that the support was not available at the time)...
Ahh Man U need to start taking tech calls from people at cost
Hi great content! Question for you, can you force start the ignition on a vehicle with a keyless system/oss? Thanks
I am just trying to fix my lancer air bag code it’s a b223d does anyone know how to fix it?
Can that software and vci work 24v HD vehicle?
Hi, this software is only for cars and SUVs.
Ihav mitsumbish fuso need abs coding
Hi, Mitsubishi Fuso is a separate truck division. It's not part of Mitsubishi MUT3 diagnostic.
they dont have the file there no more
Please help mitsubishi asx air bag cording file send me
Hi, need valve body file outlander 2016 VIN JE4LD2136GZD12946
compatible tablet?.. ehh... it seems you have no idea how communication works between dar and the software on your PC don't you?
to all viewers.. please save yourself a lot of money. you don't have to buy a special tablet because authorised stations use it.
Hi, thank you for sharing, I appreciate your comments,
aww for f sake... stop talking about moving a folder where you are copying a file!!!