Triggered me incredibly hard at the start. With XL2566K it's just a single button click from the S-witch to get DyAc+ and a more bright game profile. Where as with ASUS monitors, two button presses to get ULMB2 on and 3 more to get the correct profile 💀
@@hausgaming I'm not the market for these ultra monitors...but honestly if I was looking at spending $ like that for 500hz I'd probably just grab Zowies new one that's coming.
@@ching8733I just watched a video about Oled tech and it is really promising. I wonder if what you are referencing is the oled tech where they will stack 2 oled panels on top of eachother allowing them to increase the lifespan of the pixels by 4x and decrease burn in by dropping the power per pixel. With a double layer panel, I assume the pixels could be organized in a manner where you can have all of them on at the same time for 4k res, or have them handle every other frame for 1080p 480hz. If this works well maybe they will even be able to do 4 panel layers and quickly jump to a monitor that offers 1080p 1,000hz, 4k 500hz, and 8k 250hz. I feel like this type of monitor could even have some fancy Nvidia/AMD tech that allows the monitor to seamlessly transition between high resolution, high brightness and and high refresh workflows. It shouldn’t be too difficult for the GPU to recognize if it is serving an 8k video or a 1080p 500+fps videogame.
The ULMB works fine you just have to setup it like they said on the website Step 1. In the NVIDIA Control Panel -> Manage 3D Settings, under "Global Settings" -> "Restore" settings. Next, disconnect the power cable from the monitor, reconnect the power cable, and power on the monitor. Step 2. In the NVIDIA Control Panel -> Manage 3D Settings, under "Global Settings" -> Monitor Technology: Set a "fixed refresh" . Step 3. Change the resolution settings to a "refresh rate" of 500Hz or higher, and ULMB2 can be configured successfully. Step 4. Launch the gaming software or any related software that supports ULMB.
it actually worked, thanks! been having this problem since I got the monitor for 3years ago.. asus XG27AQM. I thought I could use gsync and ulmb sync simultaneously
most arena fps are easy to run at 500+ fps, too. Exept for quake champions pretty much any game in that genre you can get enough fps even on older hardware. In warfork for example i easily reach the 1000 fps cap on my 7 year old PC and in Diabotical I just have to turn down the render scale a bit and than i get 500 fps, too.
dont force ulmb in the nvidia driver (leave it at gsync) then it wont switch off anymore when u tab to desktop. the driver setting doesnt work properly with the monitor atm.
yeah, I mean you have to upgrade the setup at some point. This monitor doesn't have even dyac or black equalizer. Maybe it is a waste cuz had my skill peak 2020 when i played more. Still top 1% tho on cs2 premier but i dont consider myself as a good player on my scale. Maybe the upgrade is waste maybe not.
@@Ico938 They're going to give them to most pros for free so … kind of true but for most (baller) casuals the OLED is a much better option virtually almost the same experience as the 500hz with better viewing experience for single player games and media consumption
Great review. I bought the same monitor few days ago but after only 2 days of use I noticed it developed some weird dark spots in the middle of the screen. These are visible when I'm displaying a black background and slightly on gray, not visible on other colors. Could you please check yours and let me know if you are having the same issue?
Ulmb2 turning off when alt tabbing is fixable u jiat need to play around with sum windows display settings/gpu display settings, and i solves that issue, dont ask me how tho i can't remember, it was annoying bit fixed now
Can’t believe a 1080p TN doesn’t have a sharpness setting on a 1000 dollar monitor. Playing 1280x960 4:3 on cs2 is too blurry without a sharpness feature.
I have the opportunity to buy this monitor at 850 Euro brand new, but I already own the XG27AQMR thats 300hz IPS 1440p. I don't play CS/OW/VAL/R6S. The only game I play where I can achieve those frames is BF4 (Operation Locker map only), I run a 12700k with an RTX 4080. Also started playing The Finals quite a lot, but that game still needs more optimization. I could also buy the monitor and return it in 14 days just to try it out. I also owned the XL2566k and PG27AQN.
Which of those Monitors you find you had the best experience with? I also have the AQMR right now, which i enjoy a lot ower the PG27aqn, because of the Sharpening Setting which wasnt available at the PG - quiet annoying tbh.
