Hello Mr. Ke Zhao, thank you for your interest! Buildings realized with the Emmedue System don't require traditional bearing elements, as certified by: - ETA certification, for the European Union; - different tests carried out in laboratories all over the world (including seismic tests); - and hundreds of thousands of buildings realized with the Emmedue System without traditional bearing elements, such as beams and columns. For any other inquiry, we are at your disposal at info@mdue.it
@@EMMEDUEabs what thickness foam /density and wire diameter / mesh is needed for a single or 2 story house to be built with out columns and beams and withstand typhoon force winds ? I have been told here in Philippines that columns are needed but I suspect their panels are only 2 inch of foam.
@@boracay12 good morning. I guess we got your request this morning on our website and I already forwarded it to the person in charge who will get back as soon as possible with all the technical information needed. If that was not you, please write us at info@mdue.it so that we can forward your request to the dedicated department. Have a nice day!
@@EMMEDUEabs hello ,yes that was me ,thank you for your response . I'm looking forward to the information. . there is conflicting opinions .and I think your company is qualified to provide to give the correct requirements . Thanks again ,and have a good day .
Is it possible to build cantilevered rooms out of this material without providing beams, particularly for a short cantilevered floor overhanged by 30 cm?
Usually there is no problem creating cantilevers of that kind, but obviously you need to do the appropriate checks with structural calculations. In any case, if you email us at info@mdue.it, we can send you example pictures!!!
No doubts about the structural advantages, but EPS with layers of concrete is a big humidity trap. Are you relying from buildings using AC 100% all of the time?
Good morning Dominic! EPS is water vapor-permeable, making it breathable, yet waterproof. The permeability to water vapor ensures that mold does not develop inside buildings and environments insulated with EPS. Additionally, please note that the thickness of the panels is variable and is determined only after a thorough thermo-hygrometric assessment, which allows us to assess the potential formation of interstitial condensation. For any further information, feel free to contact us at info@mdue.it. Have a nice day! :)
You can contact directly our partner in USA: Gulf Concrete TECHNOLOGY INC 4739 West Oreck Road, Long Beach, MS 39560 ----------------------------------------- www.gctm2.com/ sales@gctm2.com Toll free - 866-936-6416 Thank you!
Good morning Ms. Rodeza, yes, as for the resistance to earth-quakes, laboratory tests carried out on full-scale prototype houses have shown that the Emmedue structures withstand, without any damage, earthquakes of seismic accelerations superior than those required by current seismic safety regulations. While regarding the resistance to fire, Emmedue panels are made of self-extinguishing expanded polystyrene, which is also perfectly confined by layers of reinforced concrete that cover the sides of the panel and prevent combustion. Its fire resistance has been verified according to international standards through tests conducted in different laboratories. Moreover, Emmedue panels have proved a great resistance to blast and cyclones. Please, check this link: www.mdue.it/en/advantages.php or more enquiries, we are at your disposal!
@@EMMEDUEabs I see the Cyclone resistance is only 106.20 km/h which translates to 66 mph which is not even Hurricane strength. Is that honestly the highest tested speed?
Good morning Deza, of course our building system has been subjected to resistance tests of all kinds (load, fire, hurricanes, earthquakes, etc ...) by accredited bodies around the world. If you are interested in learning more, please write to info@mdue.it and we will send you the documentation of your interest. Thank you :)
@@kitinvestments Good Morning Kevin, for technical details I invite you to contact us by email to info@mdue.it n order to be able to send you the technical documentation of your interest, Thanks :)
Good morning James, you can contact us at info@mdue.it so that we can put you in touch with the Emmedue panels production plant in the USA. Have a great day!
Is the 2nd story just attached to the first story's panels using the metal clips or are additional rebars laid in the 2nd story to support the 2nd story walls?
Hello Adam, in case of a multi-storey buildings, the walls of two consecutive levels are connected to each other by reinforcing bars with a maximum diameter of 8 mm. For any further question, please contact us by email at info@mdue.it!Thank you!
Hello Ahmed! With the Emmedue system it is possible to produce panels of different lenghts and thicknesses. In the roof, in terms of resistance, it will depend on the stresses it has to bear, that is, loads (as wind, snow, etc.) and the spans (distance between supports). Surface area is a relative measure that depends on these factors. For any further question do not hesitate to contact us at info@mdue.it. Thank you!
Hello Emon! The finishing raw material is a mix of cement, sand, water and additives. The quantities depends on the type of materials you have on site. The max size of sand is 6 mm. For any further question, please write us to info@mdue.it. Thank you!
