Good Video, i have the same Soundbar but my Problem is when i use this Box in Standard soundmode everything works fine but when i change it to adaptive or Surround the top speakers are meaking very wierd noise the sound comes out like muffled and loud rushes i think it has what can i do? Thanks for the videos and greetings fron Germany
Thank you my friend, have you tried the reset? If this is not possible, in this case you will have to open or check the sunrroud drivers, but to open the box where the drivers are you have to disassemble the entire soundbar and peel off the box where the drivers are, dividing it into two parts.
Esto no te lo puedo mostrar porque está dentro de la caja con los parlantes pero el ambiente funciona como una flauta, tiene un tubo con varios orificios en diferentes tamaños desde el más pequeño al más grande y el woofer (creo que es un tweeter) en un extremo haciendo que el sonido se multiplique.
Great video. I have almost the same model HW-Q800A/EN and after almost 2,5 years of using, the connection with the woofer stop sundenly. I tried everythink to pairing both but nothing happend. Even the update via usb didn't work even the soundbar was already upgraded beginning of this year. The reinitialisation also didn't work/start. I think I have to change the wireless module of the soundbar. Is the wireless module out or in the mainboard? What do you think? I'm quite lost with this problem. Tkanks to all if somebody had the same problem for helping me please. Greetings from Belgium.
Hello my friend, the board is connected with a flat cable, there is a board connected to the main board and another board connected to the subwoofer main board, one of them has a problem, you can also try disconnecting the flat cables (from the bar and subwoofer) and then connect them again, sometimes this already solves the problem.
@@robsonbraun Thank you very much Robson for your explanation and advice, so the wifi card is external to the mainboard. Good news. Tomorrow I'm going to follow your advice to disconnect and reconnect the sub and soundbar cables. Could this also block the reset of the bar this bad connection of cables? Thanks again for your help.
@@Olivier-Ferrari As for the reset, it doesn't always work, especially with these cards, if you have any questions, just ask and I'll do my best to help.
Hi :) Could you explain how to remove the interior from the sub-buffer? I've unscrewed 6 screws, but I can't seem to pull it out. I've watched a video, but I can't imagine how to shift it to make it removable.
After unscrewing it, just pull it with the help of a blade at the ends, if you want to remove the woofer in this case you have to first remove the protective screen which takes a little work as it is glued.
Hey Bro...if I lost wifi connection and soundbar couldn't pair bluetooth, what board should I replace? How many circuit board in this soundbar? Thank you.
There is a plate on the subwoofer and another like it with the same specification, generally only one gets damaged and the most likely to have damaged is the one inside the subwoofer due to the impact and vibrations caused by the subwoofer, test it and replace it, if it doesn't work Then you have to change the one on the soundbar.
Unfortunately I can't because the atmospheres are in the form of a tube with holes (in the shape of a flute) and are embedded inside the box, I believe that it's not speakers but Tweeter that makes this acoustic.
I was about to buy this then I came to know it doesn't have the upward firing speaker. So I dropped the plan to buy this and looking for a good av receiver. Thanks for dismantle Robsen...
Blz meu amigo, cara pra tirar a grade tem que desmontar o fundo retirando todos os parafusos e depois a grade tem um monte de travas q são amassadas para prender a msm, pra mim não compensa pois da muito trabalho e como as travas são amassadas para prender na hora de montar novamente e difícil ficar novamente do msm jeito que estava, pra limpar eu sugiro a usar um pincel e um soprador (pode ser até um secador de cabelo (sem a função de esquentar)
@@robsonbraun Grato pelo rápido retorno e atenção amigo! é que comprei usada e simplesmente está muito suja, mesmo passando a escova não saiu entende? Como não dá pra saber o que há por baixo da grade não sei se posso passar um limpa contatos ou WD, o que sugere neste caso para tentar limpar sem abrir então? Obrigado!
@@cícerojr4p escova na e adequado, o ideal e um pincel, e para melhor eficaz vc pode usar um pouco de água e detergente pra molhar um pouco o pincel e passar na grade para fazer essa higienização.
