Great setup, can you talk about the clutch set up, any adjustments to make it easier to pull? Does the recluse help with that or have you changed the master cylinder to make it softer at all?
7:33 wow that stretch grip looks crazy when you can see both grips at the same time. Why do you like the stretch grip? Is it so you can move your hand back and forth to change where on the lever you're pulling (quick vs slower engagement)?
@@Whiti_G I looked into this more and didn't find an answer to my question but it's just a standard grip stretched to 140mm. Glue and safety wire holds it there after stretching it
Well you know Billy when I first started watching hard Enduro I thought you were a dork but now that I’ve been watching all your RUclips videos since you started it I think you’re pretty cool dude right on man keep up the good work always real 😎
Husky dealer from the States. Here to watch Billy impart some TPI knowledge. Always wondered about how soft you set up the suspenders. Might have to try that 12 CS myself.
I was able to see you train in the ametlla last Sunday, it was really impressive, I am starting hard enduro and you are a reference for me. good luck bro!
Ed was right this video was excellent. Quick question: with the lower foot pegs do you hit them more often or is that just my lack of skill causing that?
BB57, just listened podcast...very good and funny for first try... Got question if you can answer in next one: What 3things are most important when going to race my first British extreme event? I'm 42 vet rider, been away from bikes for years, just raced 6 Hare n hounds last year. Consider myself intermediate rider with good balance on bike, i ride Sherco 2stroke. cheers and keep them videos and podcasts comming! Ludovit
Such a stunning bike 🏁🤘🏻 have you ever bust/shattered a sun frame during hard enduro or do these composite frames take the punishment well ? Loving the vids as always 🏁🏁
Hi Billy. Question for ya "" What protection do you wear, harmour ect ect or lack of , arm pump with elbow pads ect. Trade off of hitting a bone , elbow pads cause arm pump then you more chance of making mistakes
For gearing, as 12:48 or 13:52 is the same Ratio, does it change something on power to the rear wheel? On my 300XC I run 13:51 almost every day in rocks and rocks hill, I praticaly never use 1st gear.
Well I was hoping you were gonna talk about what every post on every TPI group talks about....... do you add oil to the tank?😂 and take pictures of ya piston through the exhaust port 😂😂 On a serious note great video, good to see what you run on your hard enduro bike, and the people that don’t make videos have no idea the amount of hours that go into edits 🙈
Any reason you (and a lot of pros) don't use full wrap around hand guards like the powerparts ones ? I'd have thought they saved a lot of levers and knuckles
@@BillyBolt57 trying to find one for the FE350, the question i would love answered is what sprocket sizes would you recommend trying bear in mind its-the enduro gearbox and 6 speed not the motocross 5 speed.
What about the triple clamps? Standard or is there less offset? Since most bikes I have seen - if you take out the steering stops - you will hit the radiators and can pinch the wires.
@@HardEnduroLlewellyn I may be there if my finger is healed in time. It pretty much got exploded racing the Revlimiter in Texas. Maybe I'll see you there!
@billy bolt can you tell us a bit more about your suspensions, are your cone valve/xplor PRO taller than normal stock wp xplor? How much sag do you like to be on your bike? Front fork height on triple clamp? What suspensions setting do you use for faster races?
Awesome insight mate 🙏 love the puppy eyes and they will pull ya up hahah i wish the comment of look fast go fast was true hahah my husky looks fast hahah
Where may I order a factory oil cap like yours? My boyfriend recently bought his first husqvarna ever and I would like to surprise him with a cap like yours as he’s been obsessed with it… his Birthday is coming soon.
so what do you do to adapt to altitude , does anything above 2000 meters affect your concentration or stamina .do you find high altitudes effect your suspension or more so internal fluid levels
I've got a lot of time for this Billy Bolt guy! Down to earth and insanely talented! My 3 year old loves watching him riding 🤘
I must be a proper fan boy to be here this early
Wheeeyy ya little cutie
proper like the rabbit on Snatch?
Great setup, can you talk about the clutch set up, any adjustments to make it easier to pull? Does the recluse help with that or have you changed the master cylinder to make it softer at all?
Would have been here sooner but Ed dropped Tommy’s vid first. That is a seriously nice bike.
Favouritism
Amazing video Billy, please can you do more like it, and also more hard enduro video's.
Superb video Billy - top man 👏🏻
Just picked up a te300i rockstar! Thanks for this and all the amazing content champ! ⚡️BB 57⚡️
Billy, I like the way you are doing things, super talented and passionate guy with the feet on ground!
GO 57!!!!!
Here Billy!!!!! @13.23mins ! ya look a dead ringer for Basil Fawlty. Episode “The Germans”
Class mate! Ps am proper enjoying these vlogs lad 👍
The video I've been waiting for. I have now ordered the gearing parts I was on the fence about.
Pleased to be of service
Do you think its better to become confident on the standard suspension or will upgrading be worth it for an amateur rider?
