I am not a fan of having the filament run out sensor so far away from the extruder only because I've had it on more than one occasion where the filament snapped after the run out sensor. Adding a bowden tube between the extruder and the run out sensor seemed to help prevent the filament from snapping right after the sensor.
Man, you should've released this a few days sooner! I just bought my A1. I think I'll like it, though. I probably would have bought it over the SOVOL anyways.
@@mettscientist Thank you for all the info. I’m definitely glad I bought the a1, but ams is not affordable right now and I’ll have to get it in the future. (I'm 15 and I've been doing tech stuff my whole life, but I don't have a job yet). Also, I’ll definitely be using a slicer because I’ve been making my own 3d models for little keychains and trinkets. The mobile app will be really convenient though!
I'm a modeler. Multi color printing is not necessary. I want beautiful prints and I will paint them. I need a printer that can produce accurate dimensions, with minimal layer lines. This printer is what I'm looking for. The only problem I'm having is giving my Ender 3 S1 to someone. I have an FLSUN Speed Racer delta that's tuned to perfection. I like the speed increase, Clipper, and WiFi. Great review.
Many thanks for the video. I really like these quick & short ones, with dense information. Don't need to watch a 500th unboxing video, with 30 or more min. playtime! 😏 For sure Sovol built a solid printer here and I really like what they're doing ... but from my point of view it's too late to compete with the A1. With the current and very aggressive price of the A1, the AMS option for only 150$/€ and Bambus Ecosystem, it will be very difficult to convince customers to chose it over the A1. I think it could be a good machine for tinkering and people who like to play around. But for me, after 6 years of printing, starting with the Ender 3, I'm done with this an appreciate the simplicity and good results of my A1 Mini and A1. (just got the A1 Combo this week)
Thank you so very much! That A1 is such a beautiful machine and the ecosystem is the best we’ve seen for sure! Congrats on the new machine this week! Both of your machines are the best the industry offers!
@@LoyalMoses many thanks for your reply. I had quite a journey, started 6 years ago with the Ender 3, six other printers along the way. But Bambu is, like you often said in your videos, just mind blowing. I'm an electrical engineer and can't believe what they do at this price point. Hope others will keep up one day but right now Bambu really is way ahead.
Im am an absolut beginner and want to switch On an Off the light by an macro via Mainsail. Does someone know, which Pin is connented so that I hopefully can add the correct macro? Many thanks in advance! Willi
Always great no BS review. Why don’t Sovol make a dual idex, twin gantry idex. No change purges, complicated tool head swapping. An DIDEX 😂 would be king of multi color, just a thought
Always professional, always down-to-earth. Thank you for the honest review! I'm also curious to see how a CoPrint addition would compare with the A1+ AMS or the Kobra 3 combo
Just finished printing some prototype test fit parts on my sv06 that I have had since they released it, stock with marlin but running 4k accelerations and some tweaks to tuning in firmware. Printing at 150mm/s infill and 80mm/s perimeters and the thing still prints like a dream, I am sure I could go harder with a CHT nozzle and still have perfectly usable parts with a little ringing. I have to get around to putting klipper on it at some point, but getting parts 4x faster than the stock profile with no hardware mods past a 5015 part fan and duct I am extremely happy with it. If this thing has the build quality of the SV06 and then some, with the added benefits of klipper, I am getting one.
First thank you for another great video. And since we are already making comparisons to the A1 do you know if the camera on the Sovol is also a low framerate one and also is it capable of detecting fillament tangles?
Thank you! Because it’s Klipper it can easily be done. I was just informed by SOVOL that the camera is disabled by default under the settings for privacy reasons! 🔥
On a side note about the price. In the EU the Sovol is an even better deal because the price doesn't get converted to euros unlike on the bambu lab's site. It stays $259.00 instead of 259 euros (which would actually be around $279). And the shipping cost from Sovol was cheaper for me too.
The focus on user experience is going to be a big benefit for them. Part of the reason BL has been eating everyones lunch is they have UX in using the machine absolutely nailed. As long as companies are purely focused on speeds and tech without making a printer much easier to use, they're still going to spend time wondering why their sales aren't what they could be.
Glad to see some new highspeed bed slingers to compete with the A1. Definitely need multi-color these days though. I would love to see your take on the Anycubic Kobra 3 Combo with the ACE. It is everything the SV06 is with multi=color and a built in dryer.
Great video as always. Really looking forward to the comparison with the A1. I feel like the A1 is the current bedslinger to beat, especially with the Black Friday sale currently going on.
