I am in about the same boat. The value I find in these videos is if the day comes and you need a contractor for work like this, and don't live where you can cal DP, at least you have some idea of what should be done when a contractor tells you what he plans.
We poured the walls today on an ICF build for a HfH house using Plumwall braces and a different brand of ICF blocks. The braces are a quick, easy 2 man install but does have potentially sharp edges on the upright piece where you insert the screws. There are also pinch points that could be painful if not paying attention during install. The large adjustment bolts make it very easy and quick to level & plumb the ICF wall. We installed the braces after the 8’ walls were all in place. Each brand of ICF blocks has its advantages and disadvantages. The one we used were set into metal channels on the inside and outside of the blocks, both at the bottom and the top. Installing the bottom channels into the concrete slab with RamSets took a little extra time but made it easy to keep the blocks perfectly aligned and held the blocks tightly in place top and bottom for the pour. This method does not require any common straps. The only wood or straps needed were at any large gaps between blocks (which were also foamed). 4’ vertical rebar was installed in the slab (or concrete footings) every 18”. 8’ vertical rebar was added from above once the ICF walls were in place. Horizontal rebar was added at each level of blocks as well as at each corner. The metal channels at the top of the ICF walls provided, in addition to strength and support, a smooth level base to use when leveling and smoothing the concrete for the top plate. This was the very first ICF build in our state for a HfH home. It received lots of media attention, support from the concrete manufacturers’ association, the ICF Mfg’s Assn, local suppliers, local and state government, and the ICF manufacturer who had an experienced employee on site to guide and train us. All construction is being done by volunteers under supervision of the local HfH construction manager.
After watching a few of your ICF basement videos and watching the contractor pour my basement the conventional way, I would not know why you wouldn't want an ICF basement the end result is so much better.
Costs, costs, costs.. There is a lot of work to do after the pour, both the outside and inside need to be finished before the house can pass inspection. Even if you aren't going to finish the basement as living space it needs to be sheetrocked and taped, because the foam is flammable. Also if you do research into energy efficiency you'll see that a lot of the icf companies make false or misleading claims of "R" value.
That was a "Dirt Perfect" explanation of the Pulmwall ICF bracing system. I'm sure their engineering department got to work in a hurry on those improvements that you recommended in this video.
It doesn't matter how many Engineers, designers, and company personnel put their heads together to design a product. They will never be able to cover every scenario and detail outside the real world applications. Allowing contractors like Mike to real world test them and give their inputs on the positives and negatives is where the flaws and improvements will certainly come to light. An absolute must for the companies to take their awesome products and improve. The welds where the adjustment bolts and the sharp edges/screw holes of the rails is a simple quality issue that is easily fixed. It's the little details that are missed in production that the in the field users notice. Plumwall is certainly on the right track and feel they will certainly make improvements based on Mike's honest and technical review.
I had the opportunity to work on this job with @DirtPerfect and the rest of the awesome crew. Gotta say couldn't ask for a better crew to work with and working with the Plumall braces compared to older braces that I've worked with on previous construction jobs was a lot better and alot easier to manage and work with, other than smashing my fingers a few times on getting them opened up...lol... they are alot better. Matt, Kleeman, Aaron and the ICF walls and other equipment I worked with was a pleasure. Thanks again @DirtPerfect for the opportunity to work with you on this job and other jobs! If your in our area and looking for awesome work done with pride and top of the line craftsmanship Dirt Perfect is the one to call.
Excellent review, great feedback for the manufacturer to absorb and hopefully tweak - they seem like easy mod's. I like the fact that the adjustment threads are protected from concrete spills too! :)
They should make corner braces. Especially for outside corners. Not only would it hold the wall up but it would hold it straight and plumb. An inside corner would need the brace on the outside and that could be a little tricky to support.
