Это называется "Параллельные тиски", в просторечии "Станочные". Созданы в начале технического развития человечества, металлическую версию этих тисков можно найти в продаже. Делать такие вещи из деревяшки вряд ли имеет смысл, лёгкие, неточные, неустойчивые, непрочные, а мороки на изготовление много. Инопланетяне не поставили ещё, хотя бы одну, стальную направляющую чуть ниже затяжного винта, как это делается на обычных тисках, болтанки было бы меньше.
Excellent device & well-recorded. And thank you SO MUCH for not contaminating your video with a distracting, irritating & totally unnecessary music bed!
A wooden vice like this is a wonderful thing. I particularly like this version because of its versatility. An idea: If you insert 2 drive-in nuts (correctly aligned depending on the thread pitch and wood thickness) into a block of wood from both sides, the thread would be resilient in both directions.
Excellent idea. Also, this video is a great tutorial for others wishing to make how-to videos with no narration. I find that most do not take the patience and care to make them engaging and instructive. Very well done.
I just came upon your channel. I could watch your videos for hours! I probably have. 🤣 AMAZING job!!! I will certainly be building a lot, if not all, of these for my shop. Great job!
Great job!. Finally somebody out there doing something new and interesting don't understand New keyboard lnxstructlions though totally different? What's up with that?
При нынешних космических ценах на все, такие приспособления из доступных материалов очень полезны, спасибо за примеры, ещё бы чертежи с размерами! Журнал Моделист- конструктор не купить!
Тиски хороши, слов нет. Но выгибает из не слабо. Думаю будет лучше из бакелитовой фанеры, ну и основание усилить, например две узкие полоски по которым скользит губка, сделать шире.
Нельзя делать выпирающий железный винт (выступающий за габариты тисков) на деревяных тисках . Идея очень хорошая , но фиксирующий винт должен быть вне рабочей зоны .
Just so confusing I know different language but usually I can just push the button to say put into English but the whole bunch of crap comes in the way. What's up with that.?
Very well done video; thank you for proving that most background music is detrimental to the quality of the video. I get so tired of watching videos with background music that nobody did any sound check on and of course it sounds like poop. People need to learn that the background music can either make or break their video and they need to do some careful checking to see if the video wouldn't be much better without background music. I'm going to make one of these.
bonjour, travaux intéressant pouvez vous m'envoyer les dimensions ou Plan S'il vous plaît je désirerais en fabriquer un modèle pour ma personne merci d'avance après réception de vôtre réponse je vous enverrais mon adresse Mail s'il faut amicalement Alain
Ты гений, брат! Реально вдохеовляешь!
Я обязательно сделаю такие тиски.
Спасибо Тебе.
Это называется "Параллельные тиски", в просторечии "Станочные". Созданы в начале технического развития человечества, металлическую версию этих тисков можно найти в продаже. Делать такие вещи из деревяшки вряд ли имеет смысл, лёгкие, неточные, неустойчивые, непрочные, а мороки на изготовление много.
Инопланетяне не поставили ещё, хотя бы одну, стальную направляющую чуть ниже затяжного винта, как это делается на обычных тисках, болтанки было бы меньше.
Excellent device & well-recorded. And thank you SO MUCH for not contaminating your video with a distracting, irritating & totally unnecessary music bed!
A wooden vice like this is a wonderful thing.
I particularly like this version because of its versatility.
An idea:
If you insert 2 drive-in nuts (correctly aligned depending on the thread pitch and wood thickness) into a block of wood from both sides, the thread would be resilient in both directions.
Thank you for your good comments.
I will pay more attention.👌😌
@@HammerSound망치소리 I have to thank.
This is new and great, but because berk plywood is hard to find and expensive, I will make one from solid wood thanks for sharing from Mexico.
👍👍😉
Que maravilla de idea
Gracias por su video
😊 5+!
Очень полезный и универсальный инструмент. Благодарю за видео.
Спасибо. Хорошего дня.
Thank you!
Идея хорошая, но, по моему, одного болта для фиксации маловато.
Tomorrow, for sure. Best one on the net.
Pulito,ordinato, efficace....bravo!!!
Красота! Спасибо!
Leave the locking bolt out, and you can grip tapered or non-parallel items, too!
Brilliant design and a great video.
Brilliant design and a great video.
WOW! Simple Yet Amazing! 👍😎
Мастер ! Молодец ! И я такие себе сделаю . Но немного внесу свои изменения . Удачи .
Excellent idea. Also, this video is a great tutorial for others wishing to make how-to videos with no narration. I find that most do not take the patience and care to make them engaging and instructive. Very well done.
Brilliant-I need to make one of these for my own shop.
You are a absolute genius my friend
On the flat side you could use the router bit to punch cone shaped holes of different sizes, making it possible to hold spherical objects as well.