Great content as usual!
Nice tips Bill Dog. I'll be using some of them as I crash a lot :) Nice vid man
Jarvis is here!!! Love your Channel too, I have the exact bike as you Midwest and I love it!!
7:33 wow that stretch grip looks crazy when you can see both grips at the same time. Why do you like the stretch grip? Is it so you can move your hand back and forth to change where on the lever you're pulling (quick vs slower engagement)?
Any idea of how to stretch grips dude?
@@Whiti_G I looked into this more and didn't find an answer to my question but it's just a standard grip stretched to 140mm. Glue and safety wire holds it there after stretching it
I'm glad you have stopped my never ending search for one of those posh oil caps gotta look fast to go fast
Bill and Ed have been pumping out some primo content. Cheers for the tips Bill 🤙🏽
Content kings
Well you know Billy when I first started watching hard Enduro I thought you were a dork but now that I’ve been watching all your RUclips videos since you started it I think you’re pretty cool dude right on man keep up the good work always real 😎
Why no full wrap hand guards for pro riders in hard enduro?
Husky dealer from the States. Here to watch Billy impart some TPI knowledge. Always wondered about how soft you set up the suspenders. Might have to try that 12 CS myself.
I do soundly declare, it is most outstandingly pleasant to participate in Motorsport!
Do you have softer clutch springs or something for a softer clutch pull? didnt mention that
Choice content Billy and Ed
🇧🇷 Congratulations Billy Bolt!!!
This is the motorcycle of my dreams!!!🇧🇷
Tommy’s upped the anti with his latest vlog Uncle Bill...
Loved the Video Billy Boy...& Ed
With out releasing too much of your secrets, what fork spring rate do u run? Great video, u have the personality for these vids
😀yeah baby! BB 57! The legend! 🙂
Waiting on your new merch so I can get myself some stuff!
Tear it up Billy! 🙂
Thanks man. It’s still a little while off yet but it’s coming.
Thanks man. We still abit off yet but it’s coming!
Great as always 🔥🔥🔥
Why you choose the Powerparts clamps on the SuperEnduro-bike and the Xtrig clamps on the extreme-bike?
Good eyes!😂 I never mentioned what kind of clamps they were on the extreme bike 🤐
@@BillyBolt57 😂yeah maybe you could tell why you choose them over here 💪👍
Great talk Billy, weather much better here in Australia 🤓👍
Great insight to bb57's hard enduro bike
I was able to see you train in the ametlla last Sunday, it was really impressive, I am starting hard enduro and you are a reference for me. good luck bro!
What bars are you running Billy? I find the stock bars a bit low for us proper sized people!
Did you ever find out which bars he runs?
Ready for the next podcast!!
Well worth the wait. Great to have a butchers at a factory bike!
Usually its the woman nicking the blokes hoodies. Good to see Bill likes to switch the roles every now and again. Good vlog fella.
😂😂
Nice bike,crasy pilot! ✊🏼✊🏼✊🏼✊🏼💪💪💪💪
You had me worried that you weren't going to give SXS a shoutout!! The best plates available!!
Ed was right this video was excellent.
Quick question: with the lower foot pegs do you hit them more often or is that just my lack of skill causing that?
Your lack of skill I think brother
Extra soft or maybe 120 mousse :-)
Nice video, always great to see pro bikes explained, thaks a lot
Great insight to the spec you pros run on your bikes 👍
BB57, just listened podcast...very good and funny for first try...
Got question if you can answer in next one:
What 3things are most important when going to race my first British extreme event? I'm 42 vet rider, been away from bikes for years, just raced 6 Hare n hounds last year. Consider myself intermediate rider with good balance on bike, i ride Sherco 2stroke.
cheers and keep them videos and podcasts comming!
Ludovit
Such a stunning bike 🏁🤘🏻 have you ever bust/shattered a sun frame during hard enduro or do these composite frames take the punishment well ? Loving the vids as always 🏁🏁
Top man Billy. Good video as always.
Thank You BRADDA Billy . 🤙🏾🤙🏾🤙🏾💯
You should call this video: "How to set up your bike for HARD ENDURO", it will skyrocket with the YT algorithm!
More fans = more Billy's vlog = more 💸
How does the minge get the front brake lever cables hidden? It’s so clean up there 👆🏻
Looks sweet billy.& well but together by yourself Ed 👍
Tips for lightest clutch pull? I have a hand injury and need to find any advantage I can. Thank you!!!!
Awesome video thanks. Did you guys install a Capacitor so that you can still kick start the bike if the battery dies? Cheers
Nice Billy boy excellent performance in racing motor enduro. 💪💪💪
This is solid content bro! Subscribed!
💪🏼💪🏼
Hi Billy.