@@joshuasims1299 where it wins ? it have only 54 percent of refresh rate of response time at max hx it means it works only good at 300 hz motion.. and u need ULMB oled no need for ULMB it have better motion clarity.. 240hz oled is 500hz tn with no ulmb.. 480 oled is like 960hz tn or 700hz tn with ULMB.
I don’t have the alt tab issue you have. Perhaps you have some strange settings. Have this and xl2566k. Stand on this one is way better and less wide which allows you to have the mousepad and keyboard closer to each other without pulling the monitor further away. 3k elo faceit
It's a general issue, not regards to settings. Many folks have the same problem. No shot you actually have the 2566k if you think this stand is better 😄
Why do you think the zowie stand is better? Most of the base is in front of the monitor itself while on the Asus it is behind. It just leaves more room in the front.@@hausgaming
xl2566k owner here, if you dont mind, can you explain, have you felt difference, which is better, basically short comparison between monitor in video and xl2566k? thx
Does the PG248QP also support higher resolution at less Hz? For example, can I play CS2 at FHD (1920x1080) 540hz and then close the game, change the resolution to HQD (2560 x 1440) and use less Hz? 360hz for example (not overclocked) or less such as 240hz or even 60hz?
Can u make a video on your new main mouse. Im still on the m42. However i want to try lamzu Atlantis mini, pulsar x2v2 mini, pulsar x2h mini, and endgame op1ew. Which mouse is closest to m42? Do you still main m42?
What setting do you put it at for best picture? Do you have some general ones I can change to make it look better? Like racing then brightness contrast like what do you have them set at for best picture. I’ve been having a hard time trying to find a sweet spot
Drawing explaining motion blur = science
ULMB2 turning off when you alt tab would annoy me like crazy 😅
Same with aqn
Triggered me incredibly hard at the start. With XL2566K it's just a single button click from the S-witch to get DyAc+ and a more bright game profile. Where as with ASUS monitors, two button presses to get ULMB2 on and 3 more to get the correct profile 💀
@@hausgaming I'm not the market for these ultra monitors...but honestly if I was looking at spending $ like that for 500hz I'd probably just grab Zowies new one that's coming.
Set Monitor Technology to Fixed Refresh in NVCP and ulmb2 won't turn off when you alt tab@@hausgaming
what hz is currently used by pro players in cs2? and how much do you have to spend to gwt a similar setup?
480Hz OLED monitors to be shown soon at CES that will be fun to see too.
Is this the dual refresh and res monitor?
4k 240hz / 1080p 480hz
@@ching8733I just watched a video about Oled tech and it is really promising. I wonder if what you are referencing is the oled tech where they will stack 2 oled panels on top of eachother allowing them to increase the lifespan of the pixels by 4x and decrease burn in by dropping the power per pixel. With a double layer panel, I assume the pixels could be organized in a manner where you can have all of them on at the same time for 4k res, or have them handle every other frame for 1080p 480hz. If this works well maybe they will even be able to do 4 panel layers and quickly jump to a monitor that offers 1080p 1,000hz, 4k 500hz, and 8k 250hz.
I feel like this type of monitor could even have some fancy Nvidia/AMD tech that allows the monitor to seamlessly transition between high resolution, high brightness and and high refresh workflows. It shouldn’t be too difficult for the GPU to recognize if it is serving an 8k video or a 1080p 500+fps videogame.
2025 model 1440p 480hz monitor
The ULMB works fine you just have to setup it like they said on the website Step 1. In the NVIDIA Control Panel -> Manage 3D Settings, under "Global Settings" -> "Restore" settings. Next, disconnect the power cable from the monitor, reconnect the power cable, and power on the monitor. Step 2. In the NVIDIA Control Panel -> Manage 3D Settings, under "Global Settings" -> Monitor Technology: Set a "fixed refresh" . Step 3. Change the resolution settings to a "refresh rate" of 500Hz or higher, and ULMB2 can be configured successfully.
Step 4. Launch the gaming software or any related software that supports ULMB.
