Make an imprecise, ineffective hinge out of plastic pipe, that probably takes about 2 hours to make.... Or buy a properly manufactured metal one from home bargains for about 2 quid. Hmmm..... Tough choice.
I think it's a psy-op test by the government to see how mindless the public is. If the first one is any indication of the rest of the video, I'll just end it right there
you can just buy stuff from the hardware store that does all of this for far cheaper, more accurate, and less time consuming than all of this video, what a waste of time.
Когда был Саня маленький С кудрявой головой Он бегал в ссаных валенках За водкой ледяной. Потом за самогонкою, Потом за анашой, За коксом, за соломкою И прочей наркотой. Под действием помянутых Видосики пилял И много много радостей Подписчикам давал.
@@cmack3625 like half of these videos they call brilliant and genius hacks but like.. half of them are a 5 min trip to a hardware store. I could understand if the hacks solved an existing problem but.. they don't
I highly urge anyone out there thinking about trying the drill hit cleaning hack, DON'T!! First of all, the drill bit used in this video will do the sane job and perform exactly the same way clean or dirty. Secondly, if you don't know what that wheel he cut into pieces and placed in the jar. It's a grinding wheel used in hand grinders. It's carcinogenic and not something you want to mess around with let alone cut up into small pieces and get fibers in the air you breathe. And finally, you can go and just buy a new one for pennies at any hardware store, fucking pennies
"Ударная отвёртка" под один конкретный размер🤦♂️ Саня, ты же раньше уже делал более-менее рабочую ударную отвёртку. У неё должен быть тяжёлый корпус, а ось лёгкая.
The video isn't really clear on this point: if you make the "glow-stick" style soft light accessory for your iPhone, be sure to super-glue the steel nut to the back of the phone, taking care to align the LED with the center point of the nut's threaded hole.
The orange pipe is pvc or cpvc. Easy to cut and malleable at relatively low temperatures. The powder is baking soda. It will instantly harden super glue.
Can someone explain the soldering iron one with the lightbulb filament? Obviously they hit it with a solder sucker or solder wick during the jump cut but u still don't understand what it does or how.
Lot of wasted material and energy cleaning the screw drive tip. Just use a Dremel tool with a cleaning wheel and be done with it in a matter of minutes.Or take some Muriatic acid and dilute it with water and let soak for about an hour. Easy Peasy
At the start of the video I thought "oh my god what an idiot" but when I got to the part with the drill and nut I thought "well I guess that's a kind of convenient way to make a drill stop". Then he turned it upside down and beated it with a hammer.
Extensive fixes for problems that don't exist
😂😂this got me more angry 🤬
Make an imprecise, ineffective hinge out of plastic pipe, that probably takes about 2 hours to make.... Or buy a properly manufactured metal one from home bargains for about 2 quid. Hmmm..... Tough choice.
I love the part where he destroys a drill bit to make an allen wrench that he could have purchased for 10 pence.
@@joelr877😂😂😂 which would literally come as part of any 5 quid multi tool kit
I think it's a psy-op test by the government to see how mindless the public is. If the first one is any indication of the rest of the video, I'll just end it right there
This video needs to change the title to "Stupid ideas no handyman would do".
This video proves some people have way to much time and not enough going on upstairs.
Who has this much time on their hands to be this stupid? 😅
That hinge is the most useless thing I've ever seen. It looks like it will last about an hour before it breaks
Seems we are lowering the standards in what can be considered Brilliant.
Correct
@@mcmerry2846¹1111❤
For the love of God, never repair broken safety glasses! Throw them away and get a new pair!
I have to admit, he has a great RUclips strategy, make stuff so incredibly idiotic that I watch just to see what lunacy will happen next
If your light bulb breaks, then smash it with a hammer and then rebuild it out of noodles and super glue.
you can just buy stuff from the hardware store that does all of this for far cheaper, more accurate, and less time consuming than all of this video, what a waste of time.