So basically, if your child loves playing LEGO'S, you would advise encouraging it based on what you just showed us. WOW! This video seems very useful as a 'training video' for PLUMWALL personnel or customer base. You seem to know the product well and they seem to work well. Nice when people can THINK! Thanks. Sonny (CT)
Nice honest review of plumwall. Looking forward to the pour for final thoughts. I'm not even a builder nor ever have been one. Really enjoy your channel,the banter between all the guys from small town usa. You guys are what make America great. Guess I have too much time on my hands but it's okay I'm retired.
Nice job showing and explaining the new supporting system. Very detailed and based on use Look forward to the poor Merry Christmas Bruce from Mason Michigan
Nice video, thanks for sharing. I’ve been a fan of the ICF since I first heard of them. Have spent many random hrs checking out the many different brands of ICF and accessories web pages. Looking forward to seeing you build a multi level building some day. Merry Christmas, wishing you and your family the best.
You'd have loved stacking my house. There isn't a parallel wall in the house. I had a surveyor lay it out with a total station, but they did not do well. I ended up pulling points with multiple tape measures. It seemed like a simple thing to do as the house is comprised of 17 8 foot wall segments, each 21.176 degrees apart. In Autocad, I would have done a circular array. Very simple, tell Autocad to array the walls around a point and divide 360/17. The connector between the house and garage which is a rectangle, were easy. It took me a week to stack the house, an afternoon to stack the garage. And this was my first time using ICF's. I was fortunate that the crew I hired to pour my basement had bracing. They were a few pieces short for my needs but I located those. You're talking about Zuckles and Zonts. I looked at them and had I not been able to source the bracing, I would have gone that route. For my Bucks, I used 3/4" Treated plywood and treated 2x4's. I ripped the 2x4s on a30 Degree angle and screwed the plywood to them. The angle cut created a key in the concrete. I know you don't, buy my crew vibrated the forms with a pencil vibrator. No blowouts. I had. s stepped footing from the house to the garage. The hole is rock so the forms follow the rock. I used plywood and foam to fill the gap that was created. It appears the system I used was "Paneljack". My foot stakes were in rock. I had to drill every pin. I used 3/4" nail stakes.
Unless the instrument operator follows best practice, to the letter, the instrument error will get fairly high after ten points or so. Depending if it is 15 seconds or less. Doubling the angles gives much much better accuracy. But always, best practice RULES. Merry Christmas and Happy New Year to all
Merry Christmas to you and the whole crew!!🎄🙏 Thanks to all of you for a great year! Keep it going strong and enjoy your holidays!! 🎁 can't wait for 2021!
As always you Sr. did a Dirt Perfect job explanation on this system, I have been in the Material Testing Bus. for over 45 years, the first ICF i saw used was over 30 years ago in Orlando, i liked it then and believe it should be use more, seen Cells up to 12" wide and they used a lot of 2x4's and plywood on the bracing, lots of concrete and Re-bar, keep up the great work Mike, looking forward to the video.
Wow I’ve been looking into getting started with icf walls as part of my business but I kept looking the other but this video by far the best I’ve seen online lots of great info
Just because of who you are we will see the improvements in the areas that you point out. :) Thank you for the video and have a safe and happy holiday.
Pretty cool seeing how far things have come and the new tools you have available. At a pretty penny I’m sure. Lol. Enjoying the diversity of your content in the handful of videos I’ve watched. Thinking back I guess that’s one of the things I’ve always liked about Chris and Brandon’s videos that kept me coming back. Never know what kinda mess they’ll be getting into. Lol. Take care Mike
1) Merry Christmas & Happy New Year to you and yours DP! 2) I'm 65 now and not a fellow Dirt person, never will be. I like watching your videos because you are the folks who take a site to the point where a building can definitely be built. Foundation laid, septic system set up. Thank you for showing how you do that at all sorts of sites. I have some ICF questions I'll put in follow up comments.
From some of the comments here I take it that variants of ICF have been around for longer than I thought, up to 30 years! Question: how is the external styrofoam protected from people on the inside and chewing varmints on the outside? Picking at styrofoam can be allmost as addictive as popping bubble wrap bubbles!
