BTW You can make this as large as you want, so if 10MMF/s is not enough for you, you can just make more untill you're satisfied. Also, I forgot to connect 5 of my water pump 2s into the gas burners, so just remember to connect those.
@@time_driver-o9q get power shard jk so you put a boiler loop the turbine then send reapeat this 5 time then put on a boiler with the used water Going to the left water input the design I got this from this ruclips.net/video/lZuHMmnfAcI/видео.htmlsi=qS1FRAHqETItLSkm the only thing I change is the one extra boiler and to send the hot water to the 10 boiler using silo
@@time_driver-o9qwhy my reply gone anyways so take a boiler loop the turbine sent the used water to another boiler reatpeat it 5 times and when you have 5 boiler chained sent the used water to a boiler with the used water to left input configuration mostly the design I is this ruclips.net/video/lZuHMmnfAcI/видео.htmlsi=qS1FRAHqETItLSkm the only difference is the one extra boiler and to send the hot water to the 10 boiler using silo
3:14 for everyone wanting to use the water produces from the condensers. 3 condenser produces the same amount of water as 1 water pump 2. Therefore to supply the two gas burners, you need 9 water pumps 2 as well as the water from the condenser. For the crude oil, the 3 condensers produce a little bit more than the liquid boiler can handle thus put a fluid silo and/or a overflow valve to send to other sources eg. sell in liquid depots. Hope this helps :)
A little later game you could make a 7m dollar cheap farm for 24mmf/s using the diesel produced from coal liquefaction plant going into 10 advanced oil separators (5 using heavy oil, 5 using light oil) which can power 4 LDE making 24mmf/
fun and useless fact: Hydrogen (can be gotten from electrolysis plant by inputting water, getting oxygen as a bonus) can be used in a gasburner. 400C is actually the max temp for coolant, so it doesn't change. The reason why this is useless is self-explanatory for late-game players, but if not, electrolysis is extremely power-consuming and takes like 2 years to make 60L of hydrogen
I have a problem with the setup, when I connected everything to the power grid so that the turbines would start, the last two turbines in each row did not receive enough water and produced almost no energy, is it some mistake on my part or did the game mechanics change? (one factor is that the first turbines in each row take more water leaving the last ones without water)
Check if your turbine is outputting the water into the dump or check if your boiler is at above 100C producing steam and of course check your pipe connections
@@RedFeint they are outputting the water and the boiler is over 300C and i feel like the turbines doent generate as much much power as i have hoped. Also do i have to reconnect the right output to the main pipe for every boiler?
@@ngocanhnguyen7419 Only to heat the up the boiler to above 100C then only connect the boiler output into i'ts input and you can use a power rate calculator to see the amount of power that they are generating one turbine should be making about 420kMF/s to 470kMF/s although the calculator might not be 100% accurate
@@RedFeint i did the same thing but the calculator usually shows around 100kMF/s only edit: i did not know you deleted the dumps at the end. I made more power now but still the 420kMF/s that i had hoped. Everything looks normal, even the steams are moving very smoothly, but somehow, the turbines dont make much power, some of them had 200kmf/s, but others are like not working.
I watched your 8x64x microchip video, everytime i made one of them, it became scrap. It didnt make an putput after it had reached 8x64x microchip. ive done the connections many times, nothing was wrong.
I have a problem. I have this setup and a diesel refinery setup with two large generators to produce me power and i had max power in all my batteries, but i slowly started to lose all my power again in all my batteries. Is that normal and how do I fix this? Also i am not producing enough water to fill up the back boilers for this setup.
Look at your gas burners inputs they should be using 30 liters of water a second, take a look if all of your water pumps are correctly connected and powered, and their inputs for refined gas they should also be using 30 liters of refined gas a second, and look if your refinery is making 60L of refined gas a second, if not then look at the condensers and gas wells and see if you have connected the pipes correctly or if they are getting enough power
@ I don’t see anything wrong with my pipes but it says that this setup is only generating 3 MMF/s and the other one I’m not producing enough refined diesel. Would you like to come to my world and help me out?
@@RedFeint i did something now it gets 4-6 million, i think its because i dont have enough water to heat up so is there a way to have more water to heat up in the boilers?
every turbine should be making around 470KMF/s at max steam temperature so with 20 turbines it should make around 9,4MMF/s, and for me it makes that much
@@RedFeint ok ok ok my bad for the complain, i realised that power rate calculator 2 has max limit of 3MMF/s. I used calculator 3 and showed 12MMF/s . My bad sorry. After this, i readed wiki and wow power rate calculator 2 can measure upto 18MMF/s. Whats wrong in my world
So I me use Two Gas burner to 6 Natural Gas well Boiler to large Turbine 14× +30mmf! Use Gas burner is dumb you! Me to Build large generator Diesel engine 150+ MMF
![Hunxho - Ball Forever [Official Video]](http://i.ytimg.com/vi/nki9ZTF9Uls/mqdefault.jpg)
![LangChain Master Class For Beginners 2024 [+20 Examples, LangChain V0.2]](/img/1.gif)
BTW You can make this as large as you want, so if 10MMF/s is not enough for you, you can just make more untill you're satisfied.