Когда был Саня маленький
С кудрявой головой
Он бегал в ссаных валенках
За водкой ледяной.
Потом за самогонкою,
Потом за анашой,
За коксом, за соломкою
И прочей наркотой.
Под действием помянутых
Видосики пилял
И много много радостей
Подписчикам давал.
@@МистерХьюМоржоуиПривет, Сыч! С возвращением из рейса!
How come you never see them using the gadgets they have made in the past to make these other gadgets ?
A hinge costs maybe a dollar or so....
I quit the video after he took round plastic, made it flat instead of starting with flat plastic or pvc.
@@cmack3625 like half of these videos they call brilliant and genius hacks but like.. half of them are a 5 min trip to a hardware store. I could understand if the hacks solved an existing problem but.. they don't
I liked it when he cut up a perfectly good angle grinding disc to clean a rusty bit that probably still worked fine, rust and all. 😂
@@Polyphemus. I've got rusty bits that have been that way for going on 25 years and still work. 😂
If this is brilliant then my professional repairs must be nobel prize worthy
He broke a lamp to make a lamp.....
Does this guy live 3 days from a hardware store or something
4:00 seriously man, are you ok?
Each and every clip here is useless.
I highly urge anyone out there thinking about trying the drill hit cleaning hack, DON'T!!
First of all, the drill bit used in this video will do the sane job and perform exactly the same way clean or dirty.
Secondly, if you don't know what that wheel he cut into pieces and placed in the jar. It's a grinding wheel used in hand grinders. It's carcinogenic and not something you want to mess around with let alone cut up into small pieces and get fibers in the air you breathe.
And finally, you can go and just buy a new one for pennies at any hardware store, fucking pennies
Dude pulled a reversed eureka on that one
That's my fav comment. This whole video is a reverse eureka.
That would’ve been a total waste of five minutes. Good thing I stopped at two.
What is meant to be happening with a bit of old lightbulb and a printed circuit board? I saw nothing useful at all
Чё то сегодня приход слабый....😂😂😂
@@МистерХьюМоржоуиСычу респект!!!
Стеклянный паяльник 🤦 . Ждем электросварку дерева.
I was wondering what in the hell they was doing with the innards of that light bulb. Lol 😂 This person is out there... 😂😂😂
If only there were prefabricated items with a pin that you can attach to two boards or items that make them fold together 😂
Как же санькинв шары рады, что он не кот, как же рады... 😊
Пластиковый навес? Серьëзно? Ещё и надфиль испортил? Ну это просто гениально!
Это тянет на 560 Полуляхов.
Brilliant mind of invention? You made a crap hinge that you could have bought at a hardware store for better quality.
"Ударная отвёртка" под один конкретный размер🤦♂️ Саня, ты же раньше уже делал более-менее рабочую ударную отвёртку. У неё должен быть тяжёлый корпус, а ось лёгкая.
Nice 👍
Who in the actual hell has this kind of time on their hands??
Weldon sir
That's why there are factories dedicated to making hinges, don't go using pvc pipes or chains people.
Who did you use to put the eye protection back together?
It is super glue, cyanoacrylate specifically. Can be cured instantly with baking soda. Just don't ever try and repair safety glasses.
This is for people that are really poor and have too much time on their hands.
I stayed and watched just to add comments on how inefficient 98% of these are
The impact screwdriver was pretty fucking clever I'll give you that
Like!
The video isn't really clear on this point: if you make the "glow-stick" style soft light accessory for your iPhone, be sure to super-glue the steel nut to the back of the phone, taking care to align the LED with the center point of the nut's threaded hole.
First 😊
great bro, good luck always
So nice sir
What a load of unessesary effort. Just go to a hardware store.
So what are we exactly doing between 1.52/1.57 !?
Разбил на столе ртутную лампу, сделал стеклянный паяльник. Правильно, так и надо!