Hi Sir! I have an samsung q800a en subwoofer . the 5.1 in adaptive mode (the center speaker sound is low, sometimes ok), after 1 year dont work, just in 2.1. i tried the reset, and the firmware is 1011 ok. subwoofer is ok, just the center speaker is the problem (im in Europe) please help me (i dont have warranty)
In this case you will have to open the soundbar and remove the speaker to test, generally the central one is paired with a tweeter, an easier way without the need to disassemble everything to do the test and remove the bottom look for the speaker connector that Go to the board, with the help of a cell or low current battery you can emit a noise in the speaker and with this you can test to check if it is emitting sound.
Unfortunately, each model changes the circuits, this service also requires good knowledge in electronics to perform, but in the future I intend to choose a model to make this modification.
It’s definitely made well, but the subwoofer is way too weak. They should fix that to make it a really good soundbar system. Vizio seems to be a lot better.
Yes brother, I believe that the new 2022 soundbars will be better because they will come with a passive radiator and I think that will make a big difference, but I also believe that this subwoofer box could have a stronger sound if its shape was not so rectangular, I think that hurt a little. Thanks for watching the video, if you are not already subscribed to the channel, please write, it will help me to show more boxes like this
I had a problem with the subwoofer power supply board with parts blown out. Can you please help me to check what is the part number of ICM801CS near the transformer. Thank you.
bhaee, yahaan braazeel mein aap ise ilektroniks mein bahut aasaanee se praapt kar sakate hain, bhaarat mein mujhe yakeen nahin hai ki aap ise kahaan pa sakate hain.
Please tell me which model of audio transceiver is installed in the subwoofer. Mine is not working and may be installed incorrectly. It is installed under the sound amplifier board of the subwoofer. You need to unscrew the plastic from the power supply and amplifier. You don't have that in the video.
Unfortunately I don't have a video like this yet, but you have to use the plate from your old sub, (if you have the Q800a and want to install the Q800c you have to remove the plate from the Q800a and install it in the Q800c, there is an inscription on the channel that had the Q600b and using this procedure he installed his Q800a nabsoundbar Q600b.
@@robsonbraun I got the Q800A but the subwoofer doesn't connect. At the same time, the subwoofer connected to the Q600A. I removed the plate from the Q600A and put it in the Q800A, but it didn't help. The plate in the Q600A is smaller in size. Perhaps you need a plate in the sub, then it will work. Did I understand you correctly? but I need to clarify the plate number for the Q800 sub, maybe this is AH81-13849 FW: R X R1 S670?
@@АлександрТетеркин-д9л The board does not need to be exactly the same, just follow the size of the flat cable and its positioning (some boards work with an inverted cable) if it is not supposed to work, I believe there is some detail to adjust.
Thanks! this is a very important note about the flat cable! I will definitely check it out. Do you think that the AVM 100 and AVM 500 boards are compatible in the same pair?
@@АлександрТетеркин-д9л If it is the same cable, it is certainly the same board, you can check using a multimeter and measuring where the electrical currents enter.
@@sebaszapien para canciones con muy graves, la mejor barra de sonido es la klipsch 400 en esta categoría, pero la samsung también es muy buena y tiene un sonido muy creativo, pero los graves de la klipsch son únicos, no hay otra igual.
Please would you be able to tell me exactly where the upfiring or flute shaped speakers are situated..I have been searching for weeks with no luck..The reason is I would like to wall mount the spear under my TV and would like to know how far out the speaker needs to come so that the Dolby Atmos sound bounces off the ceiling and not off the TV...I please need to know if they situated back front or middle of speaker, and do they take up a lot of the speaker, or are they narrow....The main thing I'm trying to work out is how far in front of the TV do I need to place the sound bar...Sorry for all the questions, but I just can't seem to get the info, and cannot install my bar until I know
hello brother, the flata drives are located inside the speakers' acoustic box, for you to have access you would have to disassemble this box and it is very well sealed and it is very difficult to disassemble, that's why no one showed it because in this disassembly it can damage the box and its components, it's a big risk if you try to disassemble this part, I don't recommend doing that, any questions just ask and I'll do my best to help you.
