How stable are these helicopters and when buying it comes everything included, whether the battery is the one you choose to control everything electronic or you have to buy it separately and you can tell me where I can buy it and how much it is worth --- new sub
I am going to install H1 on my 600 class Hughes 500 scale heli. As you may know, the fuselage have strong magnets along the joining edges. I am concerned the effects of those magnets on the calibration. Should I remove those magnets to avoid the calibration interference?
I have brought the H1 but looking for info I want to connect my 6-s to the motor and use a separate battery for the receiver and servos can I connect the battery monitor wire direct to the 6-s or via another Regulator you may wonder why I want to go this route I am flying a scale helicopter and with everting running through 1 battery it does not last very long with all the lights etc another reason I’ve had bad experiences with ESC BEC going faulty and frying all my electronics 3 x £100 servos, gyro, retracts etc can add up to a lot of money it may be rare but I don’t like throwing money away.
👀 Wow ! From certain angles ,
i realy thought it was a real scene !!
Won-der-ful ! 👏👏👏👏 👍
Thít quá...mê nhưng ko có điều kiện
Hi,
Beautiful and stable Heli. What electronics are you using on this one?
I'd pay you to set up a copter like this ...Amazing .Think I need to get the, H1 auto pilot and attach it to a large copter wow
Máy đẹp quá
How stable are these helicopters and when buying it comes everything included, whether the battery is the one you choose to control everything electronic or you have to buy it separately and you can tell me where I can buy it and how much it is worth --- new sub
I am going to install H1 on my 600 class Hughes 500 scale heli. As you may know, the fuselage have strong magnets along the joining edges. I am concerned the effects of those magnets on the calibration. Should I remove those magnets to avoid the calibration interference?
sr i can't speak english
@@NamPack Tôi có thể mua mô hình rc này ở đâu? Bạn đang xây dựng cái này?
Hi,
Would tell me where I can purchase the same helicopter or similar?
Rgards
Paul
I have brought the H1 but looking for info I want to connect my 6-s to the motor and use a separate battery for the receiver and servos can I connect the battery monitor wire direct to the 6-s or via another Regulator you may wonder why I want to go this route I am flying a scale helicopter and with everting running through 1 battery it does not last very long with all the lights etc another reason I’ve had bad experiences with ESC BEC going faulty and frying all my electronics 3 x £100 servos, gyro, retracts etc can add up to a lot of money it may be rare but I don’t like throwing money away.
sr i can't speak english
có H1 ......thấy con máy bay, bay không mượt vậy bác....❓
@Nam Pack Tôi có thể mua mô hình rc này ở đâu? Bạn đang xây dựng cái này?
tôi oder từ trung quốc taobao
cool~~~
Xin chào. Tên thương hiệu của thân máy bay là gì? Căn chỉnh, Roban, Aerodyne?
i don't know it not me
Top
Battery 5200-6s x2???
no! it 2200-6s x2
Đâu ra hay vậy
Donde se puede comprar?
Con này bác mua bao nhiêu bác
cụ chủ đầu tư vào đây khoảng 60 cụ r bác nhé
Mua đâu vậy bạn
ship nước ngoài nhé giá khoảng 40tr
Eiserne Kreuze auf einem Amy Hubschrauber. Lächerlich.
anh ơi con này mua ở đâu nhỉ
đặt ship từ nc ngoài về
hết bao nhiêu vậy a
tầm cỡ 12 t đô xuống đúng ko a
@@hautam4201 khoảng 40tr cả điều khiển
Nói đến 40 là là thấy ớn quá 5 nghìn mua bánh mì còn 0
Con này mấy chục củ đấy a 😂
tầm 3 xịch nhé
Con này giá mấy triệu vậy giới thiệu cho anh em cùng mua
Con bày tầm trên 20trieu nhé
Mua đâu chỉ mimhf vơia
@@nbchannel8825 scale rc heli nhé
@@nbchannel8825 mua bên nước ngoài