@@DirtPerfect Sure, would love to see a video on it! When I showed someone a video introducing ICF, that was his ? Your vids were the first I've seen putting it in aside from the manufacturer's video.
Very interesting and well done review. I watched the whole thing, even though I'm not sure I've ever even been inside of a house with a basement. Merry Christmas to you and yours!
Been waiting for this video. I believe the pros outway the cons based on your opinion. It is amazing how similar we do builds with different block companies. Thanks for the informative video. Stay safe
Happy Christmas Mike and crew and family, you deserve far more subs, really enjoy your postings, you come across as a very affable man. best wishes from the UK.
Never messed with ICF and never used a brace like it, but everything you said made sense to me. Plumwall had an ad at the end of your video and it looked like they tried to make the foot so you could stake or bolt it down in just about anyway possible.
These ICF walls are amazing to me. The ease at how they go up. How easy it is to get plum with these new wall braces. I set quite a few what is called pre-fab concrete basement walls. They are a pre-poured wall 6" thick concrete that has 2" foam on each side, usually 10ft tall was standard. Using a 100ton crane to set each in place. Corners are held together with 1" dia. 18" long lag screws. Its either those or traditional cement block walls up here in this area. I can recall doing a 28'X68' ranch home with the pre-fab walls took 12hrs of crane time. the 28' walls were 1-piece and the 68' walls were 3-piece.
Very thorough review of the ICF system Mike. Looks like a well thought out program and with feed back like yours hopefully they will refine their product and make it even better. When you did the high speed adjustment section I noticed the screw blocks seemed to jam up a couple of times, on a big job that would definitely get frustrating in a hurry, especially after dried concrete starts gritting everything up. I suppose greasing up those areas would help keep it smooth, but then the grease gets on everything. Lol The life of form work. That system is sure a lot better than through ties and plywood strong back forms and so much lighter. Hahaha... Wall form technology has changed so much for the better, very impressive.
Mike another great video looks like a great bit of kit, looking forward to the pour video. Merry Xmas to the Family, you and the crew enjoy the festive season and come back refreshed from NZ.
I use bracing that is very similar. It's nice having the scaffolding and bracing integrated. Adjusting during the pour is easy. We always assign 1 to watch string and 1 to turning the adjusting leg. All hands on deck that day. Ya'll do a good job installing the forms. A lot of form manufacturers tell you in the instructions to not do vertical seams but the guy writing those doesn't understand that keeping the walls the exact same length top to bottom is much easier using a vertical splice. We use 18 inch strips of plywood over our splice and usually place a brace at that same point. Using Integraspec we pump 10 feet high all in one pass and never check up. Great video!
About 30 yrs ago I worked on a job using this material but we did the entire house. We had to frame out the windows and doors. And had to put ledges on the inside due to concrete floors on a 3 storie house. Reason being it was right on the water up north. It was for the Daughter of the owner of a major hardware chain. And money was no object. First time we ever used it. Used the hot wire knife to cut what was needed. On top of that was a metal roof.
Mikey... as mouse traps go... Plumwall seems to be doing rather darn well in the competition to build the better one. Hopefully, the mice take the bait and are captured securely... can hardly wait for you to spring the trap and see what you catch! Have a Merry Christmas!
Great and informative video, I do not do house building myself, but in the corner where there was no room for two brackets, could you have adjusted one of them down in height so they went clear of each other?
Wow...! Mike great video. "Plumbwall" could have sent a guy-gal/rep., out to be on site for this set-up (course they would no doubt had to have been quarantined for 14-days prior). I have watched all your "ICF" set-up & pours, and wondered what was involved with resetting the walk ways for each level of concrete. This system is sure gonna streamline your labor & time for sure. Your video will give them great feed back (i.e., those "footplate" issues you pointed out). Those "Canuks" folks make some pretty awesome equipment. My experience with them has only been snowblowers that mount on tractors, and they are the go to for those. I am sure looking forward to the "pour-day" video. Thank you sir.