Thank you for your reply...I don't want to disassemble....I want to mount it under my TV, but I would like you to please tell me exactly where the upfiring speakers are situated in the soundbar, so that when I mount my sound bar, I mount it far enough forward so that the upfiring speakers have a clear path to the ceiling, and not interfere with by the tv...I want to know please if it's closer to the front or the middle or the back....Thank you for your help🙏
@@protrader15 ok friend, they are located more in the center on the front and each one walking towards the ends of the bar, with the help of a flashlight or direct light you can see through the screen.
is up mein utkrsht gunavatta, bahut santoshajanak baas star hai, lekin adhikatam pradarshan praapt karane ke lie ise pharsh par aur adhimaanatah do deevaaron ke beech kone mein sthaapit kiya jaana chaahie.
unfortunately I couldn't because I have to do a very big disassembly, but I'll still try to do it in the next few weeks as I did with a subwoofer in another video.
Unfortunately this one I can't get anymore because I had to sell to join and buy another one to show on the channel, but the next one I'll do the complete disassembly.
Good Video, i have the same Soundbar but my Problem is when i use this Box in Standard soundmode everything works fine but when i change it to adaptive or Surround the top speakers are meaking very wierd noise the sound comes out like muffled and loud rushes i think it has what can i do? Thanks for the videos and greetings fron Germany
Thank you my friend, have you tried the reset? If this is not possible, in this case you will have to open or check the sunrroud drivers, but to open the box where the drivers are you have to disassemble the entire soundbar and peel off the box where the drivers are, dividing it into two parts.
I have the same problem... can u solved?
Me quedé con ganas de ver los parlantes (speakers) y como funcional el mecanismo de atmos (beam) de samsung, lo agradecería. Buen trabajo!
Esto no te lo puedo mostrar porque está dentro de la caja con los parlantes pero el ambiente funciona como una flauta, tiene un tubo con varios orificios en diferentes tamaños desde el más pequeño al más grande y el woofer (creo que es un tweeter) en un extremo haciendo que el sonido se multiplique.
Great video. I have almost the same model HW-Q800A/EN and after almost 2,5 years of using, the connection with the woofer stop sundenly. I tried everythink to pairing both but nothing happend. Even the update via usb didn't work even the soundbar was already upgraded beginning of this year. The reinitialisation also didn't work/start. I think I have to change the wireless module of the soundbar. Is the wireless module out or in the mainboard? What do you think? I'm quite lost with this problem. Tkanks to all if somebody had the same problem for helping me please. Greetings from Belgium.
Hello my friend, the board is connected with a flat cable, there is a board connected to the main board and another board connected to the subwoofer main board, one of them has a problem, you can also try disconnecting the flat cables (from the bar and subwoofer) and then connect them again, sometimes this already solves the problem.
@@robsonbraun Thank you very much Robson for your explanation and advice, so the wifi card is external to the mainboard. Good news. Tomorrow I'm going to follow your advice to disconnect and reconnect the sub and soundbar cables. Could this also block the reset of the bar this bad connection of cables? Thanks again for your help.
@@Olivier-Ferrari As for the reset, it doesn't always work, especially with these cards, if you have any questions, just ask and I'll do my best to help.
@@robsonbraun Thanks you're the best. Great Channel 👍👍👍
@@Olivier-Ferrari Thank you my friend.
Hi :) Could you explain how to remove the interior from the sub-buffer? I've unscrewed 6 screws, but I can't seem to pull it out. I've watched a video, but I can't imagine how to shift it to make it removable.
After unscrewing it, just pull it with the help of a blade at the ends, if you want to remove the woofer in this case you have to first remove the protective screen which takes a little work as it is glued.