Good afternoon Moses, we are answering to all questions, actually. By the way, of course we can build multi storey buildings too. If you need more details, please contact us by email at info@mdue.it and we will be glad to send you photos of some multistorey buildings we realized all over the world. Thank you! :)
We have 4 production plants in Saudi Arabia. You can contact this one: ALIAN INDUSTRY CO. in Riyadh alianind.com/ar/ Do not hesitate to contact us for any further information.
Sure, it is. Can you write me your email address so I can send you some photos of exemples of stairs realized with our panels or not, but anyway installed in houses built with our system?
Hello Daniel,Experimental tests run on the panels have provided optimal results, showing the suitability of the panels even in the most severe conditions, in accordance with the current technical laws. For further information, please contact us at info@mdue.it. Thank you! :)
Hi Chinh! I'm not sure I understand your comment. In any case, one of the characteristics of our building system is the ease of assembly on site. For further information, do not hesitate to contact us at info@mdue.it. Thank you :)
Good morning Tiguidanke, sorry for the dalay of my answer. We don't have any plant in Guinea, actually. The plants nearest your country are in Capo Verde and Algeria. If you need more information, please contact us to info@mdue.it. Thsnk you! :)
Unfortunately not. The plants closest to Nepal are in Indonesia, Philippines and Malaysia. For further information, do not hesitate to contact us at info@mdue.it. Thank you!
Good morning Sunil! The Emmedue building system has passed the fire tests about which we can send you documentation and videos. If you send us an e-mail to info@mdue.it, it will be our pleasure to send you all the documentation relating to the comparison of our system with the traditional one and the maximum bearable weight. We wait for your news by email. :)
Good morning and thank you for your interest. A building realized with the Emmedue System costs around 30% less than one carried out with traditional building system. Of course, to be more precise we'd need to know the raw materiala' costs in each country and other details! Have a nice day!
Good morning Mr. Palmer, please send us an e-mail at info@mdue.it so that we can give you all the information about Emmedue Panels manufacturers in your area. Have a nice day!
We are a Chinese manufacturer and have our own factory. If you are interested, you can add my whatsapp, +008615336457919, I will send you detailed pictures and video introduction
@@judithbacit1518 We can usually safely say that you would not need any additional structures, just our panels. In our website you can see this type of loft made in Spain, where the columns that are seen are only architectural and not structural. Have a look here: www.mdue.it/it/gallery.php?s=88&a=&t=&p=
Dear Mr. Ndungu, actually we don't produce panels, but we sell the technology to produce the Emmedue panels instead. If you are interested in our technology, please contact us at info@mdue.it Have a nice day!
Buongiorno Signor Spinelli, le comunico che abbiamo inoltrato la sua richiesta al nostro agente di area in quanto ci è pervenuta in questi giorni per e-mail. Provvederemo a contattarla il prima possibile per rispondere alla sua richiesta. Le auguro una buona giornata!
Hello Gideon, first of all I need to know where you are writing from, in order to understand if there is a production plant in the country of your interest. From there, I can put you in contact with the customer in the area in question to which you can then make all your requests and ask for all the information you need.
@@epsseriesmachines6965 For any request or information you can contact us at info@mdue.it. But if you want to sell us machines, we are not interested, because we produce them. Thank you.
Who is the carrier organism ??? only with shotcrete is achieved. You just make coatings that do not create a carrier organism. Extremely dangerous construction to create cracks.
Good morning Mr Kalfagian, our panels have been subjected to numerous tests all over the world which have demonstrated their mechanical characteristics and their load bearing capacity. These tests are then linked to as many numerous certifications obtained. When you want, we are willing to talk to you about it in order to show you that the constructions made with our construction system are not dangerous. For more informations, please, contact us to info@mdue.it. Thank you!
u have to understand stress points and also how different materials combined are more stronger than a pure concrete block, also that metal mesh is jointed with other panels and it makes the whole walls very strong
@@flamingobrokernv3987 Dear Mr Fernandes, I have checked and your email has already been forwarded to our area sales manager who will contact you as soon as possible. Thank you! :)
Impressive! But you guys don't need columns and beams？
Hello Mr. Ke Zhao,
thank you for your interest! Buildings realized with the Emmedue System don't require traditional bearing elements, as certified by:
- ETA certification, for the European Union;
- different tests carried out in laboratories all over the world (including seismic tests);
- and hundreds of thousands of buildings realized with the Emmedue System without traditional bearing elements, such as beams and columns.
