great 👍 work I swap out my seats today in my 1998 jeep zj 5.9 limited the seats I got the guy cut up the seat track so I had swap the track as well bit of a pain it's easy just time consuming lol
Great video! Having the bare floor exposed would be a great time to add sound deadening mats! Makes a massive difference with road noise, along with doing the inside of the doors too.
Hey Jon looks great...yea some LKQ sites are run by people who don't give a shit about how they sell stuff... it's a pay check to them no pride non professional,talk to you like you don't know what you are talking about and act like you are bothering them...the one in my area I worked at before it was owed by them...I have dismantled top of the line cars... Porsche, Ferrari, Lamborghini, Mercedes Benz, BMW, vipers ECT....I called for a part and went to pick it up and allowed the sales guy to talk down to me for a few minutes then let him have it and asked for his manager...just so happens I trained this manager on everything salvage yard when he worked there on co op from trade school...... needless to say that salesman don't work there anymore..but unfortunately that's the way it's going till people start holding them accountable....now the TRX has paddle shifters so if you put a hellcat steering wheel in it I am wondering what it would take to make them work 🤔...I know there is a salvage yard on eBay that was selling parts from a TRX wonder if you could buy the harnesses if they still have the truck and have the right plugs and features ya know like cooling fans or swap out a challenger harness instead of a charger????
what is the part number of the wiring harness you had to buy for the center console from the dash to the center console, the one you said was to long and had to tie it up ??? Part # please
You didn't show how to get the center arm rest out. I want to get to the wiring that runs under it to the cigar lighter in the back seat. There are four screws at the top, 2 on each side, but it still doesn't move.
I have done this mod 4 times , all on 2500’s also installing a center console shifter on the 2500’s is a nice addition! Not sure why Ram never did it from the factory !
@@davidabstance6482 you will need a shifter wiring harness if your removing the shifter from the column also the cover on the steering column . Most of the time you will need an a/c duct extension that connect the vents in the console . Also the bezel around the radio on the dash all needs to be changed as well .
There is already a wiring harness under the carpet that plugs into the console to supply 12v power . You will also have to cut the carpet out under the console .
I'm doing this to my 2018 Power Wagon. Still sourcing the console, but what media hub is in your console? Is it a USB/SD Card/12V cigarette lighter? Or is it a USB/12V cigarette lighter? I'm trying to figure out if it matters for Android Auto to work on the radio
What are those charger/challenger seats? I want that. I wonder if you can put a challenger steering wheel on with no airbag lights on dash that would be bad ass.
I installed the center console in my 2012 2500 tradesman and the plug under the driver seat I plugged in but the plug for the usb and the other one next to it I don’t see any plug for it in the radio area. Anyone know how I can power the usb cable
I have a 2012 2500 with the 4x4 shifter on the floor has anyone done this swap I want to do it aside from it looking good it actually gives me more space than what I have now
Wow what a huge difference in the interior and the outside of the truck cant wait for the hellcat components in the bay 😏👌🏽 and I think you sould throw those gold rims on there 😉 #BSTEDMTRSPRTS
John, As a long while subscriber and supporter I would be grateful for the opportunity to buy the rams old seats and console if you decide to sell. I’d want them for my personal rig.
imagine all the neons, civics, eclipses, lancers, subarus etc that could have been saved from getting trashed if content like this existed back in the day
It's a option for taking out the seats. If you can't give your favorite creator a few bucks then you obviously don't appreciate him nor can you afford a vehicle and extras. This video was Free and I hit the Thanks and donated 2 bucks just to show appreciation for all the hard work John puts in for us!
Thanks Shane! Makes me laugh when clowns want to get mad that they don’t get everything for free. Most RUclips channels drop their car off and pick it up fully built and show nothing yet I have 100s of free how to videos. If you can afford hellcat seats you can afford the $5 even if you only sign up for one month to watch the video 😂🤦♂️
This conversion should be the opposite. Center consoles are pointless cinder blocks between you and your girlfriend. There's this thing called a column shifter and the jump seat folds down into cup holders.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Support BoostedMotorsports by JOINING Today! ruclips.net/channel/UC3B_Q1mNw1iuS8KkAZi_fUAjoin
Should I rejoin? Haha
Join you fuckin heathens! Support yo boy!
I can’t even express how good that interior is looking… 👀
Wish I could upvote you twice - I know more about Dakotas and Rams than I do about the vehicles I actually own thanks to you.
Thank you I appreciate it!! 💪
Love how the truck is coming along.
Appreciate your hard work into the channel 👊
Thanks brother 💪
i love this series can’t wait to see it fully done
So far the interior is a night and day difference ! Probably even feels more comfortable. Amazing job to date.