I can already tell you had problems keeping the brace footing from twisting. They need to add the rebar hole directly behind the leg of the brace. You could kill two birds with one stone, by having MBTS weld a plate in the 2x4 hole with a 1"hole in the center. It would double the thickness of the flimsy bracket and put the anchor dead center of the brace. GL Dirt (better than) Perfect!
Seems like a great system designed with Canadian ingenuity. Glad to see your critiques were prefaced with the caveat that you are a rookie with the system and they may play out okay in the long run. I’ve seen RUclipsrs absolutely slam an item but in the end everything was okay because their comment was purely observational without actually using the item yet. I’m sure it’s all okay. Mainly because you’ve already talked about them quickly in other videos. 😉
I’m no builder never have been and at 73 never will be but I really enjoy your videos and your review of the product. Many thanks DP.
Thanks Jim
I am in about the same boat. The value I find in these videos is if the day comes and you need a contractor for work like this, and don't live where you can cal DP, at least you have some idea of what should be done when a contractor tells you what he plans.
We poured the walls today on an ICF build for a HfH house using Plumwall braces and a different brand of ICF blocks. The braces are a quick, easy 2 man install but does have potentially sharp edges on the upright piece where you insert the screws. There are also pinch points that could be painful if not paying attention during install. The large adjustment bolts make it very easy and quick to level & plumb the ICF wall. We installed the braces after the 8’ walls were all in place.
Each brand of ICF blocks has its advantages and disadvantages. The one we used were set into metal channels on the inside and outside of the blocks, both at the bottom and the top. Installing the bottom channels into the concrete slab with RamSets took a little extra time but made it easy to keep the blocks perfectly aligned and held the blocks tightly in place top and bottom for the pour. This method does not require any common straps. The only wood or straps needed were at any large gaps between blocks (which were also foamed).
4’ vertical rebar was installed in the slab (or concrete footings) every 18”. 8’ vertical rebar was added from above once the ICF walls were in place. Horizontal rebar was added at each level of blocks as well as at each corner. The metal channels at the top of the ICF walls provided, in addition to strength and support, a smooth level base to use when leveling and smoothing the concrete for the top plate.
This was the very first ICF build in our state for a HfH home. It received lots of media attention, support from the concrete manufacturers’ association, the ICF Mfg’s Assn, local suppliers, local and state government, and the ICF manufacturer who had an experienced employee on site to guide and train us. All construction is being done by volunteers under supervision of the local HfH construction manager.
After watching a few of your ICF basement videos and watching the contractor pour my basement the conventional way, I would not know why you wouldn't want an ICF basement the end result is so much better.
I agree
Costs, costs, costs.. There is a lot of work to do after the pour, both the outside and inside need to be finished before the house can pass inspection. Even if you aren't going to finish the basement as living space it needs to be sheetrocked and taped, because the foam is flammable.
Also if you do research into energy efficiency you'll see that a lot of the icf companies make false or misleading claims of "R" value.
That was a "Dirt Perfect" explanation of the Pulmwall ICF bracing system. I'm sure their engineering department got to work in a hurry on those improvements that you recommended in this video.
Thanks
It doesn't matter how many Engineers, designers, and company personnel put their heads together to design a product. They will never be able to cover every scenario and detail outside the real world applications. Allowing contractors like Mike to real world test them and give their inputs on the positives and negatives is where the flaws and improvements will certainly come to light. An absolute must for the companies to take their awesome products and improve. The welds where the adjustment bolts and the sharp edges/screw holes of the rails is a simple quality issue that is easily fixed. It's the little details that are missed in production that the in the field users notice. Plumwall is certainly on the right track and feel they will certainly make improvements based on Mike's honest and technical review.
I watch all your videos and manage to learn one or two things each time You are going to make a talented and wise old man when you get older.
