Just bled M365 using this kit and technique and it worked GREAT! thank you to EZmtb! PS I also found the Shimano instruction manual for dealers and the procedure is exactly the same :-)
Thank you for the video! I haven't been able to use my bike for a while because I couldn't figure out how to properly bleed the brakes. I didn't even realize there was a side hole in the caliper for the fluid to drain out! Thank you so much for taking the time to make this video!!
Bleeding the brakes is the easiest part of servicing. Bikes. Anyone can learn in 5 to 10 minutes. Only takes 5 to 10 minutes to do. In my opinion straightening wheels is the hardest.
What is good replacement for M355 hydralic brakes as of today that would fit? Good video, thanks. Bled a few times but not gripping power. Rotor thickness is good, maybe I just better quality brakes - I am not using Shimano bakes. Front are doing well.
Great video. Im confident that I can bleed my brakes now after watching this video thanks. Be sure to buy the kit, it's got everything you need. I subscribed.
Useful tutorial, but will the brake fluid included in the kit be enough for what is shown in the video? It looks like there is a little new bottle opened for each step. lol
Mujahid Pediongco no it is not required to put in new pads after bleeding. However, if you get the mineral oil on the pads or rotor, then you will have to replace them because they will become ineffective.. That’s why they took the pads out in the beginning.
Just bled M365 using this kit and technique and it worked GREAT! thank you to EZmtb! PS I also found the Shimano instruction manual for dealers and the procedure is exactly the same :-)
Thankyou.
Excellent walk through.
AND the Kit is brilliant value.
Especially if you have a number of brake brands to deal with.
Passing this on !
One of the Best video ever on bleeding.
I bought this kit and followed your video. Worked great. Very impressed with quality of the kit
Thanks.
Jason Barnes are they good?
Yeah are they?
I just fixed my brakes liquid. This video was so helpful. Thanks a lot.
Thank you for the video! I haven't been able to use my bike for a while because I couldn't figure out how to properly bleed the brakes. I didn't even realize there was a side hole in the caliper for the fluid to drain out! Thank you so much for taking the time to make this video!!
Just used your kit and works great. Top quality made the job easy.
Konecne normálne video🎉🎉
Mi è appena arrivato il kit e volevo seguire un tutorial. Questo weekend, mi metto all! Opera.
thanks, man. This is first helpful tutorial
О русский
Thank 4 uploading such a nice video with step by step what to do. Mine brakes are m445 and it was very helpful for me. Happy new year guys.
nice video,bleeding the brakes for me its the most difficult part of bike service
Bleeding the brakes is the easiest part of servicing.
Bikes.
Anyone can learn in 5 to 10 minutes.
Only takes 5 to 10 minutes to do.
In my opinion straightening wheels is the hardest.
@@scottrocks1993 i couldent agree more is so dump difficult
What is good replacement for M355 hydralic brakes as of today that would fit? Good video, thanks. Bled a few times but not gripping power. Rotor thickness is good, maybe I just better quality brakes - I am not using Shimano bakes. Front are doing well.
Great video. Im confident that I can bleed my brakes now after watching this video thanks. Be sure to buy the kit, it's got everything you need. I subscribed.
Useful tutorial, but will the brake fluid included in the kit be enough for what is shown in the video? It looks like there is a little new bottle opened for each step. lol
Mine didn't come with fluid, I just bought a 1L Shimano bottle that'll probably last me 10 years lol
this is what I'm looking for. thank you. keep it up!
Hi just I want to ask is this for all shimano break disc ?
please answer me before buying this oil
Thanks for the help!
Thanks so much, muchas gracias desde costa rica, espero algun día hagan videos en español, muy bien explicado 💚👍
Queria saber como tirar as fluido antigo e injetar o novo🚲e quanto ml usa em cada freio
mks banyak petunjuk pengisian oil rem hidrolik.
Great video, super informative!
Would be possible you do this procedures using the XT-M 785 from Shimano breaks? I do not explain at all, but It is no so clear to me yet.
Newbie question. Is this different compared to mt200? If yes which one is better. Thank you
Zrobiłem pierwszy raz po mojemu i Ok
Musiałem skrócić przewód bo był za długi
How much quantity of Miniral oil is required to bleed per break system. ?
60ml will be perfect
i bought a universal kit, not the master kit, and this don't came with the bleed block, only with two pieces that didn't fix
brilliant video thanks
Great Video where can i buy this artikl ?
Pls share Torqsi tools size Details
M355 vs MT200?
Can I combine the BR M 355 with new ST-R 7020 while using SM-BH90 hydraulic wires?
Only one complaint - the 7mm and 8mm spanner included is made of poor quality soft metal and next to useless
You get what you pay for. Go bit park tool. I'm sure your wallet will be fine
physic say need to bleed down to up, not vice verse. Air bubles going up, not down :)
Well done 👍
AWESOME VIDEO,MANY THANX...
Good job.
Isn't easier to push new fluid from the bottom?
could argue thats where the dirt enters and accumulates, dont think it makes a big difference
Can I use this kit with Road hydraulic system with STI levers ?
good job
Excellent! :)
Is it required to use new pads?
Mujahid Pediongco no it is not required to put in new pads after bleeding. However, if you get the mineral oil on the pads or rotor, then you will have to replace them because they will become ineffective.. That’s why they took the pads out in the beginning.
BUT GOOD IDEA ALCOHOL FIRST AND AIR PRESUME AND THE LAST OIL INDEPENT TECHNIQUE THAT...MY OPINION ONLY
Why it has to be twice
i have your kit bleed low price good part nice make more good product thx for your good kit ( i have bad english sorry )
will this fit on Tektro Auriga? I must fill it through screw hole down on brake.
i had to fill mine with DOT3 because it is -25 outside.
I’ve been drinking and I’m confused as shit!! Way to many turn this Alan while squszn this lever!!
or- just bleed it the way shimano tells you to bleed that brake? which is basically the same way for ALL shimano brakes more or less....?
The fuct that you dont use the oficial simano mineral oil isnt a problem like you can use evrything that is coptatible with simano
So what is the kit part number?
Does this funnel/kit work with tektro auriga hidraulic brakes?
you can't use mineral oil for regular hydrolic fluid and vise versa (including the kits)
Show de bola
Mrc
Lo malo del video es q muestran como lo hacen más no porq lo hacen o para q lo hacen
My oil was black :(
I just got this kit and going to bleed soon, I know for sure my oil is going to be black but looking forward to fresh clean oil
@@smallhatshatethetruth7933 so how did it work out
ool why you do it so complicated?
same as park, no different
Mas rem ku patah terus cara masangny gmana ya
Hello everyone, do you have any recommendations as a substitute for bleed block (at 0:29)? Thanks in advance
Old brake pads with some cardboard in between.
@@newttella1043 thank you
Top 20😉
😊😅😮😢🎉😂
Good afternoon please remove the video pumping brakes Shimano BR-M395 Hydraulic ....
😊😅😮😢🎉غ
Dude what are you doing 😡
way, way, way too complicated. is not that complicated,
it actuallly looks very ez for me lol. I even checked shimano insturctions and it looks absolutely the same
Those brakes are so cheap lol
Ur comment look so cheap and useless
Lol
@@hanyaoyap1826
Your grammar is so cheap
(Jk) :)
@@ketmax2805 Where's your punchuation? Amateurs!
@@ketmax2805 u are welcome
:)