Thanks, Yes, that would be absolutely top, but because of the height of the shock towers, the body probably wouldn't fit there, anyway, now the plan is to make a rally car, so...:D
Can't wait to print it, already have NOMAD and it's amazing, love to see that it's based on NOMAD chassis style. Also really glad that you switched to dogbone drive shafts instead of CV shafts
:D Yes, I wanted to use the same material as on the nomad, just make everything smaller. Yes, if you drive this car to the edge, and I know that you will drive it to the limit, then Full Dogbones are the way :D
@@serhatozkara3281 I wanted to avoid this style of arms for the nomad at all costs, but I'll probably end up doing something similar for the nomad soon. :)
@@vhrte49 Well, I'm not working on it at the moment, because now I'm working on a rally car, but that should be done in 2 to 3 months, and then it's the crawler's turn. 🙂
Design can be simplefied a lot by just oauzing the print and do a colour change. Also,i dont know your bed size but if its 25x25cm you can print the whole chassis as 1 part...
Yes, it is possible, but not everyone has the option of color change. My largest printer is 40x40 cm, but for a one-piece chassis you would need at least 34 cm (33.77 cm to be exact) and currently a one-piece chassis is available in the file as an option.
@PatrikJKS every printer can pause a print and you can do the color change manually. You don't need an ams to do multicolor prints:) 34 cm yeah that's about 5 6 cm to long of a 25x25 bed diagonal:) I print 29 to 30cm long objects on my 25cm bed
@@ripmax333 durability test very well, even if the fennec buggy is not a basher type, it can handle jumps quite well thanks to the combination of PETG material and TPU material, so overall it only has scratches and nothing broken yet.
Hi, The buggy is finished, so I'm starting to work on the rally car (these things take some time, 2 and more months of designing, assembling, recalculating, finalizing, etc. it's not a fast process, but mostly a successful process :D)
... because it was not at full throttle and also only a 2s battery was used (not fully charged, my fault) and the smallest 17T pinion gear was used, I will definitely do a proper speed test with the GPS module with a 3s battery soon.
Really intriguing! If you can modify the same chassis to accept a commercial 1/10 rally car body it will also be a winner.
Thanks, Yes, that would be absolutely top, but because of the height of the shock towers, the body probably wouldn't fit there, anyway, now the plan is to make a rally car, so...:D
Can't wait to print it, already have NOMAD and it's amazing, love to see that it's based on NOMAD chassis style.
Also really glad that you switched to dogbone drive shafts instead of CV shafts
:D Yes, I wanted to use the same material as on the nomad, just make everything smaller.
Yes, if you drive this car to the edge, and I know that you will drive it to the limit, then Full Dogbones are the way :D
@@PatrikJKSthe idea with PETG and TPU is brilliant, stifness and toughness combined 🔥
@@Itsmeblvck Exactly 🔥😄
@@PatrikJKS I think NOMAD can benefit from the same design of arms :) even beefier design bows under stress.
@@serhatozkara3281
I wanted to avoid this style of arms for the nomad at all costs, but I'll probably end up doing something similar for the nomad soon. :)
To vyzerá super. Aj miesto dobre poznam.
Diki moc 😁, som tam musel ešte pred 7 ráno dobehnúť až mám prázdno tam 😅
Great work mate!! Love to see you doa crawler!!!!
Thank you very much mate, if everything goes well, the crawler should be ready by the end of this year :)
@@PatrikJKS Wow! I didn't even know you were making one 🙂
@@vhrte49
Well, I'm not working on it at the moment, because now I'm working on a rally car, but that should be done in 2 to 3 months, and then it's the crawler's turn. 🙂
Amazing as always. Congrats!!!
Thanks a lot man.
Nice ! 👍 I must learn this skill now .
Thanks so much! definitely :)
Great design en nice video edit also!
Thank you very much.
The video is not 100% as I wanted, but I did my best :) .
This is on my list. I'm still breaking in (or is it breaking up?) the Ares. I've already switched to PETG for some of it's parts!
Yup, PETG should handle it much better.
ты крут
Thanks
Design can be simplefied a lot by just oauzing the print and do a colour change. Also,i dont know your bed size but if its 25x25cm you can print the whole chassis as 1 part...
Yes, it is possible, but not everyone has the option of color change.
My largest printer is 40x40 cm, but for a one-piece chassis you would need at least 34 cm (33.77 cm to be exact) and currently a one-piece chassis is available in the file as an option.
@PatrikJKS every printer can pause a print and you can do the color change manually. You don't need an ams to do multicolor prints:)
34 cm yeah that's about 5 6 cm to long of a 25x25 bed diagonal:) I print 29 to 30cm long objects on my 25cm bed
Great project! What does it weigh?
Thanks.
Weighs 2.3 kg with 2s 5200 mah battery (hardcase).
Nice, can you also use normal commercial 1/10 buggy wheels?
Thank you, yes you can use a commercial wheels, there is also a link to the wheels in the folder.
@@PatrikJKS Nice! Thanks. How is the durability test so far on this model?
@@ripmax333
durability test very well, even if the fennec buggy is not a basher type, it can handle jumps quite well thanks to the combination of PETG material and TPU material, so overall it only has scratches and nothing broken yet.
I have a question about the screws. Do all the screws have to be fully threaded or not?
No, only M4*40 and M4*45 must have a full thread.
Would you have a nitro version of the car?
Unfortunately, there is no plan to make a nitro version.
Привет! Каким заполнением нужно печатать рычаги подвески?
I usually use almost 100% fill (98%, lines)
but keep in mind that it is TPU material.
Спасибо! А если я сделаю заполнение рычагов 30-50%, но деталь (которая прикручивается к рычагам) сделаю более толстой? Как думаете?
Hi, how's the progress with the RC rally car?
Hi, The buggy is finished, so I'm starting to work on the rally car (these things take some time, 2 and more months of designing, assembling, recalculating, finalizing, etc. it's not a fast process, but mostly a successful process :D)
not very fast
... because it was not at full throttle and also only a 2s battery was used (not fully charged, my fault) and the smallest 17T pinion gear was used, I will definitely do a proper speed test with the GPS module with a 3s battery soon.
Because itd shatter when crashed
@@ksmith1298
Well yes and that's another reason :)