Hey Bro...if I lost wifi connection and soundbar couldn't pair bluetooth, what board should I replace? How many circuit board in this soundbar?
Thank you.
There is a plate on the subwoofer and another like it with the same specification, generally only one gets damaged and the most likely to have damaged is the one inside the subwoofer due to the impact and vibrations caused by the subwoofer, test it and replace it, if it doesn't work Then you have to change the one on the soundbar.
@@robsonbraunthe brown or green board?
Please show us the Dolby Atmos speaker or upfiring speaker in this soundbar
Unfortunately I can't because the atmospheres are in the form of a tube with holes (in the shape of a flute) and are embedded inside the box, I believe that it's not speakers but Tweeter that makes this acoustic.
I was about to buy this then I came to know it doesn't have the upward firing speaker. So I dropped the plan to buy this and looking for a good av receiver. Thanks for dismantle Robsen...
Klipsch bar48 almayı planlıyordum ama samsung kalitesi daha iyi olduğunu anladım bu video sayesinde, video için teşekkürler👍
Evet kardeşim Samsung'un ses kalitesi ve yapım kalitesi mükemmel, kesinlikle tavsiye ederim. Sorularınız varsa sormanız yeterli, kanala abone değilseniz lütfen yazın çok işime yarayacak, teşekkür ederim....
@robsonbraun what do you think about sony soundbar..does it have lesser bass than samsung?
Por favor, gostaria de retirar a grade superior desta soundbar para realizar uma limpeza, só soltando os parafusos inferiores consigo solta-la?
Blz meu amigo, cara pra tirar a grade tem que desmontar o fundo retirando todos os parafusos e depois a grade tem um monte de travas q são amassadas para prender a msm, pra mim não compensa pois da muito trabalho e como as travas são amassadas para prender na hora de montar novamente e difícil ficar novamente do msm jeito que estava, pra limpar eu sugiro a usar um pincel e um soprador (pode ser até um secador de cabelo (sem a função de esquentar)
@@robsonbraun Grato pelo rápido retorno e atenção amigo! é que comprei usada e simplesmente está muito suja, mesmo passando a escova não saiu entende? Como não dá pra saber o que há por baixo da grade não sei se posso passar um limpa contatos ou WD, o que sugere neste caso para tentar limpar sem abrir então? Obrigado!
@@cícerojr4p escova na e adequado, o ideal e um pincel, e para melhor eficaz vc pode usar um pouco de água e detergente pra molhar um pouco o pincel e passar na grade para fazer essa higienização.
@@cícerojr4p não ah nada embaixo da grade que danifique, só não pode encharcar pq aí nessa caso pode danificar algo.
@@robsonbraun Tá legal, muito obrigado mais uma vez pela ajuda! 🙌🏽
Hi Sir! I have an samsung q800a en subwoofer . the 5.1 in adaptive mode (the center speaker sound is low, sometimes ok), after 1 year dont work, just in 2.1. i tried the reset, and the firmware is 1011 ok. subwoofer is ok, just the center speaker is the problem (im in Europe) please help me (i dont have warranty)
In this case you will have to open the soundbar and remove the speaker to test, generally the central one is paired with a tweeter, an easier way without the need to disassemble everything to do the test and remove the bottom look for the speaker connector that Go to the board, with the help of a cell or low current battery you can emit a noise in the speaker and with this you can test to check if it is emitting sound.
@@robsonbraunmaybe fw downgrade? 1009.2 worked good.
Sir request make a video on how can we convert a Above samsung wireless subwoofer into wired, please.
Unfortunately, each model changes the circuits, this service also requires good knowledge in electronics to perform, but in the future I intend to choose a model to make this modification.
@@robsonbraun Thanks we will wait for that video aggresively.
I also own samsung hw a670 5.1 Build quality 👌👌👌
sim meu amigo, sao muito bem construidos e com uma otima. qualidade sonora.
It’s definitely made well, but the subwoofer is way too weak. They should fix that to make it a really good soundbar system. Vizio seems to be a lot better.