Also, I forgot to connect 5 of my water pump 2s into the gas burners, so just remember to connect those.
nice
thank, now i could run the coal power plant now
edit: nope, I add a few more dg and still eat too much power
My 1 gas burner 60 boiler makes 14 -21mmf
@@time_driver-o9q get power shard jk so you put a boiler loop the turbine then send reapeat this 5 time then put on a boiler with the used water Going to the left water input the design I got this from this ruclips.net/video/lZuHMmnfAcI/видео.htmlsi=qS1FRAHqETItLSkm the only thing I change is the one extra boiler and to send the hot water to the 10 boiler using silo
@@time_driver-o9qwhy my reply gone anyways so take a boiler loop the turbine sent the used water to another boiler reatpeat it 5 times and when you have 5 boiler chained sent the used water to a boiler with the used water to left input configuration mostly the design I is this ruclips.net/video/lZuHMmnfAcI/видео.htmlsi=qS1FRAHqETItLSkm the only difference is the one extra boiler and to send the hot water to the 10 boiler using silo
Just woke up today, glad to see another RedFeint video. My day is great now.
Thank you that means a lot
same cuz i was trying to find a way on how to get a good power source
Thanks Bro! Wonderful Tutorial! You just gained a sub.
thank you for this, ive been trying to power my stuff to make gearbox and needed something to power all of the stuff
Same here
im making gold farm and i prefer using fireboxes
thx for the tutorial i just made a plastic factory and it need a lot of power
3:14 for everyone wanting to use the water produces from the condensers. 3 condenser produces the same amount of water as 1 water pump 2. Therefore to supply the two gas burners, you need 9 water pumps 2 as well as the water from the condenser. For the crude oil, the 3 condensers produce a little bit more than the liquid boiler can handle thus put a fluid silo and/or a overflow valve to send to other sources eg. sell in liquid depots. Hope this helps :)
This is good, but please make a tutorial on how to make machine oil
A little later game you could make a 7m dollar cheap farm for 24mmf/s using the diesel produced from coal liquefaction plant going into 10 advanced oil separators (5 using heavy oil, 5 using light oil) which can power 4 LDE making 24mmf/
Well it's not 24mmf/s actually because 1 LDE produce 10mmf/10s so 4 of them =40mmf/10s or 4mmf/s
@@teerawatboontree2869 ig but what I’m using is 7,000,000 using filtered water so it’s only 24mmf/s you can add distilled into it if you care
@@teerawatboontree2869 oh also it means it makes 10mmf/s for 10 seconds not 10mmf/10 seconds
fun and useless fact: Hydrogen (can be gotten from electrolysis plant by inputting water, getting oxygen as a bonus) can be used in a gasburner. 400C is actually the max temp for coolant, so it doesn't change. The reason why this is useless is self-explanatory for late-game players, but if not, electrolysis is extremely power-consuming and takes like 2 years to make 60L of hydrogen
LETS GO I WAITED FOR THIS 10 YEARS
ez
@@RedFeintWHAT?!!?
@@FELLA672 i had 17 4 6 morde on top and S- and lost cuz team diff
@@RedFeint DAMN BRO UNLCUKY YOU DIS GOOD IN INDUSTRAILIS AND LEAGUE OF LEGENDS HOLY MOLY
Thank you! W power farm
a good power source?
@@aydenzhou6052 Oh yeah XD
ahhh for this i neeed my personal robotssss, im to lazy to do something manualy anymore
I have a problem with the setup, when I connected everything to the power grid so that the turbines would start, the last two turbines in each row did not receive enough water and produced almost no energy, is it some mistake on my part or did the game mechanics change? (one factor is that the first turbines in each row take more water leaving the last ones without water)
hey can you make a video about the best money making methods in industurialist :D
hiiiii cool video thank you
You're welcome!
Clipping the boilers in the large turbines was fixxed😢
thanks
So the ratio is 6 gas well : 3 condensers : 1 gas refinery : 2 gas burners : 20 turbines.
+20 boilers*
why does eveything works like normally, but the turbine doesnt produce energy?
Check if your turbine is outputting the water into the dump or check if your boiler is at above 100C producing steam and of course check your pipe connections
@@RedFeint they are outputting the water and the boiler is over 300C and i feel like the turbines doent generate as much much power as i have hoped. Also do i have to reconnect the right output to the main pipe for every boiler?