It's really coming together nicely.
It’s coming out beautifully!!!
The interior is looking awesome it came out fantastic!!! Keep up the great work on the HELLRAM!!!!!! See you in the next video!!!!
I love it bro! That truck is looking great! Good for you, awesome! Take care!
Interior looks killer.
You should build a sub box to fit behind the center console, then some storage solutions behind each seat. It's the perfect size man
Ram should get you to design a truck to your liking that would be sweet
Wow looks really awsome well done john 💯👍
great 👍 work I swap out my seats today in my 1998 jeep zj 5.9 limited the seats I got the guy cut up the seat track so I had swap the track as well bit of a pain it's easy just time consuming lol
Would love to see if you could upgrade to a wheel with the paddle shifters. That would be sick af!
How's Aaron doing on the Hellkota?? Haven't seen any updates.
Great video! Having the bare floor exposed would be a great time to add sound deadening mats! Makes a massive difference with road noise, along with doing the inside of the doors too.
Also putting the dirty parts in the dishwasher (non electrical parts) works like a dream to clean it like new !!!
could you make a video of how you got the seats in there
Hey Jon looks great...yea some LKQ sites are run by people who don't give a shit about how they sell stuff... it's a pay check to them no pride non professional,talk to you like you don't know what you are talking about and act like you are bothering them...the one in my area I worked at before it was owed by them...I have dismantled top of the line cars... Porsche, Ferrari, Lamborghini, Mercedes Benz, BMW, vipers ECT....I called for a part and went to pick it up and allowed the sales guy to talk down to me for a few minutes then let him have it and asked for his manager...just so happens I trained this manager on everything salvage yard when he worked there on co op from trade school...... needless to say that salesman don't work there anymore..but unfortunately that's the way it's going till people start holding them accountable....now the TRX has paddle shifters so if you put a hellcat steering wheel in it I am wondering what it would take to make them work 🤔...I know there is a salvage yard on eBay that was selling parts from a TRX wonder if you could buy the harnesses if they still have the truck and have the right plugs and features ya know like cooling fans or swap out a challenger harness instead of a charger????
BRUH!!!! It looks so good!!!
Bad azz brother.
#BOOSTEDMOTORSPORTS FTW
🤔🚫🧢🚙💨
Thanks man she’s finally worthy of a hellcat engine 😂
Man I wish I could do the things you do! So bad ass!
what is the part number of the wiring harness you had to buy for the center console from the dash to the center console, the one you said was to long and had to tie it up ??? Part # please
Love the build, I got a 4 gen single cab going do some of this mods👍
I can't seem to find the wire harness for the USB media, do you have that particular part # or how to find it...
Awesome video!!
One question has anyone put this uconnect center console on a 2010 Dodge Ram?
You didn't show how to get the center arm rest out. I want to get to the wiring that runs under it to the cigar lighter in the back seat. There are four screws at the top, 2 on each side, but it still doesn't move.
rear sliding window? next ? 🤔
I have a 2012 I got a 2014 center console and buckets, radio bezel and all. Will everything plug up electrically. I ordered the 2 brackets.
I have done this mod 4 times , all on 2500’s also installing a center console shifter on the 2500’s is a nice addition! Not sure why Ram never did it from the factory !
When your swapping to a center console do you need any addition wires or do all the wires go into place like normal?
@@davidabstance6482 you will need a shifter wiring harness if your removing the shifter from the column also the cover on the steering column . Most of the time you will need an a/c duct extension that connect the vents in the console . Also the bezel around the radio on the dash all needs to be changed as well .
There is already a wiring harness under the carpet that plugs into the console to supply 12v power . You will also have to cut the carpet out under the console .
How did you convert center stick shifter to dial shifter? Mine is 09 laramie 1500
Im looking to go from center console to jump seat. Any suggestions there?
Hey did your upper console came with the mat covers? Can you share the part number for those rubber mats?
I'm doing this to my 2018 Power Wagon. Still sourcing the console, but what media hub is in your console? Is it a USB/SD Card/12V cigarette lighter? Or is it a USB/12V cigarette lighter? I'm trying to figure out if it matters for Android Auto to work on the radio
What are those charger/challenger seats? I want that. I wonder if you can put a challenger steering wheel on with no airbag lights on dash that would be bad ass.
What hardware/harness would I Ned to get the 120 plug on the bezel to work? Thanks!
Know this is a older video would really like a response as I’m wanting to do this in my 2014 ram 1500 tradesman quad cab is it still the same install?
I need that top compartment Matt. Any idea where to find one?
Time for some black headliner, pillars, and visors. I believe you can get them from a 2500 that will direct fit
Do the A/C controls work from the new bezel or do you HAVE to swap it out from the old one?