For any other inquiry, we are at your disposal at info@mdue.it
@@EMMEDUEabs what thickness foam /density and wire diameter / mesh is needed for a single or 2 story house to be built with out columns and beams and withstand typhoon force winds ? I have been told here in Philippines that columns are needed but I suspect their panels are only 2 inch of foam.
@@boracay12 good morning. I guess we got your request this morning on our website and I already forwarded it to the person in charge who will get back as soon as possible with all the technical information needed. If that was not you, please write us at info@mdue.it so that we can forward your request to the dedicated department.
Have a nice day!
@@EMMEDUEabs hello ,yes that was me ,thank you for your response . I'm looking forward to the information. . there is conflicting opinions .and I think your company is qualified to provide to give the correct requirements .
Thanks again ,and have a good day .
Very nice
Thank you!
Is it possible to build cantilevered rooms out of this material without providing beams, particularly for a short cantilevered floor overhanged by 30 cm?
Usually there is no problem creating cantilevers of that kind, but obviously you need to do the appropriate checks with structural calculations. In any case, if you email us at info@mdue.it, we can send you example pictures!!!
This is good material and innovation, can I screw ang hung for example TV or split type AC or big mirror on the wall using this type of panel?
Yes, of course. For more information, please write to info@mdue.it :)
@@EMMEDUEabs nice
No doubts about the structural advantages, but EPS with layers of concrete is a big humidity trap. Are you relying from buildings using AC 100% all of the time?
Good morning Dominic!
EPS is water vapor-permeable, making it breathable, yet waterproof. The permeability to water vapor ensures that mold does not develop inside buildings and environments insulated with EPS.
Additionally, please note that the thickness of the panels is variable and is determined only after a thorough thermo-hygrometric assessment, which allows us to assess the potential formation of interstitial condensation. For any further information, feel free to contact us at info@mdue.it. Have a nice day! :)
What is the approximate cost per square meter in USA?
You can contact directly our partner in USA:
Gulf Concrete TECHNOLOGY INC
4739 West Oreck Road,
Long Beach, MS 39560
-----------------------------------------
www.gctm2.com/
sales@gctm2.com
Toll free - 866-936-6416
Thank you!
Is this really durable? Built to last? Earthquake and fire resistant?
Good morning Ms. Rodeza,
yes, as for the resistance to earth-quakes, laboratory tests carried out on full-scale prototype houses have shown that the Emmedue structures withstand, without any damage, earthquakes of seismic accelerations superior than those required by current seismic safety regulations.
While regarding the resistance to fire, Emmedue panels are made of self-extinguishing expanded polystyrene, which is also perfectly confined by layers of reinforced concrete that cover the sides of the panel and prevent combustion.
Its fire resistance has been verified according to international standards through tests conducted in different laboratories.
Moreover, Emmedue panels have proved a great resistance to blast and cyclones. Please, check this link: www.mdue.it/en/advantages.php
or more enquiries, we are at your disposal!
@@EMMEDUEabs I see the Cyclone resistance is only 106.20 km/h which translates to 66 mph which is not even Hurricane strength. Is that honestly the highest tested speed?
Good morning Deza, of course our building system has been subjected to resistance tests of all kinds (load, fire, hurricanes, earthquakes, etc ...) by accredited bodies around the world. If you are interested in learning more, please write to info@mdue.it and we will send you the documentation of your interest. Thank you :)
@@kitinvestments Good Morning Kevin, for technical details I invite you to contact us by email to info@mdue.it n order to be able to send you the technical documentation of your interest, Thanks :)
@@EMMEDUEabs sent
Hi
Please how many floors can we build with this system ?
Would you like give us an example of project that is built with tbis system
Thank you
Please contact whatsapp number 008613365455439, I will provide you with support, the email is amysalemanager@abcn.group
We need that here In the U.S.
Good morning James,
you can contact us at info@mdue.it so that we can put you in touch with the Emmedue panels production plant in the USA.
Have a great day!
This is similar to www.tridipanel.com
My whatsapp is +0086 15336457919， May I know yours? I want to send machine running video to you.
Is the 2nd story just attached to the first story's panels using the metal clips or are additional rebars laid in the 2nd story to support the 2nd story walls?
Hello Adam, in case of a multi-storey buildings, the walls of two consecutive levels are connected to each other by reinforcing bars with a maximum diameter of 8 mm. For any further question, please contact us by email at info@mdue.it!Thank you!
