F-4G PHANTOM Wild Weasel 1/48 MENG
HTML-код
- Опубликовано: 6 июн 2023
- I was attracted to build this kit. I got a plan to build another phantom kit that I had purchased. you can enjoy watching next video once again; Wild Weasel 1/48th kit formed by Sculpture Village(Zoukeimura), but next kit is Mustang that I introduced in this video. I’ll present and implement all the etching parts in that kit and complete it. Enjoy and have a great time with my video. Thank you for visiting and watching!
한 층 더 업그레이드 된 팬텀을 제작하면서 새로운 묘미가 있었습니다. 한 번 더 WILD WEASEL 1/48 조형촌(Zoukeimura)으로 찾아 뵐 예정입니다. 다음 작품은 마지막 영상에 소개한 머스탱으로 골라 보았습니다. 프롭전투기의 특성을 잘 살려 보겠습니다. 에칭 부품도 빠짐없이 모두 구현해서 제작하겠습니다. 감상하시면서 즐거운 시간 보내세요~
God bless you and your family, friends, community and nation from Matilda, M. 
Развлечения
Encore une ☝️ superbe 🤩 réalisation…félicitations 🎊, je suis ton fan Français 🇫🇷…..
🤩🤩🤩 I've been waiting for you. MY friend! Always I feel honored that you are always wiht me here. Thank you for visiting! 😍😍😍
Nice job on the build, it looks is great. However, you have to understand F-4 Systems to understand the mistake that was made with the flaps. Hydraulic Pressure HOLDS the flaps Down. Hydronlics hold the Ailerons up. So when the phantom is at rest (no pilot engines off) there is no Hydronlic pressure, so the flaps (nearest to the body) would be up, as they are springloaded in the up position at rest, and the ailerons would be down as there is no Hydronlic pressure to hold them up so they droop. The only time the flaps would be down while the jet is at rest is if they are forced down for Maintenance.
Thank you for your kind explanation! Because of mechanical properties, I understand Hydronlics makes the flaps being up. I just chose unique and challenging options to show different type on my channel. Thank you for watching and enjoy watching! Now I'm supposed to show another F-4C Phantom in Vietnam War. Keep watching and giving your feedback. Thanks a lot!!
So long not upload video aircraft 😅😅, nice brother so so smooth woking u are the best maker brother n good job , welcome back brother 💪🏻✌️
Thank you! I'm always waiting for you with new kit. See you next kit!
@@matildamodels ok brother
Greeting Matilda M, I just found your channel while surfing the net, that Phantom was absolutely outstanding, the whole build and finish was done to perfection, congratulations on the project, you have yourself another subscrber, very bedt regards from Australia 👍👍👍👍
Thank you for enjoy watching my channel and subscribing! I'll do my best!
You have done it again!. Some of the masking was so clean I thought it was part of the kit until you peeled it away. The precision is breathtaking. Keep the videos coming, they are truly world class. With Vallejo paints too, they're my favourites. Respect again from England.
Thank you so much!! I'll do my best for my subscribers and complete perfectly. I've used Vallejo paints for four years and I'm satisfied with acrylic paints.
@@matildamodels That settles it for me. Allowing for your mastery and art, if vallejo are good enough for you, they will always be good enough for me. Thank you.
Great build mate. Glad to see to have great success with Vallejo Model Air......I don't.
Thank you! Having enough time to dry is important I think because acrylic paints are so thin and weak before drying.
Hey Matilda Models, this is a VERY NICE Wild Weasel-Phantom! Perfectly painted and built, as always with your models. Best regards from Germany. Cheers!
Thank you! my friend! I'll show you F-4G, another version later.
Eccellente lavoro su di un kit splendido,avrei optato per dei sedili eiettabili in resina,per il resto solo complimenti 😉
I could use the injected kit enough but I want to build it in itself packed in the kit, even more that's not too expensive. I think it's possible to complete the lack of some kit to use the injected kit. You can enjoy my new kit with a injected kit later. Anyway thank you so much ! Enjoy watching!
Great finish on the model, I like your weathering. But you made a mistake with the national insignia on the top wing. You followed the MENG's wrong instructions. National insignia is always on the left side of the wing on american planes from above and from below also. Othervise Your F-4G is very stunning model.