Looking 👍 good
Do you have to upgrade your harness to use the center console? Or it’s just plug in play?
I installed the center console in my 2012 2500 tradesman and the plug under the driver seat I plugged in but the plug for the usb and the other one next to it I don’t see any plug for it in the radio area. Anyone know how I can power the usb cable
Great video. Awesome truck. Question, where did you find the radio bezel?
Any chance you know the interchange on a 6.4 ram? I want to swap out my 2014 6.4 which I spun bearing on to a 2022
Was this done to a 2009? Trying to do the same thing!
do you know if that radio bezel and the radio can fit on a ram 2009
Hi so I can convert my 2009 crew cab with this center console even tho I have the uconnect stereo?
What year? I'm about to do my 2012 but don't know the exact year of the center console.
Very good presentation thank you for showing us brother
looks awesome
Where did you get the center console
I wanna know how you got those hellcat seats in there
Love the truck Doing one myself. where did you find carpet to fit?
Nice job! Man, I miss my center console shift in my 11 Ram.
Those shifter knobs are trash in the newer models.
anyone have a list of the part numbers that are needed to do the conversion?
Good job on the video very informative..
I have stock center console I wish I could switch to the fold down middle seat
If you are local to tampa area I still have all the fold down seat and dash parts if you want to work something out for them
Beyond excited for this build! How did I become a paid supporter of the channel?
Bro can you tell me all the screws needed
What year truck was this? Do you know if 2014 Laramie long horn with center console will accept a jump seat out of 2020 Laramie long horn ?
Is it a 2020 classic?
Did you get your radio bezel from LKQ also? I cant find the search option on their website
I have 2 for sale email BoostedMotorsports88@gmail.com
So did he ever show how he got those hellcat seats in there?
How can I be a member I want to watch the video of the bracket
Excellent video!!!
Thanks Gary!!
I have a 2012 2500 with the 4x4 shifter on the floor has anyone done this swap I want to do it aside from it looking good it actually gives me more space than what I have now
Will the SRT steering wheel from a Charger/Challenger work in it? After all it is going to be an SRT.😁
You got some money bro😵💫
2011 want a tesla style stero control heat and air help
Wow what a huge difference in the interior and the outside of the truck cant wait for the hellcat components in the bay 😏👌🏽 and I think you sould throw those gold rims on there 😉 #BSTEDMTRSPRTS
Thanks will! Yeah I’m definitely going to try out the bronze hellcat wheels soon 😁
Thank you
Very Nice!
Great channel,
I am
Interested on buying you dash bezel w the jump seat . If you want to sell it
John,
As a long while subscriber and supporter I would be grateful for the opportunity to buy the rams old seats and console if you decide to sell. I’d want them for my personal rig.
I have a heated leather wrapped steering wheel if you’re interested.
Lol. I made the comment about this on an earlier video... Seems we're on the same page.
Looks like I've got a lot of work, especially seeing that I can't find any of these in a wreckers.
Out of curiosity I looked but didn’t see how to be a paid member .
Top pinned comment brother 💪
Support BoostedMotorsports by JOINING Today! ruclips.net/channel/UC3B_Q1mNw1iuS8KkAZi_fUAjoin
Ah yeah link doesn’t take you anywhere but to your main page to you tube with no link to a paid membership
Try from a computer or from your browser. Just double checked it and works for me 🤷♂️
that bezel is dirty as hell
If anybody needs a complete console kit, I have it. I did the exact opposite of this. 👍🏼
imagine all the neons, civics, eclipses, lancers, subarus etc that could have been saved from getting trashed if content like this existed back in the day
💪💪💪
This is where I leave this channel. I paying for RUclips plus for a reason. Good luck on you build
Ok smart guy you do realize I don’t get a penny from your RUclips plus right? See ya later loser!
It's a option for taking out the seats. If you can't give your favorite creator a few bucks then you obviously don't appreciate him nor can you afford a vehicle and extras. This video was Free and I hit the Thanks and donated 2 bucks just to show appreciation for all the hard work John puts in for us!
If you think otherwise I'll be back in New york in December when I get done I'm poland
@@shane401, far from my favorite. It keep me busy when I'm in poland
Thanks Shane! Makes me laugh when clowns want to get mad that they don’t get everything for free. Most RUclips channels drop their car off and pick it up fully built and show nothing yet I have 100s of free how to videos. If you can afford hellcat seats you can afford the $5 even if you only sign up for one month to watch the video 😂🤦♂️
This conversion should be the opposite. Center consoles are pointless cinder blocks between you and your girlfriend. There's this thing called a column shifter and the jump seat folds down into cup holders.
What is that module under all that? Can it be relocated?
Where did the seats come from?