@@ngocanhnguyen7419 Only to heat the up the boiler to above 100C then only connect the boiler output into i'ts input
and you can use a power rate calculator to see the amount of power that they are generating one turbine should be making about 420kMF/s to 470kMF/s although the calculator might not be 100% accurate
@@RedFeint i did the same thing but the calculator usually shows around 100kMF/s only
edit: i did not know you deleted the dumps at the end. I made more power now but still the 420kMF/s that i had hoped. Everything looks normal, even the steams are moving very smoothly, but somehow, the turbines dont make much power, some of them had 200kmf/s, but others are like not working.
@@ngocanhnguyen7419 interesting you could send a screenshot and ask somebody on Industrialist's discord, since it might be a glitch or something
I watched your 8x64x microchip video, everytime i made one of them, it became scrap. It didnt make an putput after it had reached 8x64x microchip. ive done the connections many times, nothing was wrong.
Really? Well if you want I could try and make a new video about microchips maybe something has changed....
@RedFeint Thank you, that would be soo helpful.
Alright, I'll look into it!
thank you!
Ive copied 1 to 1 and for some reason my large turbines are only recieving around 40 degrees of water
at first you need to output the water from the output on your boiler so it can heat up
my boilers are stuck at 17 degrees and i followed it all step by step
output the water from the boiler output untill the boiler reaches 100C
good
yes
I have a problem. I have this setup and a diesel refinery setup with two large generators to produce me power and i had max power in all my batteries, but i slowly started to lose all my power again in all my batteries. Is that normal and how do I fix this? Also i am not producing enough water to fill up the back boilers for this setup.
Look at your gas burners inputs they should be using 30 liters of water a second, take a look if all of your water pumps are correctly connected and powered, and their inputs for refined gas they should also be using 30 liters of refined gas a second, and look if your refinery is making 60L of refined gas a second, if not then look at the condensers and gas wells and see if you have connected the pipes correctly or if they are getting enough power
@ I don’t see anything wrong with my pipes but it says that this setup is only generating 3 MMF/s and the other one I’m not producing enough refined diesel. Would you like to come to my world and help me out?
okay
@@RedFeint what is your Roblox user?
@@WhiteTiger_TL Sorry i was busy today could you give me your name instead?
Hello
I keep losing heat in the boiler. Could you help?
Not enough hot water? What temperature are your boilers at
@@RedFeint Had to do the last step a few times. But it is working now.
I have 1 mil and im mid game,should i expand chair farm or build a gearbox farm or idk
gearbox is very very god
go for gearbox, selling 400 gearbox gives you 1 mil
Ty,i have like 8 mil,what should I do?
@@RedXCV what should I do,I have like 8 mil
100 mil for 8x 64x microchip is enough and this gas burner setup?
THIS GAS BURNER SETUP LESS THAN 2 MILS
@@RedFeint this gas burner can power micro chip factory?
@@geometryplay941 Yes, of course!
Edit: You can always make 2 if its not enough since its very cheap and makes almost no pollution
@@RedFeint THANKS I CAN FINALLY MAKE MICROCHIPS !!!!
polski acent AHHH
My coal power plant isnt getting alot of power, how can i make enough
thois
what?
@@Dashgamerz325 Gas burners or large diesel engines those are the best options to power the coal power plant
@@RedFeint I've made the large diesel engine and gas burner setup
Even a few large turbine setups with 320 celcius
whaats the best money farm in mid game
Purple gold probably
it says it should get 10 mmf/s but i only get 3mmf/s do yk why
power calculator 2 can only do 3MMF/s
@@RedFeint i used power calculator 3 tho with high voltage
@@Tea_Enjoyer6 If you do everything the way I did it then it should work, I'm not really sure what you could have done wrong
@@RedFeint i did something now it gets 4-6 million, i think its because i dont have enough water to heat up so is there a way to have more water to heat up in the boilers?
I copied the same as yours yet i only get 3MMF/s.
Btw for me that power is no less but you said it gives 10MMF/s
every turbine should be making around 470KMF/s at max steam temperature so with 20 turbines it should make around 9,4MMF/s, and for me it makes that much
@RedFeint what would be wrong?
@@shariqshaikh2460 your gas burners could be not producing enough hot water
@@RedFeint ok ok ok my bad for the complain, i realised that power rate calculator 2 has max limit of 3MMF/s. I used calculator 3 and showed 12MMF/s . My bad sorry.
After this, i readed wiki and wow power rate calculator 2 can measure upto 18MMF/s. Whats wrong in my world
@@shariqshaikh2460 bro
doesn't work
You must've done something wrong then
So I me use Two Gas burner to 6 Natural Gas well
Boiler to large Turbine 14×
+30mmf!
Use Gas burner is dumb you!
Me to Build large generator Diesel engine
150+ MMF