Lol thanks
Nothing more enjoyable than working with quality materials and the best of tools!
Yup
Never heard the start of the tape measure called the "dummy end" before. Perfect.
😁
I had the opportunity to work on this job with @DirtPerfect and the rest of the awesome crew. Gotta say couldn't ask for a better crew to work with and working with the Plumall braces compared to older braces that I've worked with on previous construction jobs was a lot better and alot easier to manage and work with, other than smashing my fingers a few times on getting them opened up...lol... they are alot better. Matt, Kleeman, Aaron and the ICF walls and other equipment I worked with was a pleasure. Thanks again @DirtPerfect for the opportunity to work with you on this job and other jobs! If your in our area and looking for awesome work done with pride and top of the line craftsmanship Dirt Perfect is the one to call.
Appreciate the help buddy have a good Christmas
This video brings up a memory of me and my dad watching home on Holmes and talking about a Thermal break
Yup remember that show
Good show I liked it
Great info on the new bracing. Contractors really need to watch your video on Pulmwall bracing system.
W
I’m ready to add ICF to our scope of work after watching this video!
Good deal
Excellent review, great feedback for the manufacturer to absorb and hopefully tweak - they seem like easy mod's.
I like the fact that the adjustment threads are protected from concrete spills too! :)
Thanks and yes I agree
They should make corner braces. Especially for outside corners. Not only would it hold the wall up but it would hold it straight and plumb. An inside corner would need the brace on the outside and that could be a little tricky to support.
So basically, if your child loves playing LEGO'S, you would advise encouraging it based on what you just showed us. WOW! This video seems very useful as a 'training video' for PLUMWALL personnel or customer base. You seem to know the product well and they seem to work well. Nice when people can THINK! Thanks. Sonny (CT)
Lol yes
Nice honest review of plumwall. Looking forward to the pour for final thoughts. I'm not even a builder nor ever have been one. Really enjoy your channel,the banter between all the guys from small town usa. You guys are what make America great. Guess I have too much time on my hands but it's okay I'm retired.
Paul appreciate that
YAY the Captain makes an appearance again 😁. There is a lot of work setting all of that up!
Another "Perfect" day
Thanks
Another great video Mike. Learned something new today about ICF and the braces.
Awesome thanks
Nice job showing and explaining the new supporting system. Very detailed and based on use
Look forward to the poor
Merry Christmas
Bruce from Mason Michigan
best video yet on doing icf walls
Thanks
You would make a great salesman. Good video.
Lol thanks mike
Looking forward to seeing how these braces handle the concrete pour.
Really well till it don't ... then again I've seen 5/8 plywood blowout.
Nice video, thanks for sharing. I’ve been a fan of the ICF since I first heard of them. Have spent many random hrs checking out the many different brands of ICF and accessories web pages. Looking forward to seeing you build a multi level building some day. Merry Christmas, wishing you and your family the best.
Thanks for the excellent advice. Very good video makes my day to watch yall. Merry Christmas hope u are blessed
Looks like a good system, seems a lot better than what you had before.
I guess time will tell if the foot pieces will hold up. Stay safe boys.
Very thorough and understandable ICF primer. Thanks!
Boning Rods are what we used to use to get our levels in the sixties, the same tools the ancient Egyptians used to build the Pyramids.