I got the regular sv06 a couple weeks ago. Im a noob and i like this printer alot. Its down right now for a couple days because i already have a bad bearing that i need to replace
Sovol Bearings aren't pack with grease so they are noisy as hell when there new,,, so it will pay to pack the X/Y/Z Bearing with grease when you get around to doing a Breakdown -- my bearing were nosiey for about a month after i packed them with Grease now they quite asf (SV06+) -- and remember they are cheap bearing $1 to start with - so doing an upgrade in about 1yr would be worth while -/. All the Best-/.
Multi color would be nice but i dont have much hope for co print since the sv08 co print page no longer exists. Half the reason o got the sv08 was due to the co print add on. I think i will just get a A1 and ams instead, with black friday sales on, its hard to say no to it. This is a nice printer though, 13 miniute benchy on a bed slinger is insane, especially that quality
great vid and great machine. and yeah that price is insane when cost of material is still up there and some things are still slowly available. Heard about coprint. i think they where talking with creality at one point before creality did there own multi color.
That bed plate design looks awfully familiar to creality but that thing looks great and klipper and related greatness baked in for what I paid for my v3 se
I just released another video on the A1 and A1 mini from Bambu Lab, those are really, near perfect machines. I also LOVE the T1 Pro from FLSUN, likely going to be my favorite machine of 2024 -- it's SOOO fast! There are so many other good ones too!
Personally I don't care about multicolour unless there is close to zero waste, although multi material is another story. Zero support gap and perfect overhangs are nice.
Printing a boat means absolutely nothing to me, as I've never printed one and never well. I want to see how good it prints a figure, how easy the supports come off, and what it looks like when you do remove the supports. High speed means nothing if the quality sucks.
Multi color is a gimmick... there, I said it. Learn how to paint and take pride in your work, rather than cranking out cheap toys. I really like this machine, allot! Thanks for the great review. Excellent editing and filming.
@@LoyalMoses I like the multi color option as aa great way to have four colors ready to go. Changing filament rolls is a pain, so if I can load up an assortment of filaments and always have them on hand is a great plus for multi color. And, who knows, maybe I'll warm up to it! I have had no problems with filament moisture, so I can see no downsides to having four rolls exposed to my room humidity. Hmmm... I'm starting to reconsider this.
The price is great, but the A1 looks more refined, cables are more organized and overall structure just looks cleaner. I already have 2 A1's and I would buy another A1 before I buy this one. $40 more for the A1 isn't that much.
Trouble is Bambu disappears, and your printer gets a lot less useful and maintainable. And that should be an unforgivable red flag for everyone, though I understand it isn't.
@@Frentraken That's understandable, but to be fair, even if bambu disappears tomorrow, the printers will still function in LAN mode just fine; many print farm owners with bambu printers use LAN mode exclusively. That said, I really wouldn't worry about bambu disappearing anytime soon. They're probably some of the most popular printers on the market, and for good reason. They're also not the only "closed source" printer manufacturer on the market, especially considering how loosely the definition of "open source" is actually interpreted by a lot of other manufacturers. Open source is great, but closed source isn't the doomsday scenario a lot seem to take it as.
This isn't even a competition with the A1 being only $40 more for a much, much better printer. I have three A1s (and a mini) and would absolutely buy another A1 over any other bedslinger available.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
UPDATE: The camera is simply disabled by default under settings for privacy reasons! 🔥
Absolutely love a company doing privacy by default, it's a great change from a lot of what we've seen in recent years.
That is actually really admirable.
Glad to see they finally listened to their users and upgraded parts cooling.
Cooling is much nicer!
I wish that they made upgrade kits for the original SV06… even if it was nearly the same price.
That is one thing that I really like about Prusa, the upgrade paths.
Definitely want to see the co print in action
Awesome! I’ll do it then.
@@LoyalMosesyes please
I am not a fan of having the filament run out sensor so far away from the extruder only because I've had it on more than one occasion where the filament snapped after the run out sensor. Adding a bowden tube between the extruder and the run out sensor seemed to help prevent the filament from snapping right after the sensor.
I bought the regular sv06 a day before this was revealed but i don't regret it. i am very satisfied.
I wouldn’t worry either! Congrats on a new machine too!
Same here haha, did you go with the klipper upgrade or just using Marlin?
@Pharaoh-Lash just made the update for the new firmware (2.2 )and that's all. For now at least
Same
@@kamilczerwonka9652 awesome thank you for the feedback!
always good to see a new video
Man, you should've released this a few days sooner! I just bought my A1. I think I'll like it, though. I probably would have bought it over the SOVOL anyways.
