To reduce the headspeed to a desires RPM, you can order a specific kV motor from Egodrift. I have two, and the consensus is that they run cooler than many others, making them ideal for scale builds where air flow can be an issue.
Flybuilder, There are so few of these vids out there. I'm currently working on a beat up 2nd hand md500e fuse for my stretched 700e v2 and I keep watching this video over and over and over. I'd like to thank you for putting this up. Stay loose! -BF
@@RC_B5 Great! Up n flying. Cosmetics will get better but I'm happy for now. Truth havent decided on scheme/theme yet. Cant remember how to PM/email on here but I'll send you some pics if you want
Very informative! Thank you so much for taking the time to post this to youtube. Congrats on a really nice scale heli that can also do some great sport aerobatics.
Hello, very nice build. I am considering putting my Trex 700e V2 into the same fuselage. My question concerns the tail control rod. Do you remember where you got it? Also what length, how did you determine where to exit the tail boom and were you able to fit the standard control rod guides onto the boom? Thank you for any advice you may provide.
Could you please help 2 question I have the exact same set up that you have what size shaft 12mm did you get And 2nd is what size mm main blades and tail blades did you use you did an amazing job on your Heli again I have the same 700E and same head and fuselage
Impressive review indeed Flybuilder, thank you for the very helpful info. Would love to see a flight video as you did with the JR and Airwolf. Particularly interested in how well the main gear is doing with the 10T pinion with the fairly high loading of the Witte blades?
I’ll try to get one! The main gear has at least 100 flights on it with no visible wear at all with the 10t pinion. I have pulled hard Gs at fairly high head speeds and very low head speeds on the Witte blades. They are awesome. Actually- I had a mishap not long after I shot this vid. Got a new Futaba 18SZ transmitter and copied the file over from the old 14SG. Well- that put a bug in the throttle cut- hard to explain why but on the first flight with the new transmitter, I flipped her over inverted like usual and the motor stopped. Oh my. This about 10 feet off the beach. I managed to roll it upright before it landed hard in the gravel. The blades hit beach wood and gravel. Initially I figured they were done. Upon inspection- all were scratched but very much intact. One blade really scratched and gouged badly. Anyway- some thin CA and after a few repairs to the airframe I flew it. Scared at first… but have dozens of flights on it since. Blades holding fine. They are tough. Haven’t decided if I want to drip another $500 for new ones and a piece of mind.. anyway, if nothing else it’s a testament to their resilience
@@flybuilder great save by the sounds! Would you by any chance remember which main shaft you used, and did you modify the elevator servo support to accomodate the 440 motor diameter?
@@Scottheli99 I honestly can’t remember which shaft I ended up using. If memory serves I bought 4 or 5 different shafts to decide. I did have to grind a little on the elevator servo holder just a little to clear the motor.
Thank you very much for the helpul info. Please feel free to join our RC Scale Helicopters NZ page on “you know what book” …..no “links” allowed here 😎
Thanks! The legs are solid wood with a glass wrap. So too sketchy to try to fish wires- so I ran the wires from the light through the skid tube to the back of the skid, through the side of the plastic cap, forward on the exterior of the tube along the inside (wrapped in black heat shrink and hit glued to skid), then up the exterior inside of the rear legs (in red heat shrink and hot glued), then through the fuse just under the opening of the leg. Hope that makes sense.
To reduce the headspeed to a desires RPM, you can order a specific kV motor from Egodrift. I have two, and the consensus is that they run cooler than many others, making them ideal for scale builds where air flow can be an issue.
Flybuilder,
There are so few of these vids out there. I'm currently working on a beat up 2nd hand md500e fuse for my stretched 700e v2 and I keep watching this video over and over and over. I'd like to thank you for putting this up. Stay loose!
-BF
29lives, hows yr progect going? im having the same as you 700L with Funkey md500
@@RC_B5 Great! Up n flying. Cosmetics will get better but I'm happy for now. Truth havent decided on scheme/theme yet. Cant remember how to PM/email on here but I'll send you some pics if you want
Boy-O-Boy she is so dang gorgeous!!!
Very informative! Thank you so much for taking the time to post this to youtube. Congrats on a really nice scale heli that can also do some great sport aerobatics.
Absolut amazing I got 800 size pht 3 love yours / my is 500 E !