It stays on all the time
it actually worked, thanks! been having this problem since I got the monitor for 3years ago.. asus XG27AQM. I thought I could use gsync and ulmb sync simultaneously
It sadly did not work for me, preferably I would have it OFF in desktop and ON only for games
ULMB sync still auto turns off, but at least I can use it now..
most arena fps are easy to run at 500+ fps, too. Exept for quake champions pretty much any game in that genre you can get enough fps even on older hardware. In warfork for example i easily reach the 1000 fps cap on my 7 year old PC and in Diabotical I just have to turn down the render scale a bit and than i get 500 fps, too.
WTF? Try getting 600 fps at cs2 lol
dont force ulmb in the nvidia driver (leave it at gsync) then it wont switch off anymore when u tab to desktop. the driver setting doesnt work properly with the monitor atm.
I've tried everything :D. Nothing makes it stable for me and always turns of when I alt tab
hey @hausgaming. First time on your channel. Enjoyed the video :) Any plans on testing the xl2586x when it becomes available?? Thanks in advance :)
Do u have cursor stutering problems with 1000poling rate mouse? And can u get 540fps in Apex?
no and no 300fps cap on apex
Still rocking Asus XG258Q 240hz + 9900k 5.2ghz... time to upgrade soon but I don't know does it make me any better to rock 540hz + 7800x3d
yeah but this setup is from 2018 not the greatest anymore
@@T41T31L1JA if you're underperforming with your current setup then its a skill issue, 540hz won't suddenly make you play better
yeah, I mean you have to upgrade the setup at some point. This monitor doesn't have even dyac or black equalizer. Maybe it is a waste cuz had my skill peak 2020 when i played more. Still top 1% tho on cs2 premier but i dont consider myself as a good player on my scale. Maybe the upgrade is waste maybe not.
@@T41T31L1JAI'd get the XL2566K, the 360hz is the one most pros use also.
Какой у вас прицел в cs2 ?
What best buy ASUS rog or zowie for hz 540
What monitor feels the best for cs2? the Asus 27" ?
Haus do you plan on testing the upcoming ZOWIE XL2586X Fast TN 540Hz DyAc™ 2 ?😎
Yes!
Bro this monitor is gonna cost like over 1grand
Upcoming OLED 1440p 360hz are the way to go for competitive gaming and single player games.
Single player, sure. competitive? everyone will be on zowie 540hz next year.
@@Ico938 not rly, u need stable 500fps to have benefits form it, not many cs players have high end pc
@@Bonekk1992 People who can afford monitors for over 900 dollars can afford a 7800x3d.
@@Ico938 yes but u said "everyone". maybe 5% of playerbase can afford
@@Ico938 They're going to give them to most pros for free so … kind of true but for most (baller) casuals the OLED is a much better option virtually almost the same experience as the 500hz with better viewing experience for single player games and media consumption
haus ,what mouse you use in the video in cs2 ? :D haha tytyty nice video!
monitor arm is not an exciting thing to buy but damn its so much nicer then standard feet
Great review. I bought the same monitor few days ago but after only 2 days of use I noticed it developed some weird dark spots in the middle of the screen. These are visible when I'm displaying a black background and slightly on gray, not visible on other colors. Could you please check yours and let me know if you are having the same issue?
Mine has that too
Pls Haus, what is name of that white mouse from 0:24, i have been thinking about that hump whole week
Xlite V3!
Are you planning on doing a In depth review on the beast x mouse
we need smaller 1440p monitors .. 25 inch ..
Ulmb2 turning off when alt tabbing is fixable u jiat need to play around with sum windows display settings/gpu display settings, and i solves that issue, dont ask me how tho i can't remember, it was annoying bit fixed now
I have the same ulmb sync promblem with my asus XG27AQM.. is there any fix to this??
Waiting for the U2 review :'3
can you share your CS2 cfg?
Waw.. it's 540hz
In this day im still use my 240hz monitor
need update on this video
I was wondering whats your opinion on this when i saw it on your table a few weeks ago.
Can’t believe a 1080p TN doesn’t have a sharpness setting on a 1000 dollar monitor. Playing 1280x960 4:3 on cs2 is too blurry without a sharpness feature.