Yes brother, I believe that the new 2022 soundbars will be better because they will come with a passive radiator and I think that will make a big difference, but I also believe that this subwoofer box could have a stronger sound if its shape was not so rectangular, I think that hurt a little. Thanks for watching the video, if you are not already subscribed to the channel, please write, it will help me to show more boxes like this
I own this and there is absolutely nothing wrong with the subwoofer. The key is using the app to set it up.
Bom dia amigo
Boa tarde amigão.
I had a problem with the subwoofer power supply board with parts blown out. Can you please help me to check what is the part number of ICM801CS near the transformer. Thank you.
Unfortunately I can't because I no longer have this soundbar.
@@robsonbraun How about the Samsung Q600b. I think it uses the same power board. Thank you.
@@bigmore8734 probably yes, but I don't have it anymore either, I bought it just to make the video and then resold it.
@@robsonbraun Thank you
Hy! , Dude can the grill of the subwoofer be removed?
Yes, you can, but the fastening pins are glued and can mark or damage a little, with the help of a spatula you can remove them.
@@robsonbraun Thanks! Just what i needed to know.
Does Q800A and Q950A have same subwoofer
Yes, they both share the same subwoofer.
@@robsonbraun Thanks for quick reply. Great work 👏
Sir mujhe apna soundbar ripeyar krana hai usaka patta kat gya hai kha milega
bhaee, yahaan braazeel mein aap ise ilektroniks mein bahut aasaanee se praapt kar sakate hain, bhaarat mein mujhe yakeen nahin hai ki aap ise kahaan pa sakate hain.
@@robsonbraun thanks sir
Please tell me which model of audio transceiver is installed in the subwoofer. Mine is not working and may be installed incorrectly. It is installed under the sound amplifier board of the subwoofer. You need to unscrew the plastic from the power supply and amplifier. You don't have that in the video.
Unfortunately I don't have a video like this yet, but you have to use the plate from your old sub, (if you have the Q800a and want to install the Q800c you have to remove the plate from the Q800a and install it in the Q800c, there is an inscription on the channel that had the Q600b and using this procedure he installed his Q800a nabsoundbar Q600b.
@@robsonbraun I got the Q800A but the subwoofer doesn't connect. At the same time, the subwoofer connected to the Q600A. I removed the plate from the Q600A and put it in the Q800A, but it didn't help. The plate in the Q600A is smaller in size. Perhaps you need a plate in the sub, then it will work. Did I understand you correctly? but I need to clarify the plate number for the Q800 sub, maybe this is AH81-13849 FW: R X R1 S670?
@@АлександрТетеркин-д9л The board does not need to be exactly the same, just follow the size of the flat cable and its positioning (some boards work with an inverted cable) if it is not supposed to work, I believe there is some detail to adjust.
Thanks! this is a very important note about the flat cable! I will definitely check it out.
Do you think that the AVM 100 and AVM 500 boards are compatible in the same pair?
@@АлександрТетеркин-д9л If it is the same cable, it is certainly the same board, you can check using a multimeter and measuring where the electrical currents enter.
Which screw driver did you use for this? This was not a tear down or disassembly.
The disassembly of this soundbar is very simple and can be done with a common philips screwdriver.
@@robsonbraun What are those round yellow colored screws. It is hollow. Is it even a crew? My soundbar HW-MS650 won't open.
@@jemb710 I don't know which screws you are mentioning, unfortunately I can't help you because I didn't disassemble this model you mentioned.
@@robsonbraun thnx anyway
@@jemb710 I appreciate it, any questions can ask that I will do my best to help you.
is it the code number white sticker on the speaker can different at each country? I live in an asian country
Yes, my friend, you can, but generally when it's made in China it's usually the same for everyone.
realmente tiene 5 bocinas en total la barra de sonido?
si, pero los dos canales atmos estan ocultos dentro de la flauta que esta encima de la barra.
@@robsonbraun ahhh que interesante, me recomiendas esta barra de sonido para escuchar música con mucho bass?