Wow Dirt Perfect going all nerd on us now 🤣 great explanation of how they work as I had no idea but feel more knowledgeable about them now thanks DP 👍
Thanks
You'd have loved stacking my house. There isn't a parallel wall in the house. I had a surveyor lay it out with a total station, but they did not do well. I ended up pulling points with multiple tape measures. It seemed like a simple thing to do as the house is comprised of 17 8 foot wall segments, each 21.176 degrees apart. In Autocad, I would have done a circular array. Very simple, tell Autocad to array the walls around a point and divide 360/17. The connector between the house and garage which is a rectangle, were easy. It took me a week to stack the house, an afternoon to stack the garage. And this was my first time using ICF's. I was fortunate that the crew I hired to pour my basement had bracing. They were a few pieces short for my needs but I located those. You're talking about Zuckles and Zonts. I looked at them and had I not been able to source the bracing, I would have gone that route. For my Bucks, I used 3/4" Treated plywood and treated 2x4's. I ripped the 2x4s on a30 Degree angle and screwed the plywood to them. The angle cut created a key in the concrete. I know you don't, buy my crew vibrated the forms with a pencil vibrator. No blowouts. I had. s stepped footing from the house to the garage. The hole is rock so the forms follow the rock. I used plywood and foam to fill the gap that was created. It appears the system I used was "Paneljack". My foot stakes were in rock. I had to drill every pin. I used 3/4" nail stakes.
Unless the instrument operator follows best practice, to the letter, the instrument error will get fairly high after ten points or so. Depending if it is 15 seconds or less. Doubling the angles gives much much better accuracy. But always, best practice RULES.
Merry Christmas and Happy New Year to all
I really like those wall brace's DP....Cant wait for the next vid to see how it go's mate....🦘🦘👌👌
Merry Christmas to you and the whole crew!!🎄🙏
Thanks to all of you for a great year! Keep it going strong and enjoy your holidays!! 🎁 can't wait for 2021!
Thanks for explaining about the braces very interesting. I think you will like them just as much as your speed binders.
Very Good instructions
should be a sales man on the braces . loved the 10 year old blue print drawings lol
Thanks
Thanks for the education on the Plumwall system Mike - Merry Christmas to you and family...
As always you Sr. did a Dirt Perfect job explanation on this system, I have been in the Material Testing Bus. for over 45 years, the first ICF i saw used was over 30 years ago in Orlando, i liked it then and believe it should be use more, seen Cells up to 12" wide and they used a lot of 2x4's and plywood on the bracing, lots of concrete and Re-bar, keep up the great work Mike, looking forward to the video.
Very informative video. Thanks and Merry Christmas 🎄
W
Wow I’ve been looking into getting started with icf walls as part of my business but I kept looking the other but this video by far the best I’ve seen online lots of great info
Thanks and I have several others as well
Just because of who you are we will see the improvements in the areas that you point out. :) Thank you for the video and have a safe and happy holiday.
Thanks
MERRY CHRISTMAS to you and your family and crew. God bless.
Thanks
Amazing how the ICF's take all that weight. Great job guys! Merry Christmas!
Pretty cool seeing how far things have come and the new tools you have available. At a pretty penny I’m sure. Lol. Enjoying the diversity of your content in the handful of videos I’ve watched. Thinking back I guess that’s one of the things I’ve always liked about Chris and Brandon’s videos that kept me coming back. Never know what kinda mess they’ll be getting into. Lol. Take care Mike
Mike, that was an awesome review. Very fair and honest, not to mention professional. Great video as well. Merry Christmas.
Thanks buddy
1) Merry Christmas & Happy New Year to you and yours DP! 2) I'm 65 now and not a fellow Dirt person, never will be. I like watching your videos because you are the folks who take a site to the point where a building can definitely be built. Foundation laid, septic system set up. Thank you for showing how you do that at all sorts of sites. I have some ICF questions I'll put in follow up comments.
From some of the comments here I take it that variants of ICF have been around for longer than I thought, up to 30 years! Question: how is the external styrofoam protected from people on the inside and chewing varmints on the outside? Picking at styrofoam can be allmost as addictive as popping bubble wrap bubbles!
That’s a good ? and hard to answer several different way to go about that may be. Video idea
@@DirtPerfect Sure, would love to see a video on it! When I showed someone a video introducing ICF, that was his ? Your vids were the first I've seen putting it in aside from the manufacturer's video.
