This is a very timely message, our lives can and do change in one second, on a dime and the only thing we can control is our reaction to it. In this era of high-tech, the buzz about AI - our humanity, decency, our innate creativity still remains the driving force of what the future will be. All the equipment, the software, all the tools would sit idle without our imagination and creativity. Great story Titan - we need more people like you in this world.
Titan Ty Gilroy my brother….please don’t listen to these fools. What you and your team are doing is incredible. You and Your team are making history, nobody has ever seen anything like it. I really don’t know what kind of person would criticize what you are doing. So please, don’t waste a second of your life paying attention to them. What you are doing is so much bigger, and I guarantee you that for each one of them there is 100,000+ of us who appreciate you and are thankful. You’ve changed so many lives for the better .Those who don’t like you don’t have to watch you. And remember that in addition to your family, your team etc. You have people who appreciate you around the world. And that’s priceless! Peace.
Thanks for sharing your story. Those are some powerful words. There are those that would dismiss it all as coincidence. But us that have faith know better. More power to you brother, thanks for hanging in there so you can give to others.
So true an we also went through the hards times then in our shop. We had a fire come into our shop from a business next to ours an at the same time a pipe broke in our house flooded 3/4 of it to the irs audit an was the time that we just wanted to give up. I was down from 5 employees to just 1 cause at the time none of us even had a place to work an when the fire department said we couldn't go back in the shop an remove our stuff I was like that is what you think an we got some friends an while they was still putting out the fire we was moving all the stuff outside lol. Had to let the guys go so they could get other jobs an I could find a place to move my stuff in pick up the peaces of what was left an move on. Was praying for every day to get better and it did an now 13 14 years later we are still going an can't thank the good lord for all he has done to get us through the hard times. We need him more today in our lives with all that is going on in the world today. Stay safe guys an God bless.
This message is so relevant in my life right now. I've been fighting, battling to move forward. Today I had the HMRC on the phone and one of our equipment financers along with 3 quarters due on rent, it's a tough place right now. Really tough, but I believe I can get through it, there is light at the end of the tunnel
Titans formula is an impeccable matrix of SBTF ,sweat blood tears & faith I would back up your Squadron who are patriotic Machinist, Titan keep on B🌎🌏ming ON
As a custom auto/motorcycle painter/airbrush artist - I had so many bogus deals after things started to ramp up business wise that I had to just call it quits / be the bad guy and tell everyone to fawk off..... Maybe that's that hardship you're referring to but,, If I ever get back into it , I will definitely have to adopt a different business plan....
My company just got bought by Tinicum/Dexter. Not because we are failing, but because we are succeeding and the owner gave up because of all the regulations.
Titan. I need advice. My supervisor on Friday brought me into the office and gave me a note with a company name and phone number. He said works a little slow you should check this place out. I then went for a job interview later that day. Bare in mind i have been working at this current place for 4 years. Tomorrow i will go to work and possibly quit and go to this new place. Im nervous i don't know how to think about it. Im garenteed a job at this other place but working at this place for 4 years , its like home.
Whatever you do, don't make a choice based on loyalty. Loyalty will hold you back. You need to make a decision based on your happiness, financial needs as well as how you want to grow professionally. Do you think working there will suck? Does this new place offer you more financial freedom? More opportunities to learn the trade that will be useful in the future? That being said, from your write up, I would consider two additional things: -An employer who goes out of their way to provide you with avenues for the growth of your career seems like a good place to work at. Might be worth staying there if it's not stunting the growth of your career, or if you're already in a comfortable place. -Is it possible that "work is a little slow" means that maybe you won't be needed soon? Maybe it's a sinking ship and he's giving you an out?
If your supervisor is doing this then he's telling you it's time to go, he isn't firing you, he is setting you up with a company he thinks you'll be a good fit with because he sees your talent or potential.
Well, I will tell you this so you can prepare if you work with custom inserts from Kennametal. Start working with sandvik or someone because they have literally closed the only customs inserts plant they had. Just a friendly piece of advice for anyone.