Nice build. I’d love to see a flight video.
Can you post the way you have this frame mounted to the floor a little closer please
Hello, very nice build. I am considering putting my Trex 700e V2 into the same fuselage. My question concerns the tail control rod. Do you remember where you got it? Also what length, how did you determine where to exit the tail boom and were you able to fit the standard control rod guides onto the boom? Thank you for any advice you may provide.
Great setup
Could you please help 2 question
I have the exact same set up that you have what size shaft 12mm did you get
And 2nd is what size mm main blades and tail blades did you use you did an amazing job on your Heli again I have the same 700E and same head and fuselage
legit, would love to see a flight video!
Thats a beauty!
Nice! a Have The Blue Version just need to know the lights set package the i need to hook mine up,thanks..
Does Roban still make these fuselages? It seems like they are always out of stock.
Hi try mini magnets on the doors
Nice helicopter
Impressive review indeed Flybuilder, thank you for the very helpful info.
Would love to see a flight video as you did with the JR and Airwolf.
Particularly interested in how well the main gear is doing with the 10T pinion with the fairly high loading of the Witte blades?
I’ll try to get one! The main gear has at least 100 flights on it with no visible wear at all with the 10t pinion. I have pulled hard Gs at fairly high head speeds and very low head speeds on the Witte blades. They are awesome. Actually- I had a mishap not long after I shot this vid. Got a new Futaba 18SZ transmitter and copied the file over from the old 14SG. Well- that put a bug in the throttle cut- hard to explain why but on the first flight with the new transmitter, I flipped her over inverted like usual and the motor stopped. Oh my. This about 10 feet off the beach. I managed to roll it upright before it landed hard in the gravel. The blades hit beach wood and gravel. Initially I figured they were done. Upon inspection- all were scratched but very much intact. One blade really scratched and gouged badly. Anyway- some thin CA and after a few repairs to the airframe I flew it. Scared at first… but have dozens of flights on it since. Blades holding fine. They are tough. Haven’t decided if I want to drip another $500 for new ones and a piece of mind.. anyway, if nothing else it’s a testament to their resilience
@@flybuilder great save by the sounds! Would you by any chance remember which main shaft you used, and did you modify the elevator servo support to accomodate the 440 motor diameter?
@@Scottheli99 I honestly can’t remember which shaft I ended up using. If memory serves I bought 4 or 5 different shafts to decide. I did have to grind a little on the elevator servo holder just a little to clear the motor.
Thank you very much for the helpul info.
Please feel free to join our RC Scale Helicopters NZ page on “you know what book” …..no “links” allowed here 😎
@@flybuilder have sent you a message on messenger
Great build. How did you get the wires to the skid port and stbd lights?
Thanks! The legs are solid wood with a glass wrap. So too sketchy to try to fish wires- so I ran the wires from the light through the skid tube to the back of the skid, through the side of the plastic cap, forward on the exterior of the tube along the inside (wrapped in black heat shrink and hit glued to skid), then up the exterior inside of the rear legs (in red heat shrink and hot glued), then through the fuse just under the opening of the leg. Hope that makes sense.
Hi - do you recall any flight time details at all please?
DXe Spectrum
Did you fliped install the main gear one way bearing? thx in advande
Whats the quality of the fuse Like ? i have the Funkey 500D With the 700E Mechanics ,
how high is the helicopter from the landing gear to the rotor head
Hi! How did you do the tail pushrod just? I got mine yesterday can’t figure it out the tail pushrod that I have is way too thick..
Did you ever auto it and how did those blades do if you did?
Never auto’d this bird.
Do you run the full 12S dual 6S packs or do you fly a single 6 cell pack?
Hi , how did you move the Align 700E tail rotor to the other side , ?
Just reverse components on the tail rotor assembly and flip over the one way bearing. It’s quite simple.
dose the align 700ncome with the kit
what speed do you fly with this motor
Hi, can you provide the contact details for the guy that makes the blades please? I can't find him
Sorry for the delayed response- here is his email
Witte-Helicopters@web.de
Thanks, I found him in the end and I now also own the same blades 👍
Basics !
Ok, guess you ain't going to fly it . Have a nice day . To much talking. Sorry , just thought you were going to fly it.
Hi, have sent you a message on your messenger 🙂