@@sebaszapien para canciones con muy graves, la mejor barra de sonido es la klipsch 400 en esta categoría, pero la samsung también es muy buena y tiene un sonido muy creativo, pero los graves de la klipsch son únicos, no hay otra igual.
Please would you be able to tell me exactly where the upfiring or flute shaped speakers are situated..I have been searching for weeks with no luck..The reason is I would like to wall mount the spear under my TV and would like to know how far out the speaker needs to come so that the Dolby Atmos sound bounces off the ceiling and not off the TV...I please need to know if they situated back front or middle of speaker, and do they take up a lot of the speaker, or are they narrow....The main thing I'm trying to work out is how far in front of the TV do I need to place the sound bar...Sorry for all the questions, but I just can't seem to get the info, and cannot install my bar until I know
hello brother, the flata drives are located inside the speakers' acoustic box, for you to have access you would have to disassemble this box and it is very well sealed and it is very difficult to disassemble, that's why no one showed it because in this disassembly it can damage the box and its components, it's a big risk if you try to disassemble this part, I don't recommend doing that, any questions just ask and I'll do my best to help you.
Thank you for your reply...I don't want to disassemble....I want to mount it under my TV, but I would like you to please tell me exactly where the upfiring speakers are situated in the soundbar, so that when I mount my sound bar, I mount it far enough forward so that the upfiring speakers have a clear path to the ceiling, and not interfere with by the tv...I want to know please if it's closer to the front or the middle or the back....Thank you for your help🙏
@@protrader15 ok friend, they are located more in the center on the front and each one walking towards the ends of the bar, with the help of a flashlight or direct light you can see through the screen.
Thank you for your advice Robson 🙏... I will definitely try see if I can see them using a flashlight 👍
Hi,the subwoofer is 8 or 10 inch ?
Thanks for comment !
cool friend, the subwoofer is 8 inches.
@@robsonbraun thanks friends...but I'm clueless.
Jbl bar 500 vs samsung Q800
Thanks for comment bro
💪👍
@@robsonbraun which one is better ?
Jbl bar 500 vs samsung Q800 ?
@@1r0n_w0lf The JBL BAR 500 is better, it has a huge improvement over the previous model (sunround 5.1)
@@1r0n_w0lf Bar 500
Subwoofer ka please boliye milega kya 24 lines ka
is up mein utkrsht gunavatta, bahut santoshajanak baas star hai, lekin adhikatam pradarshan praapt karane ke lie ise pharsh par aur adhimaanatah do deevaaron ke beech kone mein sthaapit kiya jaana chaahie.
Sir muje ek strif chaye
What's inside look in LG SN6Y sound bar
Please
I will do my best to show my friend.
What's inside look in LG SN6Y sound bar
Why didnt you show any of the drivers? :)
unfortunately I couldn't because I have to do a very big disassembly, but I'll still try to do it in the next few weeks as I did with a subwoofer in another video.
@@robsonbraun okey thank you
Sony HT-S 400 ka inside video bana
For what is this switch inside the subwoofer
key? Explain better, I don't understand.
So how many drivers?
Sorry unfortunately I can't show it, next time I'll show it in full.
bro tear down the samsung t70 the all new party tower
At the moment this model is not yet available here for my region.
Can you make another video for whats inside the soundbar and speakers they put in?
Unfortunately this one I can't get anymore because I had to sell to join and buy another one to show on the channel, but the next one I'll do the complete disassembly.
Waste of money 🙈
Can you please give model no of subwoofer speaker ...
Unfortunately I can only provide you with the 8'' Inch size
SUBWOOOOOOF
It is possible to change high watt subwoofer instead of Samsung subwoofer
@@aks3272 i was looking for this option. How to change to better subwoofer?
What's inside look in LG SN6Y sound bar
I will do my best to show my friend.
@@robsonbraun thanks you so much sir thanks....
What's inside look in LG SN6Y sound bar
What's inside look in LG SN6Y sound bar