Titan, thank you for sharing this wonderful story with people! It inspired hope and courage as well as being incredibly powerful in your declaration of having faith. God and Jesus will always protect and guide you and your family, and you shall never be let down in any way!!
GOD always has a master plan for us. We may not understand why we go through the tough times when we do but we always take a turn for the better after learning from that prior event. Servicing others is where it’s at. Loved your story. It’s a powerful one indeed and very inspiring. Much love and gratitude.
Hi Titan. Great story and as always inspiring. Thank you. P.S. One question . Is there a reason why you are going in oposit direction when cutting material. Is that recording thing or you are doing that on purpose if so can you explain what is the reason. Thank you. Salute.
idk why but this just was on my youtube when i woke up randomly and im going into areospace not now but within 10 years in the future if im still alive
John 21:15 - "...Lovest thou me more than these" Great part of scripture. The Lord always always provides a way. Reminds me of another scripture. 1 Corinthians 10:12-13 "Wherefore let him that thinketh he standeth take heed lest he fall. There hath no temptation taken you but such as is common to man: but God is faithful, who will not suffer you to be tempted above that ye are able; but will with the temptation also make a way to escape, that ye may be able to bear it." Amen
Inspirational brother ..God first the rest will follow..I would however like however to speak to you..is thAt doable ? Need your insight o few things ...
Titan, I know very little of your industry, however we all have fight this life we have blessed with.prayers help. Pray daily. Please read ephesians 6:10 and keep on fighting. God bless. Oh bye the way I love your RUclips videos.
You give me incouragement, I have a dream and eventough I am disabbled now I know that if I depend on god he will fulfill these dreams in his own way. This became apparent in my life that when I quit praying for what I wanted in the partner god had for me less than 8 months later he placed the perfect person in my lap and said to me 2 simple words 'This one"! This person and I had been friends for 8+ years and neither one of us ever considered the other for more than a best friend. Life happened and less than 3 months after we met for the first time. Yeah we were online friends for years; we were married this was for us just shy of a year ago. Every day we work on our dream of us and never letting things just become rote. Getting into a coumphertable existence and just going with it does not glorify god as we will never realise the dreams we have that were placed in our hearts by god.
God bless you and all your employees, prayers do help. Keep doing what you love and help the ones you love. Way to many of the younger people, ( and some older ones ) feel that everything should be just handed to them. NO NO. You have to work hard and pray even harder.
So you don't do jobs for Blue Origin and Space-X any more??? I'm asking because in one of the recent videos he said that you lost a big aerospace contract or a customer. That was very confusing and sad to hear.
That was a machine shop story from the past probably. We stepped away for a while to dedicate ourselves to teaching and building curriculum. Thanks for your support
I watch some of these videos just for titans stories, but they got me thinking, why machining big chunks of metal when you can cast metal into any shape? Thus the whole process being more efficient. I really want to know the reason
Casting only offers tolerances for rough measurements. CNC machining can take pieces to 1/10,0000 of an inch. This is a cliff note reason why you need to cnc
It depends on the volume. A small quantity is not more effective to cast (and then machine). Until you reach break-even, when you get the same price per piece there is a lot of room for optimizing the machining from blanks, such as different tools, parameters, machines, etc. In the automotive industry casting is the default. In the rocket-motor industry the cutting.
You can chase the micron on CNCs if you really want to, but never will with casting, casting still has post processing and can still have voids/inconsistencies. Material properties are slightly different or vastly different and need more processing to get to the same/ similar as just cutting a block. Molds need to be made still.
@@barrysetzer well even the big block is still a casting. It's melted metal poured into a big block shape, they didn't dig it from nature like that. Some said about precision. A mold keeps its shape all time, right? Why chase microns with a cnc when you can have the same cast over and over again.
Hey Titan, sorry if it sounds like I just woke up (just woke up and retired ten years) but why couldn't you supply the blog links to what we stopped surfing for to listened to your constant search for a better life? I understand why you don't use coolant for filming but are the parts you're creating just junk or are the bits or tools useless and you're just making chips? Can't you use coolant with compressed air to keep the camera clean and the parts and chips cool? Goin back to bed, thanks.