I perceived what you told me as you had advised. You know I just followed the instructions, but later. I'll confirm the errors and I'll try to reflect fine points that you referred to. Thanks for your advice and furthermore I got the same kit manufactured by Zoukeimura. I'll show you a completion without errors. Thank you for your advice!! I'll be waiting for your advice to the next kit; Mustang 1/48 Eduard.
Stars and bars (National Insignia) on US aircraft are on upper left wing, lower right. Thought you'd like to know. None under left or upper right.
Great build. I've actually have 3 of those to build and 1/32 scale one as well. I love F-4 Phantom Il. She is definitely my love of all aircraft.
Thanks again for your video
I want to experience 1/32 later but I got two more kits 1/48 phantom that I'll show you new video later. I'll do my best next kit! Thank you for enjoy watching Phantom kit on my channel. Please keep in touch with me and talk me your view and story about F-4 Phantom. Thank you!!
@@matildamodels I have (6 ) F-4 Phantoms and about 27 other models as well to build vise the 98% are all 1/48.
와우~~^^
봉구비어 검암점 주인장~~
또 놀러 가겠습니당~^^
Great attention to the details.
Your punctual view makes me happy. 😍
오!!멋지네요 형님 다음 머스탱도 기대됩니다~~^^ 댓글들이 점점 전세계로 뻗어나가네요 ㅎㅎ
음음~~ 흐믓해~~ 머스탱은 조금 다른 방법로 도색하려 해~
Perfect build 👍
🤩🤩🤩🤩🤩
I ,for one, would love for you to make a video of just the armament prep and paint
I'm with you there brother.
Great build.amazing finish!
Thanks a lot!!
Incredible! Looks real.
Thank you! I wanna make it looks not too much more and less than real just clean and neat.
I just found this video - great work! Would it be possible to make the font a bit larger when you give color references?
Thank you for your advice. I'll consider next new video on my channel. Thanks a lot! Continue to visiting!
Beautiful model 👍👏👏👏
Thank you! 🤩🤩🤩
Very nice job ,sharp detailing.
Thank you! I'll show you new kit next time with some different changes.
Phabulous Phantom!
Interesting that you use Vallejo paints and not Far Eastern brands.
It's good that you use Flow Improver, Vallejo paints are quite bitchy.
I had some mistakes at first using Vallejo paints but now I'm accustomed to using those. Furthermore I'm satisfied with various colors for air kits. You know thanks to a flow improver, I could extend and have more time to brush than before without it. Thank you for watching!
세계로 뻗어나가는 마틸다 모델스!!
이번에도 기깔나게 나왔네요. ㅎㅎ
🤣🤣🤣🤣 아~~~ 흐믓해요~~~
Magnificent build..
Thanks a lot!
Very nice work man. You just made it very easy for me to pick my next aircraft model project. You have a special talent man
Thank you for watching and enjoying. Whenever you have any question, ask me please! I would answer as possible as I know while building and completing this kit.
@Matilda Models I appreciate that very much and I'm sure some will pop up.
@Matilda Models ok so I got the kit. I will start on it as soon as I'm done with the new Border Models 1/35 wolf. I have 2 questions for now. What airbrush are you using and what PSI do you like to run your brush at? I appreciate the opportunity to ask some questions.
@@chrisg7398 I've used a Tamiya HG double action airbrush 0.3mm and a IWATA high performance plus 0.2mm. 10-15psi is enough for me to airbrush widely but 10psi is enough for me to draw lines such as camouflage. Everything that I've used is arlylic paint.
@Matilda Models awesome. Thanks man. That helps a lot. I think maybe I have my PSI to high. I've always had it at 20/22psi. And for some reason on every aircraft I do I get rough and bumpy paint right where the wings meet the fuselage. It drives me nuts and I can't figure out what I'm doing wrong.
I worked on the F-4G for 11 years (George AFB and Spangdahlem AB, plus Desert Shield/Storm) and never saw an AGM-78 or AGM-45 loaded onto a jet, not even a static display for open house or air show. Just my 2¢
honored to receive your feedback. I just followed the instruction and wanted to make AGM-78;anti-ship missile instead of other missiles. Thank you for your feedback.