You really take your work seriously and do a great job. You do it like your own house or property. A very great crew! Like your channel
Thanks John
great vid that was the reason i got out of doing icf in the 90s the bracking was such a pain i went back to steel forms
Thanks
Very interesting and well done review. I watched the whole thing, even though I'm not sure I've ever even been inside of a house with a basement. Merry Christmas to you and yours!
Thanks Dan
Very interesting video a lot of good information and your honest opinion
Thanks
Great job
Merry Christmas to you, your family and all.
God bless.
Thanks
Been waiting for this video. I believe the pros outway the cons based on your opinion. It is amazing how similar we do builds with different block companies. Thanks for the informative video. Stay safe
Thanks and yes If I was going to buy new braces would be these for sure
I got my hat and stickers today! Thanks for getting them to me so quick. Merry Christmas to you all!
Awesome
Happy Christmas Mike and crew and family, you deserve far more subs, really enjoy your postings, you come across as a very affable man. best wishes from the UK.
Thanks
A Merry Christmas to you, your family, and your protagonists. Stay safe and keep the camera rolling!
Thanks Sam
Never messed with ICF and never used a brace like it, but everything you said made sense to me. Plumwall had an ad at the end of your video and it looked like they tried to make the foot so you could stake or bolt it down in just about anyway possible.
Merry Christmas to you and your family
Thanks
Hope you and your family had a great Christmas!!
Thanks
As a Canadian I’m glad to hear you like and would buy a Canadian product.
You build a lot of cool houses
Thanks
Mike, you definitely have a great crew.
Yes I do very lucky
Merry Christmas to u and ur employees and family. Great video buddy great information too. Looks like they will work great. Thank u very much Mike.
Thanks Michel
These ICF walls are amazing to me. The ease at how they go up. How easy it is to get plum with these new wall braces. I set quite a few what is called pre-fab concrete basement walls. They are a pre-poured wall 6" thick concrete that has 2" foam on each side, usually 10ft tall was standard. Using a 100ton crane to set each in place. Corners are held together with 1" dia. 18" long lag screws. Its either those or traditional cement block walls up here in this area. I can recall doing a 28'X68' ranch home with the pre-fab walls took 12hrs of crane time. the 28' walls were 1-piece and the 68' walls were 3-piece.
Great video with lots of good content. Thanks for sharing. Kevin
Thanks Kevin
Very thorough review of the ICF system Mike. Looks like a well thought out program and with feed back like yours hopefully they will refine their product and make it even better. When you did the high speed adjustment section I noticed the screw blocks seemed to jam up a couple of times, on a big job that would definitely get frustrating in a hurry, especially after dried concrete starts gritting everything up. I suppose greasing up those areas would help keep it smooth, but then the grease gets on everything. Lol The life of form work. That system is sure a lot better than through ties and plywood strong back forms and so much lighter. Hahaha... Wall form technology has changed so much for the better, very impressive.
I really like the design
Me to
Merry Christmas to you and your family the more I c the ifc basement it nicer than a block basement
Awesome Job!!
Enjoyed buddy . You run a tight job site . Thanks for showing.
Thanks Gary
Been waiting for this video.
Hope it didn’t disappoint
Very informative even though I don't that kind of work
Merry Christmas to you and yours sir
Thanks
Looks great buddy merry Christmas and god bless everyone
Thanks
Mike another great video looks like a great bit of kit, looking forward to the pour video. Merry Xmas to the Family, you and the crew enjoy the festive season and come back refreshed from NZ.
Thanks Barry
...great one, have a good week..
Thanks
Wonderful work thank you for the video. :)
Thanks
Merry Christmas
Great explanation.
Thanks
Merry Christmas. Starting off with metal music. Must have missed the Pepsi this am
great content Mike!
Allen
I like the fact they lean into the whole Plum color thing as well.
Lol yup
👍 You Tube magic sure does make it look easy. Thanks for the vid.
Nice job, sometimes old ways are better then electronics.
Merry Christmas to your family.
Mike just showed the brace company how to make so many improvements to a already good product.
Interesting video Mike!