Your better off with the A1
Oh, no regret! That A1 is an incredible machine. I’ll do a comparison video.
Bambu has a better record than Sovol you'll be very happy with your A1 just like me lol @@amthystxx
Yeah thats the peoblem if you order from their site. I got primter in 3 days, but filament came after one and a half week. @amthystxx
@@mettscientist Thank you for all the info. I’m definitely glad I bought the a1, but ams is not affordable right now and I’ll have to get it in the future. (I'm 15 and I've been doing tech stuff my whole life, but I don't have a job yet). Also, I’ll definitely be using a slicer because I’ve been making my own 3d models for little keychains and trinkets. The mobile app will be really convenient though!
How is the bed leveling working? What kind of sensing does it use?
Co print for sure. I'd love to see it in action on a budget friendly printer
Wouldn’t that be cool?!?
Where can I find print profiles for this printer?
On the USB drive that comes with the printer!
How did you fix the exception in fan? Mine decided to do it today.
I haven't had any trouble! Tell me more what happened!
Mine has started doing that as well. Don’t know what to do.
Sad
@andewpippin5058 Well, now mine is working pretty well. The firmware update might have had something to do with it
Any updates on adding the coprint to it?
I too would like to see multi-color added to it. Looking forward to your video.
I'm gonna do it for sure!
I'm a modeler. Multi color printing is not necessary. I want beautiful prints and I will paint them. I need a printer that can produce accurate dimensions, with minimal layer lines. This printer is what I'm looking for. The only problem I'm having is giving my Ender 3 S1 to someone. I have an FLSUN Speed Racer delta that's tuned to perfection. I like the speed increase, Clipper, and WiFi. Great review.
Thank you! There are so many awesome machines out there and it’s cool to hear you have a tuned delta! 🔥
i had a bambu p1s and sold it 2 month ago... waiting for the new release now... im really thinking of getting one of these in the meantime lol
Cool!
Many thanks for the video. I really like these quick & short ones, with dense information. Don't need to watch a 500th unboxing video, with 30 or more min. playtime! 😏
For sure Sovol built a solid printer here and I really like what they're doing ... but from my point of view it's too late to compete with the A1. With the current and very aggressive price of the A1, the AMS option for only 150$/€ and Bambus Ecosystem, it will be very difficult to convince customers to chose it over the A1.
I think it could be a good machine for tinkering and people who like to play around. But for me, after 6 years of printing, starting with the Ender 3, I'm done with this an appreciate the simplicity and good results of my A1 Mini and A1. (just got the A1 Combo this week)
Thank you so very much! That A1 is such a beautiful machine and the ecosystem is the best we’ve seen for sure!
Congrats on the new machine this week! Both of your machines are the best the industry offers!
@@LoyalMoses many thanks for your reply. I had quite a journey, started 6 years ago with the Ender 3, six other printers along the way. But Bambu is, like you often said in your videos, just mind blowing. I'm an electrical engineer and can't believe what they do at this price point. Hope others will keep up one day but right now Bambu really is way ahead.
Im am an absolut beginner and want to switch On an Off the light by an macro via Mainsail. Does someone know, which Pin is connented so that I hopefully can add the correct macro?
Many thanks in advance!
Willi
Wondering if you have any updates on the qudi plus 4?
Always great no BS review. Why don’t Sovol make a dual idex, twin gantry idex. No change purges, complicated tool head swapping. An DIDEX 😂 would be king of multi color, just a thought
Thank you! 🔥 From my understanding IDEX are very difficult to source quality parts for.
Always professional, always down-to-earth. Thank you for the honest review! I'm also curious to see how a CoPrint addition would compare with the A1+ AMS or the Kobra 3 combo
Thank you!!! 🔥 I have both of those here, and there are comparisons coming for them!
I've never got the first sv06 running well, it still loses the offset and levelling after turning off even after updating it.
Oh, that isn't good!
Just finished printing some prototype test fit parts on my sv06 that I have had since they released it, stock with marlin but running 4k accelerations and some tweaks to tuning in firmware. Printing at 150mm/s infill and 80mm/s perimeters and the thing still prints like a dream, I am sure I could go harder with a CHT nozzle and still have perfectly usable parts with a little ringing. I have to get around to putting klipper on it at some point, but getting parts 4x faster than the stock profile with no hardware mods past a 5015 part fan and duct I am extremely happy with it.
If this thing has the build quality of the SV06 and then some, with the added benefits of klipper, I am getting one.
this is a 4 wire toolhead printer ?
Try it ! Love to see more multi color options on the market
I’m gonna do it! You all have convinced me to!