@@matildamodels Thanks for your reply. The G models were loaded with AGM-88s or AGM-65D IR versions (the TV Mavericks were getting old). And of course two AIM-7s in the aft stations.
@@ga9633 I'll reflect your feedback to my new F4G 1/48th Zoukei-mura next year maybe. Thank you sir!
I wanted to watch this video, But by 38 seconds in I had to turn it off because of the music. Nobody puts that music as building background music.
Thank you for your feedback! I would have a plan to reduce the proportion on my work gradually.
Same terrible music!
@@billfrazier9628I'll consider.
Very nice build 👌
Thank you!
Very nice/clean build!!!!
What is the masking tape's wigth that you use on the ejection handles?
0.4mm used on the ejection handles. Thank you for watching and asking!
I like it
What a politely work. SUGOI !!!
Thank you for visiting and watching! PM!
Wow. A truly beautiful build of my favorite aircraft. What more.could I ask for
Thank you! 🤩🤩🤩 I'll answer as possible as I can.
Really nice build, bravo. If I saw correctly you did not use any putty to fill the joints. Is the MENG model so well engineered ? Greeting from Greece.
Yes, I almost didn't use putty because every part is fit perfectly. Thank you for watching! 🤩🤩🤩🤩
Looks cool.
Thank you for watching!
Fabulous! 👍🏻👏🏻👌🏻
Thank you!! 🤩🤩🤩🤩
Great looking model.. I have the same kit myself... Quick question. I see you put on the AGM-65 Maverick missiles on. Is there enough clearance to put third one on the bottom?
right! if you got a instruction, you could confirm it. But I detached third one because the weasel looked heavy and fat, not fast and thin. Thank you for watching and asking.
Very nice but an F4G only carry AGM 88 for their mission
I heard that's why their name is Wild Weasel. I just tried to build another missiles in this instruction. Thank you for your feedback. 🤩🤩🤩🤩🤩
Really nice! 😄
How was the fit of the kit? Did you have to fill anything or did everything go together weel?
It's very good kit to build, and you don't need to use a putty. Don't warry about that.
What you mean by that matilda?
Not only normal girls' names in U.K. but also the main character's name in famous movies; Leon and Matilda as well as in a novel and musical. That's why I love and use that.
как обычно, просто супер - молодец, но цвет сидений ужасен)
Despite some strange colors were suggested by Meng, I needed to follow the instructions a little bit. 🤣🤣🤣
@@matildamodels да это так🙂
Surrender 😂😂😂
😂😂😂
The music is annoying to watch this vid
Sorry to hear that and I'll change another music next vid not the voice of singer. The nex vid will be Jolly Rogers 1/72th Academy that is almost completed. You could enjoy watching it this weekends. Thank your for your advice!
에어브러쉬는 무엇을 쓰셨는지요
두 녀석을 사용하고 있습니다. 두 녀석 손가락의 세밀한 압력을 잘 받쳐주고 호응해 줍니다(두 녀석 더블 액션). 더 좋은 제품에 대한 욕심도 있었지만, 참아내고 적응하면서, 호흡을 맞추니 괜찮습니다. 0.3mm는 타미야 더블 액션 74537 사용하며, 0.2mm는 이와타 HP-B Plus 사용하고 있습니다. 0.2mm는 Psi 10 정도면 충분하며 더 낮추시면 거의 미친듯한 능력을 구현할 수 있습니다. 개인차 입니다. 요즘은 0.3mm 를 이와타 대신 주로 사용합니다. 아.. 정말 밉지만 타미야 0.3mm 활용도가 좋아서 0.2mm 이와타의 역할도 수행할 정도로 사용 범위가 대단합니다. 분사량과 압력만 잘 조절해도 0.2mm는 구매 안하셔도 될 듯 합니다~전 0.2mm 도 맘에 듭니다. 이와타는 우선, 페인트 양을 조금만 사용해도 좋은 것 같습니다. 청소도 잘 되구요.. 아크릴 페인트를 사용함에는 부지런한 에어 브러쉬 관리가 없으면 엉망진장이 될 가능성이 높은 것 같습니다. ㅎㅎ 그냥 그렇습니다. 개인차 입니다. 어떤 장비든 손에 익숙해지면, 수십만원의 가치는 넘어 선다고 믿고 있습니다. 방문해 주셔서 감사합니다.