Describing this masterpiece tool as perfect innovative is an understatement.
FABULOUS!!!
Thanks a lot!
✅✅✅✅✅✅✅✅✅☑
Sehr gut gefilmt.
Guter Aufbau.
Zuerst die Funktion, dann die Herstellung.
Selbstverliebte Geldgrapscher machen es immer anders herum.
Верно. Это редко встретишь в наше время.
Muy buena idea
My next job, great idea, thanks, Stewart, south west Australia.
Fantastic...
Jazak-Allah
Amazing friend, you can measure the idea
Simple y llanamente FAN -´TÁS - TI - CO !!!
I just came upon your channel. I could watch your videos for hours! I probably have. 🤣 AMAZING job!!! I will certainly be building a lot, if not all, of these for my shop. Great job!
muito bom gostei
Great design!
Супер тиски! Побежал себе такие делать!
Very nice!
Eccellente!!!
This is very cool! Do you have any detailed plans?
Anyway keep up the good work I will look at your other videos and just watched and not comment
That is a very interesting vice
Impresionante
woooo thank you so much, great idea
thank for share
Thank you for watching.
Very nice idea. I think if you use 2 pins, you dont need to look for your allen key. Just insert the 2 pins to lock the square
👍😉Thank you for your good comments.
Or four...(was my first thought...)
Like the original idea and
Yours too👍
AB
Great job!. Finally somebody out there doing something new and interesting don't understand New keyboard lnxstructlions though totally different? What's up with that?
Супер
Another wonder idea & Video
👍😉
Классно, продумано.
5+++.
супер, я себе такие же напилю. спасибо.
Excelente muy bueno pero carece de lo más importante las medidas, muchísimas gracias
Thank you for your good comments.
I will pay more attention.👌😌
Точно так!Это высокие лучшие технологии инопланетян ! 😄😄😄😄😄😆😆😆😆😆😅😅😅😅😅
Very nice, but in my shop in the summer it would bind up solid and be unusable from the humidity.
It's like a Kurt vise that's used for metal working.
I will copy your idea, and some of your others, very good video's... Thanks
Any ideas? Please let me know too.
Do you have plans available for purchase?
Keren masse,,kreatif
Металлические тиски с механизмом быстрой фиксации поворотной губки очень бы пригодились😊
Einfach Genial👍👍
😉👍
Muito prático.
Thank you. Have a good day
Спасибо за отличное видео,очень всё понятно и детально показано!!! Скоро тоже себе буду делать, такое же,замечательное,функциональное устройство !👍👍👍
При нынешних космических ценах на все, такие приспособления из доступных материалов очень полезны, спасибо за примеры, ещё бы чертежи с размерами! Журнал Моделист- конструктор не купить!
Так под себя делай
Nos puedes facilitar las medidas por favor
👍
A vise without vice.
А что не из пластилина ?
Wie heisst der Außerirdische?
Esse tipo de morça é que estava pensando Adélio do Brasil
👍👍🤘
Тиски хороши, слов нет. Но выгибает из не слабо. Думаю будет лучше из бакелитовой фанеры, ну и основание усилить, например две узкие полоски по которым скользит губка, сделать шире.
Enable playback on external websites please. We'd like to share this video.
Нельзя делать выпирающий железный винт (выступающий за габариты тисков) на деревяных тисках .
Идея очень хорошая , но фиксирующий винт должен быть вне рабочей зоны .
Толково...!
!!!
🙏👏👍💪
押さえる側も溝を切った方がいいよね。だから出来としては90点。
Это у инопланетян в д. саду преподают🤣
Just so confusing I know different language but usually I can just push the button to say put into English but the whole bunch of crap comes in the way. What's up with that.?
😮👍🏻👏🏻🇪🇨🍻
I see that the aliens have not discovered the fractal vice yet.
Genial amigo colega
Complimenti bel prefetto bravo 👁👍👁
😂
Доктора , доктора скорее.
万力は固定しないと意味ないぞ
Very well done video; thank you for proving that most background music is detrimental to the quality of the video. I get so tired of watching videos with background music that nobody did any sound check on and of course it sounds like poop. People need to learn that the background music can either make or break their video and they need to do some careful checking to see if the video wouldn't be much better without background music. I'm going to make one of these.
[jhjifz gjltkrf
Мне понравилось
bonjour, travaux intéressant pouvez vous m'envoyer les dimensions ou Plan S'il vous plaît je désirerais en fabriquer un modèle pour ma personne merci d'avance après réception de vôtre réponse je vous enverrais mon adresse Mail s'il faut amicalement Alain
они-же мягкие как тёплое гавно, там люфты ппц!
сам щось можиш робити окрім теплого гімна
А тебе что на них сотки ловит))))))))))))))
@@user-sg2nz9mp3z ... а иначе на корабль они нужны?