Some materials (steel, cast iron, Aluminum) can be machined dry, but is not always optimal for finish or tool life. Other materials cannot be cut dry at all for many reasons. It IS possible to compressed air for keeping the camera/parts clean, but is not as good for filming as dry machining.
This is a very timely message, our lives can and do change in one second, on a dime and the only thing we can control is our reaction to it. In this era of high-tech, the buzz about AI - our humanity, decency, our innate creativity still remains the driving force of what the future will be. All the equipment, the software, all the tools would sit idle without our imagination and creativity. Great story Titan - we need more people like you in this world.
Thank you, Titan. As Karlo said below, this is a very timely message. Keep up the amazing work.
Titan Ty Gilroy my brother….please don’t listen to these fools. What you and your team are doing is incredible. You and Your team are making history, nobody has ever seen anything like it. I really don’t know what kind of person would criticize what you are doing. So please, don’t waste a second of your life paying attention to them. What you are doing is so much bigger, and I guarantee you that for each one of them there is 100,000+ of us who appreciate you and are thankful. You’ve changed so many lives for the better .Those who don’t like you don’t have to watch you. And remember that in addition to your family, your team etc. You have people who appreciate you around the world. And that’s priceless! Peace.
Thanks Brother… Love You
Thanks for sharing your story. Those are some powerful words. There are those that would dismiss it all as coincidence. But us that have faith know better. More power to you brother, thanks for hanging in there so you can give to others.
Best Inspiring story for everyone...
So true an we also went through the hards times then in our shop. We had a fire come into our shop from a business next to ours an at the same time a pipe broke in our house flooded 3/4 of it to the irs audit an was the time that we just wanted to give up. I was down from 5 employees to just 1 cause at the time none of us even had a place to work an when the fire department said we couldn't go back in the shop an remove our stuff I was like that is what you think an we got some friends an while they was still putting out the fire we was moving all the stuff outside lol. Had to let the guys go so they could get other jobs an I could find a place to move my stuff in pick up the peaces of what was left an move on. Was praying for every day to get better and it did an now 13 14 years later we are still going an can't thank the good lord for all he has done to get us through the hard times. We need him more today in our lives with all that is going on in the world today. Stay safe guys an God bless.
This is really good news. For the current environment, we need to work hard and not treat it negatively.
This message is so relevant in my life right now. I've been fighting, battling to move forward. Today I had the HMRC on the phone and one of our equipment financers along with 3 quarters due on rent, it's a tough place right now. Really tough, but I believe I can get through it, there is light at the end of the tunnel
Good luck buddy
@@youtubeconnollyfamily Thank you
Dreams transpire through pain, so true, love you Titan!
Titan:Very inspirational story. Bless you good sir. Most lesser men would have been broken by such events. May you always keep the chips flying!
Thanks for the encouragement may God continue to give you wisdom
Titans formula is an impeccable matrix of SBTF ,sweat blood tears & faith
I would back up your Squadron who are patriotic Machinist, Titan keep on B🌎🌏ming ON
To God be the Glory my friend!
What a charge!!! Every presentation is inspiring! Thank you!
Truly awesome brotha!🙏
Much love and Aloha from Hawaii.! Hope you keep up the amazing work you do.
Thanks Braddah🤙
As a custom auto/motorcycle painter/airbrush artist - I had so many bogus deals after things started to ramp up business wise that I had to just call it quits / be the bad guy and tell everyone to fawk off..... Maybe that's that hardship you're referring to but,, If I ever get back into it , I will definitely have to adopt a different business plan....
Loved the story and God Bless You Titan , BOOM 💥
My company just got bought by Tinicum/Dexter. Not because we are failing, but because we are succeeding and the owner gave up because of all the regulations.
Good for you, that is something to be very proud of
Thanks for this video. I really needed to hear these words
You never stop learning when titans involved
Thanks for sharing this 🙌
Thanks for sharing
Amazing message!
Thanks for the message. It was touching.
Thank you for telling this story.