Hi
Am interested in nairobi how can I get you please
Good morning Lawrence,
please contact us at info@mdue.it so that we can give you all the contact information you need.
Have a nice day!
Pls contact : Amy 008613365455439 amysalemanager@abcn.group
what's the maximum area that one roof panel can cover ?
Hello Ahmed! With the Emmedue system it is possible to produce panels of different lenghts and thicknesses.
In the roof, in terms of resistance, it will depend on the stresses it has to bear, that is, loads (as wind, snow, etc.) and the spans (distance between supports). Surface area is a relative measure that depends on these factors. For any further question do not hesitate to contact us at info@mdue.it. Thank you!
What is the name of the equipment used at minute 3:46 to project onto the wall? Thank you.
It's a mortar spayer!
What is the finishing raw materials only cement, sand and conceit or anything else. what size conceit use
Hello Emon! The finishing raw material is a mix of cement, sand, water and additives. The quantities depends on the type of materials you have on site. The max size of sand is 6 mm. For any further question, please write us to info@mdue.it. Thank you!
Seems like you're avoiding questions on can this technology be used to build multi storey buildings 😕
Good afternoon Moses, we are answering to all questions, actually. By the way, of course we can build multi storey buildings too. If you need more details, please contact us by email at info@mdue.it and we will be glad to send you photos of some multistorey buildings we realized all over the world. Thank you! :)
Viva
هل يمكن عمل بلكونات أو أجزاء بارزة cantlever بهذا النظام عن السقوف .
Please, be so kind to write in English. If you need information, you can write to info@mdue.it. Thank you!
Is this available in the GCC?
We have 4 production plants in Saudi Arabia. You can contact this one:
ALIAN INDUSTRY CO. in Riyadh alianind.com/ar/
Do not hesitate to contact us for any further information.
Is it possible to install spiral staircases when using m2 panels? -The staircase wouldn't have to be made of M2 panels.
Sure, it is. Can you write me your email address so I can send you some photos of exemples of stairs realized with our panels or not, but anyway installed in houses built with our system?
@@EMMEDUEabs yes thank you, here is my email.
adam@clarkclub.com
@@adamclark3088 you'll be contacted by email from our technician. Thank you!
Hi,
whats the name of the electric rebar cliper? thats seems very nice!!
Thanks
Hi Cachinhos da lulu
,
What do you mean by "electric rebar cliper"?
The equipment with hot air
Ryobi= makes a battery powered bolt cutter - max diam 3/8inch perhaps. RYOBI 18-Volt ONE+ Cordless Bolt Cutters
Is available in Delhi also
Not at the moment, but we can evaluate to send the panels from the plant in Philippines. Please, write us to info@mdue.it. Thank you!
Hello I would like to know, how is it the soundproof??
Its sound insulation effect is not bad
Hello Daniel,Experimental tests run on the panels have provided optimal results, showing the suitability of the panels even in the most severe conditions, in accordance with the current technical laws.
For further information, please contact us at info@mdue.it. Thank you! :)
What is the density of the eps used in the panel ?
Usually it ranges from 15 to 25 kg / m3 based on structural needs.
For more information do not hesitate to contact us at info@mdue.it. Thank you! :)
Hello, I want to do it in Turkey. Can you provide contact information?
In Turkey we don't have a production plant. The nearest is in Albania and you can contact them here: structeco.eu/contact/
Thank you!
What do you call that plier (with the yellow handle) that they use for joining panels?
Good morning Mariano,
that's a staple gun.
Have a nice day!
Hog ring pliers.
Hi, technically is difficult with nomor workers, i am built 3d panel house, special buld 3 floor without concrete framing, tks
Hi Chinh! I'm not sure I understand your comment. In any case, one of the characteristics of our building system is the ease of assembly on site. For further information, do not hesitate to contact us at info@mdue.it. Thank you :)
Pls contact : Amy 008613365455439 amysalemanager@abcn.group
Is this available in Guinea Conakry
Good morning Tiguidanke, sorry for the dalay of my answer. We don't have any plant in Guinea, actually. The plants nearest your country are in Capo Verde and Algeria. If you need more information, please contact us to info@mdue.it. Thsnk you! :)
In Nepal, is it available?
Unfortunately not. The plants closest to Nepal are in Indonesia, Philippines and Malaysia.
For further information, do not hesitate to contact us at info@mdue.it. Thank you!
Where are you located ?
Emmedue is located in Italy, but our building system can be produced in many countries.