Question for ya ""
What protection do you wear, harmour ect ect or lack of , arm pump with elbow pads ect. Trade off of hitting a bone , elbow pads cause arm pump then you more chance of making mistakes
For gearing, as 12:48 or 13:52 is the same Ratio, does it change something on power to the rear wheel?
On my 300XC I run 13:51 almost every day in rocks and rocks hill, I praticaly never use 1st gear.
Always fun to watch man keep it up "great" : )
lol, look fast, go fast... love it Dudes... Take care lads.
Great to see the tech.
Adam 57 Billy Bolt 🎉 wor enduro video 🤘🏿✊🏿🤙🏿💪
Go On ,go on , go on .
😂 training hard ?
In South Africa looked like you was having a fantastic time adventure riding with the boys 💨💨
my favorite rider 57
How about some details about that new TPI system you are testing?
Was hoping for a hard enduro set up and here it is. Top man.
What’s your thoughts on metal wrap around hand guards?
hi Billy. What motorcycle handlebar did you put on? Which model is it !? thank you
Great looking bike.
So, the expansion chamber - FMF Gnarly or what?
No protection on the TPI valve? Seems very exposed.
Great stuff - keep it coming! 🤘🏻
Thanks billy.
Some clutch talk be great 👍🏻
Love it! Now got to convince the missus....
Well I was hoping you were gonna talk about what every post on every TPI group talks about....... do you add oil to the tank?😂 and take pictures of ya piston through the exhaust port 😂😂
On a serious note great video, good to see what you run on your hard enduro bike, and the people that don’t make videos have no idea the amount of hours that go into edits 🙈
😂😂😂 so true on both statements man!!
What about radiator hose guard/plastic fuel tap-swaped for alloy one??? TPS sensor guard??? do u use it....
Bill, handlebar bend?
Any reason you (and a lot of pros) don't use full wrap around hand guards like the powerparts ones ?
I'd have thought they saved a lot of levers and knuckles
Tell us more about your clutch!!!
On the kick-start the pit bike i was riding when I crashed it I snapped starter button and luckily it had a kick-start 😂
Would be great to know your setup on the FE350 when used, possibly some recommendations on both TE and FE for trail riders and hare and hounds racers.
There’s a video
@@BillyBolt57 trying to find one for the FE350, the question i would love answered is what sprocket sizes would you recommend trying bear in mind its-the enduro gearbox and 6 speed not the motocross 5 speed.
Thanks for sharing man!
I want details on the clutch master. Is it stock master or????? Looks like super easy clutch pull.
Been waiting for this one... just like a lil BB57 Mustache T swag! You going to have a kid version, too?
Billy crazyy No1
"I would tell you what's in there but I don't know" LOL
What about the triple clamps? Standard or is there less offset? Since most bikes I have seen - if you take out the steering stops - you will hit the radiators and can pinch the wires.
You running the factory yellow power valve spring?
Give my little lad a shout out..billy boy ....Jamie o' reilly
What size clutch master cylinder do you run ? Thanks for the info and tips much appreciated 👍
Was going to ask when the podcast was out. Some nice listening for work tomorrow 👍.
Do you run a standard air filter?
Twinair
Yes twin air
Hi Bill have you tried running a steering damper? Potential is there to go even softer with suspension without headshake of doom.
Thanks for all that deale 👌👍
Can I ask you how you get that soft clutch,I saw when u grab it and its super soft?!
,,,its disconnected, he’s runnin an auto 😂
Whattt?🤦♂️
I ride with midwest mountain engineering Clutch lever on my tpi 2020 in hard enduro !
50% softer than stock lever
Apreciate that boys!!!!!
Dude, perfect timing! My first AMA hard enduro is in 2weeks. I'm friggin nervous
Pin it
Same, but doing RORR in PA in July.
@@HardEnduroLlewellyn I may be there if my finger is healed in time. It pretty much got exploded racing the Revlimiter in Texas. Maybe I'll see you there!
@billy bolt can you tell us a bit more about your suspensions, are your cone valve/xplor PRO taller than normal stock wp xplor? How much sag do you like to be on your bike? Front fork height on triple clamp? What suspensions setting do you use for faster races?
To greedy
Awesome insight mate 🙏
love the puppy eyes and they will pull ya up hahah
i wish the comment of look fast go fast was true hahah
my husky looks fast hahah
hey mate,where do u put the light switch . i mean wheres all the switch tht usually on the handle . tq
Awesome vid!
Where may I order a factory oil cap like yours? My boyfriend recently bought his first husqvarna ever and I would like to surprise him with a cap like yours as he’s been obsessed with it… his Birthday is coming soon.
so what do you do to adapt to altitude , does anything above 2000 meters affect your concentration or stamina .do you find high altitudes effect your suspension or more so internal fluid levels
Billy - mega at the valleys yesterday. Do you feather the clutch when on rocky climbs? Or any climb? Or just leave the clutch alone?
thanks billy
How should be the front mousse? Hard or soft?
What kind of chain block and swingarm tab protector?