You inspire me Titan . Thanks ❤
Awesome message! Thanks!
thanks you titan!
I needed to hear this...
Awesome story Titan!
Вперёд и только вперед👍
@Titan thank you for such a great video ✊️😎👊 BOOM
Love these stories. Better than HBR. Wish more industries did this. Keep hogging that material!
Brilliant stuff!!
Titan. I need advice.
My supervisor on Friday brought me into the office and gave me a note with a company name and phone number.
He said works a little slow you should check this place out. I then went for a job interview later that day.
Bare in mind i have been working at this current place for 4 years.
Tomorrow i will go to work and possibly quit and go to this new place.
Im nervous i don't know how to think about it.
Im garenteed a job at this other place but working at this place for 4 years , its like home.
Whatever you do, don't make a choice based on loyalty. Loyalty will hold you back. You need to make a decision based on your happiness, financial needs as well as how you want to grow professionally. Do you think working there will suck? Does this new place offer you more financial freedom? More opportunities to learn the trade that will be useful in the future?
That being said, from your write up, I would consider two additional things:
-An employer who goes out of their way to provide you with avenues for the growth of your career seems like a good place to work at. Might be worth staying there if it's not stunting the growth of your career, or if you're already in a comfortable place.
-Is it possible that "work is a little slow" means that maybe you won't be needed soon? Maybe it's a sinking ship and he's giving you an out?
If your supervisor is doing this then he's telling you it's time to go, he isn't firing you, he is setting you up with a company he thinks you'll be a good fit with because he sees your talent or potential.
@@S14zenkiQs Or, is he trying to get rid of him in a nice manner?
Do whats best for u, not ur boss.
@@S14zenkiQs lol hes been there 4 years, and wants to let him go now? Dumb
Well, I will tell you this so you can prepare if you work with custom inserts from Kennametal. Start working with sandvik or someone because they have literally closed the only customs inserts plant they had. Just a friendly piece of advice for anyone.
Titan, thank you for sharing this wonderful story with people! It inspired hope and courage as well as being incredibly powerful in your declaration of having faith. God and Jesus will always protect and guide you and your family, and you shall never be let down in any way!!
You are great..
Saw the video. What is special in your workshop CNC setup than a another? I do not get it. Sorry for asking. Regards.
GOD always has a master plan for us. We may not understand why we go through the tough times when we do but we always take a turn for the better after learning from that prior event. Servicing others is where it’s at. Loved your story. It’s a powerful one indeed and very inspiring. Much love and gratitude.
Thank you! We have cnc machines that don't run at nite
Hi Titan. Great story and as always inspiring. Thank you. P.S. One question . Is there a reason why you are going in oposit direction when cutting material. Is that recording thing or you are doing that on purpose if so can you explain what is the reason. Thank you. Salute.
Climb milling. Generally done on CNC as it is easier on tooling.
If work is slow they will cut cost, sounds like your boss is taking care of a good employee. Choice is yours.
idk why but this just was on my youtube when i woke up randomly and im going into areospace not now but within 10 years in the future if im still alive
John 21:15 - "...Lovest thou me more than these"
Great part of scripture. The Lord always always provides a way. Reminds me of another scripture.
1 Corinthians 10:12-13 "Wherefore let him that thinketh he standeth take heed lest he fall. There hath no temptation taken you but such as is common to man: but God is faithful, who will not suffer you to be tempted above that ye are able; but will with the temptation also make a way to escape, that ye may be able to bear it."
Amen
Inspirational brother ..God first the rest will follow..I would however like however to speak to you..is thAt doable ? Need your insight o few things ...
Thank you
Titan, I know very little of your industry, however we all have fight this life we have blessed with.prayers help. Pray daily.
Please read ephesians 6:10 and keep on fighting.
God bless. Oh bye the way I love your RUclips videos.
I can't help but picture Peter Weller talking
Karma = BOOM! 👊
You give me incouragement, I have a dream and eventough I am disabbled now I know that if I depend on god he will fulfill these dreams in his own way.