If she can't find you handsome she should atleast find you handy
I'm pullin for ya; we're all in this together
What exactly is the orange tubing in the first "fix"? And what's the powder you pour on the glue for the goggles, and what's the purpose of doing so?
The orange pipe is pvc or cpvc. Easy to cut and malleable at relatively low temperatures. The powder is baking soda. It will instantly harden super glue.
The music tho! Hardcore afrobeats ✌🏼❤️
I've seen a lot of brilliant backs, none in this video.
The video was hilarious
It started out interesting The hinge was cool but by the time I saw him swap the Phillips head a screwdriver bit after tumbling it I said I'm done.
The music track was the nicest part of this video
I agree... Very 'clever' with the hinge, but why oh why would you go to the trouble when a hinges cost sod all? Purely for views on youtube?
Can someone explain the soldering iron one with the lightbulb filament? Obviously they hit it with a solder sucker or solder wick during the jump cut but u still don't understand what it does or how.
Доктор Дью уже едет)
Why in the eff would you go to all that trouble to make a $1.99 hinge you can buy in any hardware store?
I duct taped the sole back on my shoe once, guess I'm brilliant?
That plastic door hinge looks strong 🤣🙄
Brilliant surely isn't what it used to be..
Who let 5-Minute-Crafts into the machine shop.
Lot of wasted material and energy cleaning the screw drive tip.
Just use a Dremel tool with a cleaning wheel and be done with it in a matter of minutes.Or take some Muriatic acid and dilute it with water and let soak for about an hour. Easy Peasy
Чем вы склеили очки и чем потом посыпали?
Суперклей и сода
Сюдя по контенту этого видео, коксом. Что в принципе он и продемонстрировал
Когда коту делать не хрен, он яйца полирует.
Anyone else think the thumbnail looked like a weird sandwich?
No glue exists to glue back together plastics, like he did with the glasses in this video. I’ve tried every product on earth and nothing works.
He calls it The Opti-grab!
👍👍👍
They have hardware stores where you can buy tool that actually work
4:15 поясните, че это, а то я ума не приложу зачем это ему.
There's notging brilliant about spending 2 hours making a 3 dollar hinge.... which any "handyman" worth his salt has is a mason jar somewhere.
I'd spend a day making a hinge OR go buy a real one for $2 ; that'd be handy.....
I might just try the glass in a soldering iron. The rest is just silly.
Cool if you have all those nice tools to work with. But I am blown away by the creativity.
There’s a bit off my life I can’t get back , I’d do anything to go back to unsee that
Ahh brilliant. I saved myself 50p
Warrants, parole violations. Rather not be seen
At the start of the video I thought "oh my god what an idiot" but when I got to the part with the drill and nut I thought "well I guess that's a kind of convenient way to make a drill stop".
Then he turned it upside down and beated it with a hammer.
Wtf is happening at 1:17
MM77 Approved 👍🏼👍🏼
I need my 5 mins back
Pemikiran ide yang sangat cemerlang 👍👍👍
SAẞ
VSCCC
I thought he was just building one sick ass thing! Not just weird tech Savvy little bits.😅
I would never use any of these.
LIKE SUNY ?! 👍🏻
Who knows, someday we might find ourselves applying these tips in our own lives
These are al sloppy, crappy hacks. A few of them are pretty unsafe too.
very useful way bro
Ridiculous.
I thought we were leading to a conclusion... but, no
Don't know what this is
This video is why the dislike button is still around.
Intriguing
I came to RUclips to cool down. It didn't work.
rofl 😂
Still waiting for something brilliant. So far they are just making stuff that already exists but worse.
I went to SUNY and got a degree.
Why?
Вы там чё нахрен на приколе?
Чего он курит я не знаю!!!
Sorry the first word that comes to mind is “pointless!”
❤❤
great bro, good luck always
@@BARISANPEJUANG
Thank you
After about 3 I realized this video was about wasting an hour to save a buck and a half. Be better than this lol
Well,there's two and a half minutes of my life wasted. Luckily I didn't watch the whole thing....