Sir This the easiest lesson I have seen SALUTE I just bought some 2.2 axial for 1.9 prolines. My favorite sales rep repeated "take your time with these" I aint scared though a lil nervous yes cuz its my first time...Thanks for the video!!!!!
Great video! I just bought my first RC Crawler to pick up a hobby - that looks like a great upgrade or rather an enhancement... I like the way that tire sits on those rims...
.. i used (3) longer screws for mounting (deep woods with 110mm donut) until the ring was fixed; put in the rest and replaced the long ones. helps a lot!
Hey dude, so the performance wasn't hindered by the excess stretching due to the bigger rims? And the weight added contributed to the grip of the tires I'd assume? I'm on the verge of ordering 2.2s for my 1.9 set of tires but wanted to know a bit more on those two aspects. Thanks in advance!
@@s6ef4enko no, the performance wasn't hindered. I mean you don't have as much sidewall give 🤷 but kinda comes with territory. The added weight of the 2.2s does indeed help with down low weight. Hope this helps. Tribe on! #T4L
@@TribeRc Thank you so much man! And one last question (forgot to add it to my previous comment) - what about the width? The 2.2" are usually like ~5.5mm, from what I've seen - 26mm on 1.9" rim to 31.5mm on 2.2" rims. Is that an issue when stretching them onto the 1.9" tires? Like they won't buldge sideways?
I get they look cool but hiw do they proform from what I seen it looks as if that would make the tire quite stiff might 6 alright for trail rig not so good for rock crawing
I was just thinking about this today and this popped up. Love the video, love the look!! My question is how does it perform for trail crawling? Any way we could see these in action over various obstacles etc?
To be honest bud I did this video and haven't touched anything since. I'm gonna try and get my s&%t back together and do some filming and yes that would be one of the videos I shoot. #T4L
@@TribeRc I hope you get back to it. You did a great job with it and I think you could continue to grow your channel since you think outside the normal.
Just out of curiosity - is the thread lock really needed for wheels, if there is tension provided by squashed rubber? Do the bolts really come undone on the wheels?
.. there is no tension from the rubber, because the rim parts are directly bolted together. not always but in this case especially it´s higly recommended to use glue - you´re not gonna find any of the screws outside if it becomes lose!
Not throwing Shade at you, but compressed foam stretched tire way too much if you will preload with the foam on the tire as well as with the foam equals no good for crawling need more sidewall
@@TribeRc Keep rockin great videos!!! Post the video links in FB groups, put a subscribe graphic in your video a few times. FB has been a great way for me to get more views and subs. Also get Tubebuddy, look at the keyword explorer. It will give you a lot of good info on your video titles, just one word in a title can make a big difference with the algorythim. The most important part is the videos, you are making good content and it just takes time to get flowing, but once it does the subs and views just start growing. You are well on your way my friend!!!
No questions are silly. Yes this could be consider just for looks, however it does have some advantages. For example you have less sidewall which could increase your side hill capabilities. Among a few other advantages. Thanks for watching!
Sir
This the easiest lesson I have seen SALUTE
I just bought some 2.2 axial for 1.9 prolines. My favorite sales rep repeated "take your time with these" I aint scared though a lil nervous yes cuz its my first time...Thanks for the video!!!!!
You got this... Thanks for watching.
Checked out your video I bought the same set rims and tires excellent look and choice great video 🔥✌🏽👊🏾
After finding this video it convinced me to pull the trigger on getting them. Thank you for such an informative video
Your very welcome. Be sire to hit the subscribe button amd follow the channel. More releases coming in near future.
Great video! I just bought my first RC Crawler to pick up a hobby - that looks like a great upgrade or rather an enhancement... I like the way that tire sits on those rims...
Thank you! Enjoy... #T4L
.. i used (3) longer screws for mounting (deep woods with 110mm donut) until the ring was fixed; put in the rest and replaced the long ones. helps a lot!
ran across this video, those wheels are sweet might have to pick me up a set, nice set up..And even have the link to the wheels big thumbs up
Great job buddy, very informative, I need to do this, I'm off to order some 1.9 tyres now 🤣
It's a addiction. #T4L
Yep, rubber stretches. The only minor issue might be that, for a rock crawler at least, the tire will definitely be a bit less flexible.
Yeah this was worth it can't wait to put them on
That looksreally good man im not very good at tires but im gonna try it
Thanks bro! It's not hard, just alittle Patience. Enjoy
Great explanation
Great video! Thanks for the help!
You bet! Thanks for viewing. #t4l
Thanks man.
Thank you it took three hours for me and I still didn’t do it so I looked on youtube
He's the Bob Ross of tire fitting! 😁😁
I'll just paint alittle tree here, and maybe one here, bahahahahahahhaah
@@TribeRc happy little tires😊
HAPPY HAPPY TIRES!!!🤣🤣🤣🤣
@@TribeRc maybe this big tree right here has a little tree next to it so it doesn't feel so lonely 😇😂😂😂😂🤙🏻🔥😎🔥👌🏻
Nice work!
Video coming soon of how they perform. Thanks for watching. Hit that like/share button if you would. #T4L
And now ur foams are gonna be real firm and gonna make ur performance suck more. Good job.