Would love to see the CoPrint install. I ordered mine the other day.
Oh awesome!!!
Just ordered it, will be a big upgrade from my lotmaxx shark v2, would like to see the co print on it. For further upgrades. Thank you for the vid.
Oh wow! Congratulations!!!
@LoyalMoses thank you, been going around looking for a few weeks on getting a new one,and this hit the price range right on the mark
Ty! Great video and considering one for my farm
Thanks!
Great video. Lots of good information. Solid printer. Look forward to see more of this one.
I think a great comparison would be with the Bambu A1, MK4 and maybe the Ender 3 V3
First thank you for another great video.
And since we are already making comparisons to the A1 do you know if the camera on the Sovol is also a low framerate one and also is it capable of detecting fillament tangles?
Thank you! Because it’s Klipper it can easily be done.
I was just informed by SOVOL that the camera is disabled by default under the settings for privacy reasons! 🔥
@@LoyalMoses Damn. Thanks for the fast response. And the affiliate link ;)
On a side note about the price. In the EU the Sovol is an even better deal because the price doesn't get converted to euros unlike on the bambu lab's site. It stays $259.00
instead of 259 euros (which would actually be around $279). And the shipping cost from Sovol was cheaper for me too.
FYI; SOVOL just told me the camera is simply disabled by default for privacy!
I would love to see the coprint in action. I think this is going to be my first printer
Heck yes!
Get that CoPrint system added yesterday! I want to see this printer run multi-color prints
This will be fun!
The focus on user experience is going to be a big benefit for them. Part of the reason BL has been eating everyones lunch is they have UX in using the machine absolutely nailed. As long as companies are purely focused on speeds and tech without making a printer much easier to use, they're still going to spend time wondering why their sales aren't what they could be.
Just my opinion, but I believe that for any consumer-level printer to be competitive today it will need some form of AMS.
I feel about the same way too. We need more multi color options!
Glad to see some new highspeed bed slingers to compete with the A1. Definitely need multi-color these days though. I would love to see your take on the Anycubic Kobra 3 Combo with the ACE. It is everything the SV06 is with multi=color and a built in dryer.
I'm also waiting for your thoughts on Kobra 3 Combo, I have one and love it, but I'd like to see what you have to say about it.
Great video lm looks like a solid machine 🤙🏻
It’s a fun one for sure! Simple, loaded.
Great video as always. Really looking forward to the comparison with the A1. I feel like the A1 is the current bedslinger to beat, especially with the Black Friday sale currently going on.
Thank you and I agree!
Yes please add the copying
Sorry coprint
I knew what you meant! We’ll do it!
What about putting that Coprint on the Ender 3 franken-printer?
We could for sure!
I got the regular sv06 a couple weeks ago. Im a noob and i like this printer alot. Its down right now for a couple days because i already have a bad bearing that i need to replace
Wo! A bad bearing on it already? Are they sending the parts?
Sovol Bearings aren't pack with grease so they are noisy as hell when there new,,, so it will pay to pack the X/Y/Z Bearing with grease when you get around to doing a Breakdown -- my bearing were nosiey for about a month after i packed them with Grease now they quite asf (SV06+) -- and remember they are cheap bearing $1 to start with - so doing an upgrade in about 1yr would be worth while -/.
All the Best-/.
@Mindless_One I packed em good 👍
Another great video!
Thank you!
@@LoyalMoses I wonder if an update to the SV07 is around the corner!
Multi color would be nice but i dont have much hope for co print since the sv08 co print page no longer exists. Half the reason o got the sv08 was due to the co print add on.
I think i will just get a A1 and ams instead, with black friday sales on, its hard to say no to it.
This is a nice printer though, 13 miniute benchy on a bed slinger is insane, especially that quality
A1 is an AMAZING machine! I am hoping the Co Print is a cool device!
Just moved my ercf from my old bedslinger to my sv08. Works great 🙂👍
I’d like to see the coprint installed. Im waiting for it for my sv08 and now this sv06 ace.
I’ll do it then!
Looks like a great printer for the price
Fun machine, loaded, simple, good price.
Looks like a pretty good printer!
It is a pretty cool little machine.
@ it takes after its new owner! ;)
Hahaha
I wanna see it printing in multi color, Lezduit.
Heck yeah!!!
Yes add the co print!
I will for sure! We'll see what it can do!
Please, a comparison with the A1 would be so great ❤
I can do that!
@LoyalMoses looking forward, thanks 🎉
Yes, try the coprint with that printer and also a older ender 3v2.
Yes, that would be awesome too!
I have been considering the SV08 for a little while now.