I have the opportunity to buy this monitor at 850 Euro brand new, but I already own the XG27AQMR thats 300hz IPS 1440p. I don't play CS/OW/VAL/R6S. The only game I play where I can achieve those frames is BF4 (Operation Locker map only), I run a 12700k with an RTX 4080. Also started playing The Finals quite a lot, but that game still needs more optimization. I could also buy the monitor and return it in 14 days just to try it out. I also owned the XL2566k and PG27AQN.
Which of those Monitors you find you had the best experience with? I also have the AQMR right now, which i enjoy a lot ower the PG27aqn, because of the Sharpening Setting which wasnt available at the PG - quiet annoying tbh.
quickly how monitors appear with higher and higher hz
Whats your cpu and ram?
5900X and 32gb DDR4
@@hausgaming Did you choose the 5900X over the 5800X3D for productivity reasons?
well, that is "lame" for cs2 :D you need 14900k or 7800x3d basically, especially for 540hz + high speed ddr5@@hausgaming
asus OSD settings could use a rework in my opinion. im on pg27aqn and much prefer my old LG monitors OSD.
Benq Zowie 540hz waiting room.....
idd
OLED at 480Hz would probably beat this even without ULMB
oled is faster at 480hz with no ulmb2 and hdr on and adaptive sync input lag only 1.2msec. Average 0.2 msec response time.
540hz wins
@@joshuasims1299 where it wins ? it have only 54 percent of refresh rate of response time at max hx it means it works only good at 300 hz motion.. and u need ULMB oled no need for ULMB it have better motion clarity.. 240hz oled is 500hz tn with no ulmb.. 480 oled is like 960hz tn or 700hz tn with ULMB.
I don’t have the alt tab issue you have. Perhaps you have some strange settings. Have this and xl2566k. Stand on this one is way better and less wide which allows you to have the mousepad and keyboard closer to each other without pulling the monitor further away. 3k elo faceit
It's a general issue, not regards to settings. Many folks have the same problem. No shot you actually have the 2566k if you think this stand is better 😄
Why do you think the zowie stand is better? Most of the base is in front of the monitor itself while on the Asus it is behind. It just leaves more room in the front.@@hausgaming
xl2566k owner here, if you dont mind, can you explain, have you felt difference, which is better, basically short comparison between monitor in video and xl2566k? thx
whae pc specs do u have and settings for cs2
5900x, 3080 and 32gb DDR4
Funny thing Is I love the stand and I think it's way better then the zowie xl2566k 360hz wich I own if feel like it gives you way more space
no sharpness setting and poor coating, I returned mine and am waiting for the next zowie
Hyvää sisältöä!
good luck getting more than 540 fps in game :))
It's just stupid since you can barely hit stable 540fps
And how is that stupid? It's still refreshing at a much higher framerate, which will show basically no tearing
Does the PG248QP also support higher resolution at less Hz?
For example, can I play CS2 at FHD (1920x1080) 540hz and then close the game, change the resolution to HQD (2560 x 1440) and use less Hz? 360hz for example (not overclocked) or less such as 240hz or even 60hz?
No???? How would this be possible on a 1080p Panel??
Can u make a video on your new main mouse. Im still on the m42. However i want to try lamzu Atlantis mini, pulsar x2v2 mini, pulsar x2h mini, and endgame op1ew. Which mouse is closest to m42? Do you still main m42?
the fact ur using ulmb etc in cs is shocking
you gonna make me buy a zowie monitor again lol
What setting do you put it at for best picture? Do you have some general ones I can change to make it look better? Like racing then brightness contrast like what do you have them set at for best picture. I’ve been having a hard time trying to find a sweet spot
hyvää joulua
It's useless when you can't maintain 540fps in CS2
Whenever I do dip below 540fps it is not noticeable at all imo fyi
It’s not useless lmao what is this cope broke attitude
Ugliest monitor I‘ve ever seen.
540hz without stable 540fps is useless, u can have 500fps only on top setups
Definitely not useless without a stable 540fps as long as your FPS is high enough. You do get most benefits with stable 540 for sure though!
Those 1 percent lows tho