"Today we're going to talk about the elephant in the room"
*Don't talk about yourself man*
Very humorous
Those rims are good I have em but hard afbto bead anything on the 2.2 rim version
Cool 😎
Thanks brother. #T4L
I did this with a set of 1.9” wheel and touring tires for my 1/10 touring car. They worked perfect.
Nice! #T4L
Hey dude, so the performance wasn't hindered by the excess stretching due to the bigger rims? And the weight added contributed to the grip of the tires I'd assume? I'm on the verge of ordering 2.2s for my 1.9 set of tires but wanted to know a bit more on those two aspects. Thanks in advance!
@@s6ef4enko no, the performance wasn't hindered. I mean you don't have as much sidewall give 🤷 but kinda comes with territory. The added weight of the 2.2s does indeed help with down low weight. Hope this helps. Tribe on! #T4L
@@TribeRc Thank you so much man! And one last question (forgot to add it to my previous comment) - what about the width? The 2.2" are usually like ~5.5mm, from what I've seen - 26mm on 1.9" rim to 31.5mm on 2.2" rims. Is that an issue when stretching them onto the 1.9" tires? Like they won't buldge sideways?
@@s6ef4enko it does bulge on side alittle but nothing ungodly, I kinda liked the look it presented
they look like low profile tyres. I might do the same to my tyres. Thanks.
I get they look cool but hiw do they proform from what I seen it looks as if that would make the tire quite stiff might 6 alright for trail rig not so good for rock crawing
you need to magnetize your hex driver(s)
I was just thinking about this today and this popped up. Love the video, love the look!! My question is how does it perform for trail crawling? Any way we could see these in action over various obstacles etc?
To be honest bud I did this video and haven't touched anything since. I'm gonna try and get my s&%t back together and do some filming and yes that would be one of the videos I shoot. #T4L
@@TribeRc I hope you get back to it. You did a great job with it and I think you could continue to grow your channel since you think outside the normal.
@@vknight7376 thanks! That means alot. You hardly get these comments which makes it hard to want to continue. #T4L
Much more realism!
Thank you
Hi I try to use louise CR-champ 1.9 with 2.2 beadlock rim. Bu I don't know which rim thickness 25/35mm should I pick. Any suggestion?
Not 100% sure on the answer to this but I'd say it's self preference (how wide do you want them to look)
Just out of curiosity - is the thread lock really needed for wheels, if there is tension provided by squashed rubber? Do the bolts really come undone on the wheels?
Good question.. Ot may or may not be needed, but it doesn't hurt. I guess more of a assurance.
.. there is no tension from the rubber, because the rim parts are directly bolted together. not always but in this case especially it´s higly recommended to use glue - you´re not gonna find any of the screws outside if it becomes lose!
Would these fit a Blackfoot RC truck please comment back if you should know or not thank you wheels are sharp looking
If the Blackfoot has 12mm hex it should fit
@@TribeRc OK thank you very much and where did you purchase these and what are they called
I wanna say i got them on Amazon. They are not name brand as I'm aware of.
How do they go on the axial? Like thers no hole in the middle?i got the tire together but i dont get how it gies on now
Youll have to remove the center decorative cap from rim prior to install
Does stretching the 1.9 over the 2.2 wheel lessen the Height of the tire after mounting on the larger wheel?
It will shorten the sidewall on 1.9 yes, however dont think youll mind height
Not throwing Shade at you, but compressed foam stretched tire way too much if you will preload with the foam on the tire as well as with the foam equals no good for crawling need more sidewall
They seem suitable for a sct 4x4
The tread on them could absolutely be SCT Racing..
Saw the post on FB too, Got you Subbed and liked. I'll start runnin the playlists and get you some watch time and views....👍👊👍 T4L 💯
Thanks my brother. Teach me sensei!
@@TribeRc Keep rockin great videos!!! Post the video links in FB groups, put a subscribe graphic in your video a few times. FB has been a great way for me to get more views and subs. Also get Tubebuddy, look at the keyword explorer. It will give you a lot of good info on your video titles, just one word in a title can make a big difference with the algorythim. The most important part is the videos, you are making good content and it just takes time to get flowing, but once it does the subs and views just start growing. You are well on your way my friend!!!
So the foams inside are the foams from the 1.9 tires? Did you modify the foams at all
Yes sir, they are from 1.9 tires. No u didn't modify foams just stretch over rim
@@TribeRc awesome thanks for the reply!
I am new to the hobby so this is prob a silly question. is this just for looks?
No questions are silly.
Yes this could be consider just for looks, however it does have some advantages. For example you have less sidewall which could increase your side hill capabilities. Among a few other advantages.
Thanks for watching!
Thank you for taking the time to answer. So its like low profile tyres on a real car. plus looks cool
I'm not trying to sound like a dick or anything, but what exactly is the advantage / purpose of this over simply just buying 2.2 tires?
Just to say it was done, and it looks prettt cool
@@TribeRc the only thing I could think of that makes any sense doing this, is it gives the tires a low profile look.
Red Or orange this wheels ?
Red
Hi ~ Any suggestion for loctite? 243 222 242 ?
Blue loctite, wouldn't use red (permanent)
@@TribeRc ok got it
Why?
Why not? Thanks for watching #T4L
What You need is a little, scaled tyre lever You fool! ha ha ha ha
Bahahahahahahahahah, little worker gnomes
Don't cheep out buy the right tires
It's not a "cheap out" I don't think
I believe it's more for a custom look