This became apparent in my life that when I quit praying for what I wanted in the partner god had for me less than 8 months later he placed the perfect person in my lap and said to me 2 simple words 'This one"! This person and I had been friends for 8+ years and neither one of us ever considered the other for more than a best friend. Life happened and less than 3 months after we met for the first time. Yeah we were online friends for years; we were married this was for us just shy of a year ago.
Every day we work on our dream of us and never letting things just become rote. Getting into a coumphertable existence and just going with it does not glorify god as we will never realise the dreams we have that were placed in our hearts by god.
God bless you and all your employees, prayers do help. Keep doing what you love and help the ones you love.
Way to many of the younger people, ( and some older ones ) feel that everything should be just handed to them. NO NO. You have to work hard and pray even harder.
Links please to episode 19 and 20.can’t find them with hundreds of videos
Thank you Jesus
I thought Blue Origin was in Kent Washington
Good marketing
I would love to work there
Maybe you already do but you should give motivational speeches.
The Lord still makes a way, even in these days
But not for the 20,000 kids that die every day of starvation. But getting a machine shop a lucrative contract? Sure
“Hey Jeff Bezos? Where are my BE-4 engines? “ - Tory Bruno CEO, United Launch Alliance (ULA).
Didn’t say that… mentioned a different one in southern CA
@@TITANSofCNC my bad, corrected…. Great to hear your working for them!!!
BOOM Man
California thats 90percent of your problem
So you don't do jobs for Blue Origin and Space-X any more??? I'm asking because in one of the recent videos he said that you lost a big aerospace contract or a customer. That was very confusing and sad to hear.
That was a machine shop story from the past probably. We stepped away for a while to dedicate ourselves to teaching and building curriculum. Thanks for your support
Christ is the King of Kings and Lord Lord of Lords
YOU MACHINE PARTS FO SPACE X? WATTT HAHAHAAA bruh, My friends ( CLASSIFIED )
How I would like to work for you and learn cnc
What are the point of these videos?
I watch some of these videos just for titans stories, but they got me thinking, why machining big chunks of metal when you can cast metal into any shape? Thus the whole process being more efficient.
I really want to know the reason
Casting only offers tolerances for rough measurements. CNC machining can take pieces to 1/10,0000 of an inch. This is a cliff note reason why you need to cnc
It depends on the volume. A small quantity is not more effective to cast (and then machine). Until you reach break-even, when you get the same price per piece there is a lot of room for optimizing the machining from blanks, such as different tools, parameters, machines, etc. In the automotive industry casting is the default. In the rocket-motor industry the cutting.
You can chase the micron on CNCs if you really want to, but never will with casting, casting still has post processing and can still have voids/inconsistencies. Material properties are slightly different or vastly different and need more processing to get to the same/ similar as just cutting a block. Molds need to be made still.
Castings are not as strong as solids
@@barrysetzer well even the big block is still a casting. It's melted metal poured into a big block shape, they didn't dig it from nature like that. Some said about precision. A mold keeps its shape all time, right? Why chase microns with a cnc when you can have the same cast over and over again.
Titian ,Jesus Christ handles the details
& we here are, 2023, & BO, STILL hasn't put anything in Orbit, not 1 KG !
Hey Titan, sorry if it sounds like I just woke up (just woke up and retired ten years) but why couldn't you supply the blog links to what we stopped surfing for to listened to your constant search for a better life?
I understand why you don't use coolant for filming but are the parts you're creating just junk or are the bits or tools useless and you're just making chips? Can't you use coolant with compressed air to keep the camera clean and the parts and chips cool? Goin back to bed, thanks.
Some materials (steel, cast iron, Aluminum) can be machined dry, but is not always optimal for finish or tool life. Other materials cannot be cut dry at all for many reasons. It IS possible to compressed air for keeping the camera/parts clean, but is not as good for filming as dry machining.
PTL
So god did it lol. Ok
Prayer is powerful. The Lord listens
Would love to hear how much your companies worth…..enlighten us
🤣🤣🤣🤣😂😂😂🤣🤣🤣
God is good
👌👍👍👍👍👍🥇