Thanks
I use bracing that is very similar. It's nice having the scaffolding and bracing integrated. Adjusting during the pour is easy. We always assign 1 to watch string and 1 to turning the adjusting leg. All hands on deck that day. Ya'll do a good job installing the forms. A lot of form manufacturers tell you in the instructions to not do vertical seams but the guy writing those doesn't understand that keeping the walls the exact same length top to bottom is much easier using a vertical splice. We use 18 inch strips of plywood over our splice and usually place a brace at that same point. Using Integraspec we pump 10 feet high all in one pass and never check up. Great video!
Yup exactly and thanks
Loving the funky music 🎶 DP 👌 💯 😎
Thanks
I've said it before. This has to be one of the best ways to make a basement wall. Styrofoam as insulation and reinforced concrete as load-bearing.
Yup i agree
Fit and finish, the make or break of any product!
👍🇳🇱 .
Merry Christmas and a Happy New Year for you and the fam
Thanks
They look great only thing I b worries about is something getting in rails during pour
I know you filmed this months ago. But great video. MERRY CHRISTMAS TO ALL THE DRT PERFECT FAMILY.
Thanks
Merry Christmas to whole family
Thanks
Enjoy watching your videos, You should create playlist of the #ICF
Good idea thanks
About 30 yrs ago I worked on a job using this material but we did the entire house. We had to frame out the windows and doors. And had to put ledges on the inside due to concrete floors on a 3 storie house. Reason being it was right on the water up north. It was for the Daughter of the owner of a major hardware chain. And money was no object. First time we ever used it. Used the hot wire knife to cut what was needed. On top of that was a metal roof.
Yup built over. 100 of them that way
It seems you like some of the things built here in Canada,, thank you
Mikey... as mouse traps go... Plumwall seems to be doing rather darn well in the competition to build the better one. Hopefully, the mice take the bait and are captured securely... can hardly wait for you to spring the trap and see what you catch!
Have a Merry Christmas!
Cool video!
Thanks
Great and informative video, I do not do house building myself, but in the corner where there was no room for two brackets, could you have adjusted one of them down in height so they went clear of each other?
Yes, it could physically be done, except then the support for the walkway used during the pour is not there.
Hi there, Here is wishing you and all your family a very merry Xmas and a happy new year.Fred UK.
Thanks Fred
Wow...! Mike great video.
"Plumbwall" could have sent a guy-gal/rep., out to be on site for this set-up (course they would no doubt had to have been quarantined for 14-days prior).
I have watched all your "ICF" set-up & pours, and wondered what was involved with resetting the walk ways for each level of concrete. This system is sure gonna streamline your labor & time for sure.
Your video will give them great feed back (i.e., those "footplate" issues you pointed out). Those "Canuks" folks make some pretty awesome equipment. My experience with them has only been snowblowers that mount on tractors, and they are the go to for those.
I am sure looking forward to the "pour-day" video.
Thank you sir.
Think they would have if not for COVID
Dirt Perfect
Yep probably. Bout only thing coming out of there at this point is building materials (wafer board type sheeting)... Crazy, crazy...
I can already tell you had problems keeping the brace footing from twisting. They need to add the rebar hole directly behind the leg of the brace. You could kill two birds with one stone, by having MBTS weld a plate in the 2x4 hole with a 1"hole in the center. It would double the thickness of the flimsy bracket and put the anchor dead center of the brace. GL Dirt (better than) Perfect!
Or, just make new feet to accommodate the rebar. Then you have both.
Merry Christmas everyone!!
W
Seems like a great system designed with Canadian ingenuity.
Glad to see your critiques were prefaced with the caveat that you are a rookie with the system and they may play out okay in the long run. I’ve seen RUclipsrs absolutely slam an item but in the end everything was okay because their comment was purely observational without actually using the item yet.
I’m sure it’s all okay. Mainly because you’ve already talked about them quickly in other videos. 😉
Lol 😝 and yes I do agree