Brass Hammer Kit from Penn State Industries // How-To (Ep.96)

Please Subscribe, it's FREE!
In this video I show how I made a Brass Hammer from Penn State Industries’ New Brass Hammer Kit (amzn.to/2GMwpYV) using an Olivewood turning blank. I first drilled a hole for the threaded rod and turned the blank round on the lathe. I used a roughing gouge, carbide scraper, and bowl gouge to shape the handle. After a round of sanding up to 600 grit I wiped on a few coats of Formby’s Tung Oil Finish, let it cure for a few days, and epoxied the handle into the brass head with the supplied threaded rod.
A very special thanks to Tim Holiner for supporting my work on Patreon.
Help me continue making quality content by becoming a Patron of the show and get early video releases and other rewards as little as $1: / seanrubino
***See a list of my tools here: spunjinworks.c...
Products I used in this project: (Affiliate Links)
Brass Hammer Kit - amzn.to/2GMwpYV
Jet lathe (comparable to mine) amzn.to/2HCiMLO
Turning tool amzn.to/2HLkZC9
Carbide scraper amzn.to/2JbwvpY
West System Epoxy with Fast Hardener - amzn.to/2EwTLPC
Milwaukee M12 3/8” Chuck Driver - amzn.to/2FZ5GbU
Rockler T-Track Table Top bit.ly/2BBtY5y
Other videos referenced in this video:
Finishing - • Apply an Oil Varnish /...
Work Station - • BEST DIY Assembly Tabl...
Follow me on Instagram / seanrubino
Check out The Dusty Life podcast thedustylife.com and get yourself a T-Shirt or Hoodie.
Get a SpunjinWorks T-shirt at spunjinworks.com/
Other Social Media:
Twitter / seanrubino
Soundtrack:
Show Me by Dj Quads / aka-dj-quads Music promoted by Audio Library • Video
In this video I show how I made a Brass Hammer from Penn State Industries’ New Brass Hammer Kit using an Olivewood turning blank. I first drilled a hole for the threaded rod and turned the blank round on the lathe. I used a roughing gouge, carbide scraper, and bowl gouge to shape the handle. After a round of sanding up to 600 grit I wiped on a few coats of Formby’s Tung Oil Finish, let it cure for a few days, and epoxied the handle into the brass head with the supplied threaded rod.