Thank you! I see a lot of comments saying they want to see you remove the bearing but, I was looking for a video that explains that it’s possible to change the whole hub without the crazy process to swap the bearing! Plenty of videos out there that show bearing replacement!
How much different is this for a 4x4? I have an 08 Sorento. I was told the assembly is pressed onto the axle, so for replacing the hub assembly, is there more to do than this? The Kia manuals shows taking off the entire knuckle assembly, but that was for a bearing replacement- needing a shop to press it out. Thanks for the help.
interesting as i have sportage 2009 lx kia assuming thats front wheel bearing hub also good note make sure key in new bearing .i say that cause breaks on mine are different .Slow and easy consistent when i work on unfamiliar thing s video like watch and learn nice simple video
I tried this fix on mine but the wheel bearing is froze. I tried prying, pulling, and beating to no avail. Any ideas on how to remove a frozen bearing?
The hub assembly includes the part your wheel mounts to, and the bearing. You can having the bearing pressed in by a repair shop if you choose to just have it replaced.
The assemblies for the rear are one entire unit. Four bolts from the back. Remove and hang the brake caliper and then pull the four hub bolts from the back. 14 mm 1/2" drive socket. A 3/8th's inch ratchet wont cut it. Torque em down to spec. Good vid Jo. The Optima ( 2002) I did doesn't have the inner nut. It's all one unit from Napa for about 60 each side. In order to replace the rear parking brakes on the Kia Optima, it's by far easier to pull the rear hub assembly out of the way there by affording you more room. Use a lot of PB Blaster or Liquid Wrench and soak em down good. Rood dirt and the years will rust them in place. In order to defeat the rust, attempt to tighten the four bolts first , THEN back them out.
Sorry about that. After I found it was bad, I decided to replace the assembly. I had problems with pressing a similar bearing on another vehicle, and had to do it a second time. I felt it was more cost effective to replace the assembly. I apologize for the misleading title.
Watch this video instead. Much better. ruclips.net/video/aAM52z76R4k/видео.html
MAN...YOU DIDN'T DO WHAT WE ALL WANTED TO SEE....THE ACTUAL REMOVAL OF THE OLD ONE.
Thank you!
I see a lot of comments saying they want to see you remove the bearing but, I was looking for a video that explains that it’s possible to change the whole hub without the crazy process to swap the bearing!
Plenty of videos out there that show bearing replacement!
How much different is this for a 4x4? I have an 08 Sorento. I was told the assembly is pressed onto the axle, so for replacing the hub assembly, is there more to do than this? The Kia manuals shows taking off the entire knuckle assembly, but that was for a bearing replacement- needing a shop to press it out. Thanks for the help.
I'm going to say it's completely different. Sorry.
$1400. Is what KiA is charging . I just went to Kia and that's the quote that I got was $1,400 for everything it looks pretty easy to replace
For the rear?! Is it a 4 wheel drive?
interesting as i have sportage 2009 lx kia assuming thats front wheel bearing hub also good note make sure key in new bearing .i say that cause breaks on mine are different .Slow and easy consistent when i work on unfamiliar thing s video like watch and learn nice simple video
+Melain Kinney This was the rear wheel bearing.
I tried this fix on mine but the wheel bearing is froze. I tried prying, pulling, and beating to no avail. Any ideas on how to remove a frozen bearing?
The assembly is frozen to the base?
This is well explain I like your edit
THIS IS A WHEEL HUB REPLACEMENT, NOT JUST WHEEL BEARING. ANYONE CAN DO THIS... WE WANT TO KNOW HOW TO GET THAT BEARING OUT.
Jeff Doan the
What's the difference between hub and bearing?
The hub assembly includes the part your wheel mounts to, and the bearing. You can having the bearing pressed in by a repair shop if you choose to just have it replaced.
Seems straightforward
Which is it 30mm or 32mm u cant confuse them man..
The only thing is they said I need a wheel alignment after that's done?
Is it a 4 wheel drive? Is it the front or rear wheel bearing?
NEEDED TO SEE HOW YOU REMOVED IT BRO
Search my videos. I did a more detailed one.
Gracias amigo Dios les bendiga
have you been working on that mustang?
I have. Finishing up the right front frame rail. Just didn't do a video of it since I just did the left side.
Is that a 2 or 4 wheel drive Sportage?
2 wheel drive. Or front wheel drive if you prefer.
Hi.
4x4 front wheel bearing reemplacement .
Kia sportage 4x4 2002
Wrong dude, no large nut to remove. 4 hard to get to bolts in back! Should let viewers know.
You replaced the entire hub bub. Your video title is misleading.
+ditto True. I corrected the title. It was simpler to just do the assembly. Thanks.
The assemblies for the rear are one entire unit. Four bolts from the back. Remove and hang the brake caliper and then pull the four hub bolts from the back. 14 mm 1/2" drive socket. A 3/8th's inch ratchet wont cut it. Torque em down to spec. Good vid Jo. The Optima ( 2002) I did doesn't have the inner nut. It's all one unit from Napa for about 60 each side. In order to replace the rear parking brakes on the Kia Optima, it's by far easier to pull the rear hub assembly out of the way there by affording you more room. Use a lot of PB Blaster or Liquid Wrench and soak em down good. Rood dirt and the years will rust them in place. In order to defeat the rust, attempt to tighten the four bolts first , THEN back them out.
Sportage 2013 réar bearing
U gotta show the work. This sucks
I agree with you.I should have done a better job on this one.
Horrible video....he didn't shows the necessary steps to replace the wheel beating.
Sorry about that. After I found it was bad, I decided to replace the assembly. I had problems with pressing a similar bearing on another vehicle, and had to do it a second time. I felt it was more cost effective to replace the assembly. I apologize for the misleading title.