Which geographic area are you interested in? :)
Is it fire resistance ? How to compare with conventional building ? Maximum loading on floor ?
Good morning Sunil! The Emmedue building system has passed the fire tests about which we can send you documentation and videos. If you send us an e-mail to info@mdue.it, it will be our pleasure to send you all the documentation relating to the comparison of our system with the traditional one and the maximum bearable weight.
We wait for your news by email. :)
How does the build and materials cost of a house made with this compare to a traditional cinder block construction?
Good morning and thank you for your interest. A building realized with the Emmedue System costs around 30% less than one carried out with traditional building system. Of course, to be more precise we'd need to know the raw materiala' costs in each country and other details!
Have a nice day!
How does the build and materials cost of a house made with this compare to a traditional cinder block construction?
Is there an agency in South Africa
Good morning Mr. Palmer,
please send us an e-mail at info@mdue.it so that we can give you all the information about Emmedue Panels manufacturers in your area.
Have a nice day!
Pls contact : Amy 008613365455439 amysalemanager@abcn.group
what's the cost per square meter
Dear Lule, It depends on the cost of raw materials at the place of production. Where are you from?
We are a Chinese manufacturer and have our own factory. If you are interested, you can add my whatsapp, +008615336457919, I will send you detailed pictures and video introduction
Is this available in Philippines
Dear Judith, yes it is. Can you write us by email at info@mdue.it? We will send you back all the contact adress and info. Thank you :)
Loft house like this one, not really a one or 2-storey.. pin.it/5S5WhOK
Would it still need post and beams when using these panels?
@@judithbacit1518
We can usually safely say that you would not need any additional structures, just our panels. In our website you can see this type of loft made in Spain, where the columns that are seen are only architectural and not structural.
Have a look here: www.mdue.it/it/gallery.php?s=88&a=&t=&p=
hello friend, My whatsapp is +0086 15336457919， May I know yours? I want to send machine running video to you.
How much per panel
Dear Mr. Ndungu,
actually we don't produce panels, but we sell the technology to produce the Emmedue panels instead.
If you are interested in our technology, please contact us at info@mdue.it
Have a nice day!
Pls contact : Amy 008613365455439 amysalemanager@abcn.group
Buongiorno, qualcuno sa quanto costa al metro quadrato?
Grazie
Buongiorno Signor Spinelli, le comunico che abbiamo inoltrato la sua richiesta al nostro agente di area in quanto ci è pervenuta in questi giorni per e-mail. Provvederemo a contattarla il prima possibile per rispondere alla sua richiesta.
Le auguro una buona giornata!
Ph noumar
How do I get the materials?should I present my plan first?
Hello Gideon, first of all I need to know where you are writing from, in order to understand if there is a production plant in the country of your interest. From there, I can put you in contact with the customer in the area in question to which you can then make all your requests and ask for all the information you need.
My whatsapp is +0086 15336457919， May I know yours? I want to send machine running video to you.
@@epsseriesmachines6965 For any request or information you can contact us at info@mdue.it. But if you want to sell us machines, we are not interested, because we produce them. Thank you.
Contractor rafi 9160938956
can i get in ethiopia?
Dear Mr. Fish, the nearest plants to Ethiopia are in Kenya and Eritrea. Please, contact us by email to info@mdue.it for more information. Thank you.
Pls contact : Amy 008613365455439 amysalemanager@abcn.group
Who is the carrier organism ??? only with shotcrete is achieved. You just make coatings that do not create a carrier organism. Extremely dangerous construction to create cracks.
Good morning Mr Kalfagian, our panels have been subjected to numerous tests all over the world which have demonstrated their mechanical characteristics and their load bearing capacity. These tests are then linked to as many numerous certifications obtained.
When you want, we are willing to talk to you about it in order to show you that the constructions made with our construction system are not dangerous. For more informations, please, contact us to info@mdue.it. Thank you!
I dont.believe this is stronger than hollow block
It is.
u have to understand stress points and also how different materials combined are more stronger than a pure concrete block, also that metal mesh is jointed with other panels and it makes the whole walls very strong
hello i send email to you for more information i am located in south america please let me know or reply on my email
thank you
Hello, can you write me your email address to verify what has happened to your email? Thank you! :)
@@EMMEDUEabs i did send you email from vir_fernandes@hotmail.com
@@flamingobrokernv3987 Dear Mr Fernandes, I have checked and your email has already been forwarded to our area sales manager who will contact you as soon as possible. Thank you! :)