That’s a cool machine. A lot can be done with it!
Go on, multicolour is a must have now!
I know! I want to see more of it!
great vid and great machine. and yeah that price is insane when cost of material is still up there and some things are still slowly available. Heard about coprint. i think they where talking with creality at one point before creality did there own multi color.
Thank you! And yes, insane how low the prices are going. I am super stoked about Co Print too!
Interested to see the co print. Let's see more multi color capable options 🎉
I’m gonna do it!!
I'd love to see the coprint in action.
I’m gonna do it now for sure!
It’s looks great, but I’ll wait for a plus size!
That will be cool!
yes to multi color
Yes!!!
I’d definitely watch the coprint video
Awesome! Then I’ll do it for sure!
That bed plate design looks awfully familiar to creality but that thing looks great and klipper and related greatness baked in for what I paid for my v3 se
Oh yes go colour, yes I spelt colour correctly 😮😉
Haha! Yes, let’s do the color thing!
nice trackball mouse.
Thanks!
How do I contact you?
loyalmoses.com
It is approachable at $259, but I went with an MK4S Kit.
Prusa makes solid machines!
I would definitely like to see multicolour on that thing
Absolutely!
which Printer would you recommend for Christmas as a second printer around 500€
I just released another video on the A1 and A1 mini from Bambu Lab, those are really, near perfect machines. I also LOVE the T1 Pro from FLSUN, likely going to be my favorite machine of 2024 -- it's SOOO fast!
There are so many other good ones too!
Personally I don't care about multicolour unless there is close to zero waste, although multi material is another story. Zero support gap and perfect overhangs are nice.
I’m here for it all! Thanks for sharing!
Would like to see the co print in action
Definitely we are gonna do it!
I want you to see you add CoPrint to various machines and see the experience...namely something from Creality and the Elegoo Neptune series.
We can definitely do that!
sovol doesnt miss
They’ve been doing awesome!
Printing a boat means absolutely nothing to me, as I've never printed one and never well. I want to see how good it prints a figure, how easy the supports come off, and what it looks like when you do remove the supports. High speed means nothing if the quality sucks.
Weird hill to die on.
Might add an SV06 Ace to the fleet. My two A1’s could do multicolour while this churns out other prints.
Decisions decisions…
Those A1s are so NICE!
@@LoyalMoses haven’t had any issues since I got it this summer. 700 hours later it’s still punching above its weight class!
You should make a multi color video
Yes!
defintly muilti color print vid converted
Heck yeah!
Sv06 vs kobra 3
Heck yeah we could do that!
Bamboo or nothing !
Bambu!
Hey, Loyal. Still have that video of what I should buy for $300 or less? It’s not like you are busy or anything. 😜 -T4L-CZR
Nice machine, but yeah, co print
Definitely!
Multi color is a gimmick... there, I said it. Learn how to paint and take pride in your work, rather than cranking out cheap toys. I really like this machine, allot! Thanks for the great review. Excellent editing and filming.
I think most people see it the other way, they get to use all of these amazing colors and types of filament.
Thank you for the kind words!
@@LoyalMoses I like the multi color option as aa great way to have four colors ready to go. Changing filament rolls is a pain, so if I can load up an assortment of filaments and always have them on hand is a great plus for multi color. And, who knows, maybe I'll warm up to it! I have had no problems with filament moisture, so I can see no downsides to having four rolls exposed to my room humidity. Hmmm... I'm starting to reconsider this.
The price is great, but the A1 looks more refined, cables are more organized and overall structure just looks cleaner. I already have 2 A1's and I would buy another A1 before I buy this one. $40 more for the A1 isn't that much.
That A1 is so hard to compete with! It’s a neat perfect machine!
This one is open-source-a big plus for some, though it might not matter to others
Trouble is Bambu disappears, and your printer gets a lot less useful and maintainable. And that should be an unforgivable red flag for everyone, though I understand it isn't.
@@Frentraken That's understandable, but to be fair, even if bambu disappears tomorrow, the printers will still function in LAN mode just fine; many print farm owners with bambu printers use LAN mode exclusively. That said, I really wouldn't worry about bambu disappearing anytime soon. They're probably some of the most popular printers on the market, and for good reason. They're also not the only "closed source" printer manufacturer on the market, especially considering how loosely the definition of "open source" is actually interpreted by a lot of other manufacturers. Open source is great, but closed source isn't the doomsday scenario a lot seem to take it as.
This isn't even a competition with the A1 being only $40 more for a much, much better printer. I have three A1s (and a mini) and would absolutely buy another A1 over any other bedslinger available.